03-04-2015
Googling the NVRAM u2103 error seems to indicate your nvram battery is dead. The portion saying "nvram parameters to default values" backs that up. I'm not sure, but most systems have you start your RAM at slot 0 and increment. It may be that this machine had BIOS settings turning off those first RAM slots, but I'd start by looking for the battery on your motherboard, finding a new one and replacing it, and if you get issues with the RAM, try relocating them to slots 0-2 instead of 5-7.
As for the firmware password, Googling that problem indicates you can create a special boot disk if you have access to ANOTHER Sun Sparc 30 (which I'm guessing you don't) or you can replace the boot prom completely. it's Part #525-1669 and you may be able to find one online somewhere. I have zero experience and would be discouraged if I were in your shoes looking at this problem, sorry. I just did some quick Googling for you and have to deal with a couple older Sun machines at work (and wish I didn't have to... lol)
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
Hello everybody!!
I need your help again.
I am using Sun Ultra sparc 60 machine.Follwing are the types of files getting generated in /var/tmp.
"windu_sm_o aaaa,baaa,caaa,daaa" etc.
I am not able to locate which application is generating these files.
Can I straightway delete these files ? or... (1 Reply)
Discussion started by: vikasdeshmukh
1 Replies
2. UNIX for Advanced & Expert Users
Dear All,
I have trouble, I have SPARC Machine and when start for loading, can not finish !
this is copy off message from my system
Netra t 1120/1125 (UltraSPARC-II 440MHz), No Keyboard
OpenBoot 3.31, 512 MB memory installed, Serial #12116535.
Ethernet address 8:0:20:b8:e2:37, Host ID:... (4 Replies)
Discussion started by: heru_90
4 Replies
3. Solaris
I have an ultra sparc 2 with no video - I connect to it with hyperterm.
Is there a way to get to the OK prompt? I have tried control/break and that does not work.
If not is there a video card I can get to put in this box?
I have Solaris 10 installed on this machine.
Thanks (7 Replies)
Discussion started by: tribbles
7 Replies
4. Solaris
In Sparc Ultra 45 machine, how to enable bge1 port, how to do if bge0 is down then bge1 should automatically up.
Thanks & Regards (2 Replies)
Discussion started by: durgaprasadr13
2 Replies
5. Solaris
Hi Gurus,
Can I use null modem cable in Ultra sparc 10 workstation
Thanks (3 Replies)
Discussion started by: kumarmani
3 Replies
6. Debian
Comments/Problems:
Machine boots from CDROM, starts SILO Version 1.4.13,
display welcome message (welcome to Debian GNU/Linux lenny!
built on 20081218-10:06 ).
boot:
Allocated 8 Megs of memory at 0x40000000 for kernel
Loaded kernel version 2.6.26
Loading initial ramdisk... (3 Replies)
Discussion started by: mtk
3 Replies
7. Solaris
Dear Guru,
My boss has a plan to upgrade cpu of server so he needs to know how much better performance(percentage) is Ultra SPARC IV+ 1.95 GHz than Ultra SPARC IV 1.35 GHz?.
I am looking for documentation to reference but I didn't see anything close to my point. If who know,... (3 Replies)
Discussion started by: unitipon
3 Replies
8. Solaris
Hi all.
I am seeing in one of our less-used servers that it crashed and now won't restart. I get the message 'continue with normal startup or boot into maintenance mode'.
I go into maintenance and run fsck on /usr0 (mentioned in error at restart) it then reboots but goes right back to... (3 Replies)
Discussion started by: jamie_collins
3 Replies
9. Solaris
I'm trying to install a PGX32 video card on my Sparc 10 Ultra running Solaris 10.
I've got the Oracle installation guide for it and I got as far as:
"4. Insert the CD-ROM labeled “GFX OpenWindows for Solaris 2” into the drive."
I don't have a CD-ROM by that name and a web search for that... (21 Replies)
Discussion started by: Michele31416
21 Replies
10. UNIX for Beginners Questions & Answers
-> start /SYS
Are you sure you want to start /SYS (y/n)? y
Starting /SYS
]-> show HOST
/HOST
Targets:
bootmode
diag
domain
Properties:
autorestart = reset
autorunonerror = false
bootfailrecovery = poweroff
... (29 Replies)
Discussion started by: z_haseeb
29 Replies
PMU(4) BSD Kernel Interfaces Manual PMU(4)
NAME
pmu -- support for Power Management Units found in all Apple laptops and some desktop Power Macintosh computers
SYNOPSIS
pmu* at obio?
nadb* at pmu?
battery* at pmu?
smartbat* at pmu?
DESCRIPTION
The pmu driver provides support for the Power Management Unit found in Apple laptops and some desktop Power Macintosh computers. Functions
controlled by the PMU include the real time clock, ADB, power, batteries, on some laptops like the PowerBook 3400c and similar machines it
also controls hotkeys and display brightness, on others it provides an iic(9) bus and on some it controls CPU speed. On many older machines
it also provides access to some non-volatile memory and thermal sensors. Not all those features are present on all machines, for instance
Power Macintosh G4 and later machines don't have ADB, many more recent laptops have display brightness and backlight control built into the
graphics controller instead of the PMU, only a few older PowerBooks use the PMU for CPU speed control and newer machines use a different way
to access non-volatile memory. However, all known PMUs so far provide a real time clock and power control.
Notes by model
Real time clock and power control are present and supported on all machines that can run NetBSD/macppc, ADB is supported when present.
PowerBook 2400, 3400c, and 3500
Battery status and thermal sensors found on the mainboard and in the battery pack are supported by the battery(4) driver, val-
ues can be read via envsys(4). Hotkeys for brightness control are supported, CPU speed control and parameter RAM are present
but unsupported.
Power Macintosh G4
ADB is not present, iic(9) is present but unsupported.
SEE ALSO
battery(4), cuda(4), nadb(4), nvram(4), obio(4), iic(9)
BUGS
Some features are currently unsupported, like the iic(9) bus, access to parameter RAM and CPU speed control.
BSD
May 14, 2007 BSD