Hello,
Can someone please tell me which command to use to determine the available disk space on a given disk device?
I have to write a shell script that compresses files and stores them in a specific location but I am not sure how "conservative" I should be?
Thanks in advance!
Al. (4 Replies)
I am new to being a Unix admin and have a question about replacing some hardware. I have a K class box using HP-UX 10.20 with three disks. Two of the drives are in one logical volume. Every 3 or 4 days, the syslog is showing that one of these drives is experiencing "POWERFAILED" and then recovering... (6 Replies)
Hi people, I have been using my disk for quite a long time but the other day I heard the drive making some noise and had to restart the system again. But when I did that the disk would not boot and I fear that the data might be deleted or lost. So, if you people have any know about the ways to get... (1 Reply)
Hi people,
I have been using my disk for quite a long time but the other day I heard the drive making some noise and had to restart the system again. But when I did that the disk would not boot and I fear that the data might be deleted or lost. So, if you people have any know about the ways to... (2 Replies)
hi all,
have a solaris 9 OS and a SAN disk which used to work fine is not getting picked up by my machine. can anyone point out things to check in order to troubleshoot this ??
thanks in advance. (3 Replies)
in red hat 4, 5 any one know any commands or any scritps to monitor HP DL 380 G5/6 server and trigger alarm when hard disk failed.
thanks for all support
---------- Post updated at 02:45 PM ---------- Previous update was at 12:00 PM ----------
does HP ProLiant Support Pack support is... (4 Replies)
Hello guys,
I have two servers performing the same disk operations. I believe one server is having a disk's impending failure however I have no hard evidence to prove it. This is a pair of Netra 210's with 2 drives in a hardware raid mirror (LSI raid controller). While performing intensive... (4 Replies)
Hi there,
Don't know if my title is relevant but I'm dealing with dangerous materials that I don't really know and I'm very afraid to mess anything up.
I have a Debian 5.0.4 server with 4 x 1TB hard drives.
I have the following mdstat
Personalities :
md1 : active raid1 sda1 sdd1... (3 Replies)
Hi all,
I have encountered the issue with the hard disk, the disk is failed and need to replace by the new one.
As my understanding, this is just to take out the failed disk and insert the new ones, and that's all.
But the third party hardware vendor said, there should be another procedure... (9 Replies)
Discussion started by: Phat
9 Replies
LEARN ABOUT CENTOS
prtvtoc
prtvtoc(1M) System Administration Commands prtvtoc(1M)NAME
prtvtoc - report information about a disk geometry and partitioning
SYNOPSIS
prtvtoc [-fhs] [-t vfstab] [-m mnttab] device
DESCRIPTION
The prtvtoc command allows the contents of the label to be viewed. The command can be used only by the super-user.
The device name can be the file name of a raw device in the form of /dev/rdsk/c?t?d?s2 or can be the file name of a block device in the
form of /dev/dsk/c?t?d?s2.
OPTIONS
The following options are supported:
-f Report on the disk free space, including the starting block address of the free space, number of blocks, and unused parti-
tions.
-h Omit the headers from the normal output.
-m mnttab Use mnttab as the list of mounted filesystems, in place of /etc/mnttab.
-s Omit all headers but the column header from the normal output.
-t vfstab Use vfstab as the list of filesystem defaults, in place of /etc/vfstab.
EXAMPLES
Example 1: Using the prtvtoc Command
The following example uses the prtvtoc command on a 424-megabyte hard disk:
example# prtvtoc /dev/rdsk/c0t3d0s2
* /dev/rdsk/c0t3d0s2 partition map
*
* Dimension:
* 512 bytes/sector
* 80 sectors/track
* 9 tracks/cylinder
* 720 sectors/cylinder
* 2500 cylinders
* 1151 accessible cylinders
*
* Flags:
* 1: unmountable
* 10: read-only
* * First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 0 76320 76319 /
1 3 01 76320 132480 208799
2 5 00 0 828720 828719
5 6 00 208800 131760 340559 /opt
6 4 00 340560 447120 787679 /usr
7 8 00 787680 41040 828719 /export/home
example#
The data in the Tag column above indicates the type of partition, as follows:
Name Number
UNASSIGNED 0x00
BOOT 0x01
ROOT 0x02
SWAP 0x03
USR 0x04
BACKUP 0x05
STAND 0x06
VAR 0x07
HOME 0x08
ALTSCTR 0x09
CACHE 0x0a
RESERVED 0x0b
The data in the Flags column above indicates how the partition is to be mounted, as follows:
Name Number
MOUNTABLE, READ AND WRITE 0x00
NOT MOUNTABLE 0x01
MOUNTABLE, READ ONLY 0x10
Example 2: Using the prtvtoc Command with the -f Option
The following example uses the prtvtoc command with the -f option on a 424-megabyte hard disk:
example# prtvtoc -f /dev/rdsk/c0t3d0s2
FREE_START=0 FREE_SIZE=0 FREE_COUNT=0 FREE_PART=34
Example 3: Using the prtvtoc Command on a Disk Over One Terabyte
The following example uses uses the prtvtoc command on a disk over one terabyte:.
example# prtvtoc /dev/rdsk/c1t1d0s2
* /dev/rdsk/c1t1d0s2 partition map
*
* Dimensions:
* 512 bytes/sector
* 3187630080 sectors
* 3187630013 accessible sectors
*
* Flags:
* 1: unmountable
* 10: read-only
*
* First Sector Last
* Partition Tag Flags Sector Count Sector Mount Directory
0 2 00 34 262144 262177
1 3 01 262178 262144 524321
6 4 00 524322 3187089340 3187613661
8 11 00 3187613662 16384 318763004
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO devinfo(1M), fmthard(1M), format(1M), mount(1M), attributes(5)WARNINGS
The mount command does not check the "not mountable" bit.
SunOS 5.10 25 Jul 2002 prtvtoc(1M)