Solaris 11 iscsi chap auth Post: 302933526

Sponsored Content

Operating Systems Solaris Solaris 11 iscsi chap auth Post 302933526 by jm83 on Friday 30th of January 2015 10:39:50 AM

01-30-2015

Registered User

hi hicksd8

"Similarly, an iSCSI initiator may support host chap authenication and/or individual volume chap authenication."

thank you very much, i think that was the problem. i will try it for the next time when i set up a solaris 11.2 server.

the other problem is more complicated i think, that target portal will be shown (in the windows iscsi initiator) with the local ip 192.168.1.251... i can only access that target from my subnet with that target portal ip config!!

With the starwind solutions in windows, there is no ip in the target portal selectbox visible, i see just one entry "Default"...

And it's accessible via public internet. (port forwarding to server behind router with ip 192.168.1.251) comstar/solaris iscsi is not... when i install wireshark on the public internet client, i see some entries with 192.168.1.251... cannot work! ;-)

i do not use ssh or vpn channel for iscsi access via internet, but there is a ip-level firewall.

thx and have a nice day!

---------- Post updated at 05:39 PM ---------- Previous update was at 04:54 PM ----------

"the other problem is more complicated i think, that target portal will be shown (in the windows iscsi initiator) with the local ip 192.168.1.251..."

the problem is i can use nor a public ip neither a domain name with solaris' "itmadm modify-target"... it always need to set it to the local ip, which causes problem when i access in the public internet...

jm83

View Public Profile for jm83

Find all posts by jm83

9 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Solaris 10 auth issue

Very strange one, we've got a recently build server (Sol10 via JET flash). Bascially you can ssh to it fine, but telnet will allow entry of username, but will then feed in a carriage return on the passwd field, this also happens on any auth type command, ie passwd on a user account will also...

2. UNIX for Advanced & Expert Users

iscsi commands iscsiadm solaris 10

I'm running solaris 10 and this packages is installed SUNWiscsir - Sun iSCSI Device Driver (root) SUNWiscsiu - Sun iSCSI Management Utilities (usr) But the commands iscsiadm or iscsitadm dont work. He are not in my system. Do you know the problem.

3. Solaris

Solaris 10 10/08 sparc + iSCSI

hi, I have installed Solaris 10 10/08 on sparc machine. I would like to configure iSCSI on that to mount SAN Volumes. Is there any need to install any additional patches for iSCSI to work. Thanks, Prashant.

4. Solaris

iscsi device on solaris 10 (x64)

Hello! I have several disks discovered using iscsi protocol. There disks are represented in OS like c2txd0 . logs: Is it possible to change drive path, for example, from c2t6d0 to c2t7d0? It's important for me because I have to install oracle RAC on RAW devices. NIck

5. Solaris

Solaris 10 and DELL TL-2000 Tape Library with ISCSI

Hello, i am trying to get following configuration up running, but get no access to the library roboter. Server: SunOS 5.10 Generic_138889-03 i86pc i386 i86pc DELL TL-2000: 1 Tape: IBM ULT3580-HH4 and Robot: 3573-TL, connected via ISCSI Bridge (build into the TL) ...

6. UNIX for Advanced & Expert Users

Solaris 10 10/09 u8, iSCSI and SUN Trunking

I am running Solaris 10 on a V490. I have Dell EqualLogic SAN attached. I would like to take full advantage of the iSCSI initiator. I have a primary network interface and IP addresses for all four SAN ports. Since the four ports are SUN GigaSwift (legacy), I cannot utilize dladm, so I downloaded...

7. Solaris

Set up iscsi LUN on solaris 9?

Hi, I need to set up iscsi LUN on Solaris 9. I've done it on Solaris 10 with iscsiadm. How do you do it on Solaris 9 though? Currently using Solaris 9 update 2. Your help is appreciated. Thanks, Sparcman

8. UNIX for Dummies Questions & Answers

How to change ethernet cable of iscsi initiator (iscsi client)?

how to change ethernet cable of iscsi initiator (iscsi client)

9. Solaris

Can You Mount FAT32 iSCSI Target in Solaris 10 (sparc)?

I get "mount: I/O error" when trying to mount an existing FAT32 iSCSI target. I also tried formatting the iSCSI target with fdisk and got fdisk: "Error in ioctl DKIOCSMBOOT" Details -- According to the format command, the whole disk is allocated to slice 6 and /dev/rdsk shows this as:...

LEARN ABOUT DEBIAN

iscsi_initiator

ISCSI_INITIATOR(4)					   BSD Kernel Interfaces Manual 					ISCSI_INITIATOR(4)

NAME

     iscsi_initiator -- kernel driver for the iSCSI protocol

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device iscsi_initiator

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   iscsi_initiator_load="YES"

DESCRIPTION

     The iscsi_initiator implements the kernel side of the Internet SCSI (iSCSI) network protocol standard.  The userland companion is
     iscontrol(8), and permits access to remote virtual SCSI devices via cam(4).

SYSCTL VARIABLES

     debug.iscsi_initiator	set the debug-level, 0 means no debugging, 9 for maximum.

     net.iscsi.isid		the initiator part of the Session Identifier.

     The following are informative only:

     net.iscsi.driver_version	the current version of the driver.

     net.iscsi.sessions 	the number of current active sessions.

     net.iscsi.n.targetname	the target name of session n.

     net.iscsi.n.targedaddress	the IP address of the target of session n.

     net.iscsi.n.stats		statistics for session

     net.iscsi.n.pid		the process id of the userland side of session n, see iscontrol(8).

FILES

     The iscsi_initiator driver creates the following:

     /dev/iscsi      used to create new sessions.
     /dev/iscsi%d    for each new session.

SEE ALSO

     cam(4), camcontrol(8), iscontrol(8)

STANDARDS

     iSCSI RFC 3720

BUGS

     The lun discovery method is old-fashioned.

BSD
								    May 9, 2010 							       BSD