Solaris 11.2 does not assign serial port to 3g usb modem?
In ubuntu etopic i create this udev rules for prolink 3g usb modem:
After plugging the usb modem, ubuntu assigns the ports /dev/ttyUSB[0-2] to modem and pppd connect with these ports.
When i plug the this 3g usb modem in solaris 11.2 i didn't see any entry for this modem in /dev/cua and /dev/term, solaris 11.2 recognise the modem as usb storage and there is entry for it " 1e0e:f000" in /dev/usb.
please help me how i can get connected to my isp with this 3g usb modem in solaris 11.2?
Moderator's Comments:
Please use CODE tags (rather than ICODE tags) for multi-line sample input, output, or code.
Last edited by Don Cragun; 02-15-2015 at 11:51 AM..
Reason: Change ICODE tags to CODE tags.
Hi,
I have USB Siemens Santis 100 ADSL modem.I need driver for this modem on Solaris 10.Please help me with some info.Platform is x86.Thanks. (2 Replies)
Hello There,
I just wanted to know if there is any possible configuration for setting up my external USR USB Modem in Solaris 9 (x86). Any help is definitely appreciated.
Thanks
Khurram Bashir (1 Reply)
I have a serial modem connected to a usb port using an adapter cable. The system is a HP DL360. RedHat ES3.0
I am using the device /dev/ttyUSB0
When I issue the command "mgetty ttyUSB0" I get the following output in the log file.
How do I get the system to see the modem.
12/02 14:17:55... (2 Replies)
I currently access a remote Unix server which has an external modem connected to one of it's serial ports (/dev/cua/b). At times, this server undergoes a hard reset and for some reason this disallows us from making use of the modem any longer. A hard reset of the modem always seems to fix the... (0 Replies)
hi all,
I have been trying to setup network on solaris10 from a long time but am unable to do so..
I tried it with the ethernet card i have(dfe -520tx) but since i was not able to find drivers for that particular device, i thought of using the usb mode to run network..
However am not able... (0 Replies)
Hi,
I'mtrying to connect a Device via the serial port to my Solaris 10 environment (Sunfire V880).
I have setup ttyb to connect to the Device. I am getting a connected status in my Port Listing (Using a separate Module that I have in the app running in the environment) but the moment I try to... (0 Replies)
I did some unix admin many years ago, but since then I have been programming. I now have to install solaris 10 on a T42 via a console/serial cable.
Could anyone please provide some help on the following.
We have one solaris server up and going, I use Cygwin to get to this (xwin -query ...)... (2 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
hi,
I am new to solaris, i download the solaris 11.2 support library and as well search the google but didn't find any information about how to setup usb 3g modem in solaris 11.2, any one can please help me with giving any information or web link? (6 Replies)
I have someone wanting to connect to the serial management port of a switch from a PC running CentOS6. The management port on the switch is apparently baud 9600, 8 data bits, 1 stop bit & no parity They have plugged in a cable to connect and the output from lsusb is:-Bus 001 Device 001: ID... (7 Replies)
Discussion started by: rbatte1
7 Replies
LEARN ABOUT DEBIAN
baycom
BAYCOM(9) Kernel Reference Guide BAYCOM(9)NAME
baycom - amateur (AX.25) packet radio network driver for baycom modems
SYNOPSIS
#include <linux/baycom.h>
#include <linux/hdlcdrv.h>
DESCRIPTION
The driver currently supports three different modems: ser12, par96 and par97.
ser12
This is a very simple 1200 baud AFSK modem. The modem consists only of a modulator/demodulator chip, usually a TI TCM3105. The computer is
responsible for regenerating the receiver bit clock. The modem connects to a serial port, hence the name. Since the serial port is not used
as an async serial port, the kernel driver for serial ports cannot be used, and this driver only supports standard serial hardware (8250,
16450, 16550).
par96
This is a modem for 9600 baud FSK compatible to the G3RUH standard. The modem does all the filtering and regenerates the receiver clock.
Data is transferred from and to the PC via a shift register. The shift register is filled with 16 bits and an interrupt is signalled. The
PC then empties the shift register in a burst. This modem connects to the parallel port, hence the name.
par97
This is a redesign of the par96 modem by Henning Rech, DF9IC. The modem is protocol compatible to par96, but uses only three low power ICs
and can therefore be fed from the parallel port and does not require an additional power supply.
IOCTL CALLS
The ioctl calls follow the implementation in the hdlcdrv.
BAYCOMCTL_GETMODEMTYPE
returns the modem type (i.e. ser12 or par96) and the options in effect (currently only the source of the DCD signal)
BAYCOMCTL_SETMODEMTYPE
sets the modem type and the options. Only superuser can do this.
BAYCOMCTL_GETDEBUG
return some debugging values. Not always available.
SEE ALSO
baycom (9), soundmodem (9), linux/drivers/net/hdlcdrv.c,
AUTHOR
baycom was written by Thomas Sailer, HB9JNX/AE4WA, (t.sailer@alumni.ethz.ch).
Linux 2.1.x 2 October 1996 BAYCOM(9)