02-22-2015
Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate terminal emulation) via a USB port. The machine came with no cables or adapters -I have located the right Sun DB9 to RJ45 crossover adapter which is usually shipped with the machine. I need to connect to that from the PC.
The USB to DB9 cables I am seeing for sale are USB to RS232 serial. I need some sort of DB9 receptacle to plug into the Sun crossover adapter the other side which connects to the serial management port on the T5140. I think I need USB straight "uncrossed over" wire to the Sun adapter somehow and am confused because these USB to RS 232 cables advertised are already "crossed over" which would result in inverting the signal twice. Sorry for my ignorance and confusion
, but I want to get this right.. Put simply-
What should I use to connect from my USB port to the Sun crossover adapter?
Thank you in advance.
joe
.
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
I've got a problem that I could really use some help on. What I'm trying to do is connect a Windows laptop to a Unix desktop in order to feed the unix information from a program that runs on the windows machine. I have the windows machine all set up. But I'm not sure what to do with the Unix box.... (2 Replies)
Discussion started by: GlockCW
2 Replies
2. Programming
I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows:
SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK);
write (SerialPort_Send, pCommandString, strlen (pCommandString));
... (2 Replies)
Discussion started by: ExDes
2 Replies
3. Red Hat
System: Red Hat Enterprise Linux WS release 4 (Nahant Update 6)
Any idea how to Determine if a Serial Port in Linux System is defective?
Issued "cat /proc/tty/driver/serial". see below.
~# cat /proc/tty/driver/serial
serinfo:1.0 driver revision:
0: uart:16550A port:000003F8 irq:4 tx:11... (0 Replies)
Discussion started by: etcpasswd
0 Replies
4. Shell Programming and Scripting
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies
5. Shell Programming and Scripting
Hi all:
i wanna automate a test written in Tcl, but stuck in serial communication.
I had 2 PC, one is my local Windows machine, the other one is my test Linux server. The Linux box is connected to the test board via serial port. So I wanna send commands and get output through the... (4 Replies)
Discussion started by: allenxiao7
4 Replies
6. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
7. Web Development
I am trying to write to a serial port and capture the reponse in a file -
adduser ethan dialout
The user `ethan' is already a member of `dialout'
root@meow:/home/ethan# ls -l /dev/ttyS0
crw-rw-r-- 1 ethan dialout 4, 64 Oct 7 20:55 /dev/ttyS0
$fh1 = fopen("/dev/ttyS0", "w+");... (74 Replies)
Discussion started by: Meow613
74 Replies
8. Solaris
In ubuntu etopic i create this udev rules for prolink 3g usb modem:
SUBSYSTEM=="block",
SUBSYSTEM=="scsi",
ATTRS{idVendor}=="1e0e",
ATTRS{idProduct}=="f000",
ACTION=="add",
RUN+="/sbin/modprobe usbserial Vendor=0X1e0e Product=0Xf000"
After plugging the usb modem, ubuntu assigns the ports... (4 Replies)
Discussion started by: shamsat
4 Replies
9. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
10. Linux
I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID... (7 Replies)
Discussion started by: rbatte1
7 Replies
UBSA(4) BSD Kernel Interfaces Manual UBSA(4)
NAME
ubsa -- USB support for Belkin serial adapters
SYNOPSIS
To compile this driver into the kernel, place the following lines in your kernel configuration file:
device ubsa
device ucom
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
ubsa_load="YES"
DESCRIPTION
The ubsa driver provides support for the USB-to-RS232 Bridge chip used by a variety of serial adapters from Belkin and other vendors.
The device is accessed through the ucom(4) driver which makes it behave like a tty(4).
HARDWARE
The ubsa driver supports the following adapters:
o AnyData ADU-500A EV-DO modem
o AnyData ADU-E100A (no EV-DO mode support)
o Belkin F5U103
o Belkin F5U120
o e-Tek Labs Kwik232
o GoHubs GoCOM232
o Peracom single port serial adapter
SEE ALSO
tty(4), ucom(4), usb(4)
HISTORY
The ubsa driver appeared in FreeBSD 5.0. The uplcom(4) manual page was adopted from NetBSD by Tom Rhodes <trhodes@FreeBSD.org> in April 2002
and modified for the ubsa driver by Alexander Kabaev <kan@FreeBSD.org> in October 2002.
AUTHORS
The ubsa driver was written by Alexander Kabaev <kan@FreeBSD.org>.
BSD
March 28, 2008 BSD