Yes, you are correct about the Mini-PC it does use a small 5-volt power supply. That could be a possibility I suppose...
Also, I'm pretty sure my dmesg output also gets saved to the messages log file like you had said. So I'll attach my /var/log/messages file.
I'm pretty sure the data from dmesg shows in /var/log/messages as "kernel: [#####.#####] ......" messages.
One thing about this file that you'll notice... Since the only way to really power-off the CuBox completely is to unplug the power from it after
issuing a shutdown, the current date and time are not kept up on during the boot up, and the actual time doesn't show in the log until the Network
is up and NTP has started.
So in the attachment you'll notice the start date during the bootup is 2014-07-08at 00:00:00... Then once NTP starts the time gets changed
to the actual time.
And of course, I just got back from my lunch break and before I left I rebooted the PC in hopes of stopping the issue and of course when I got
back all was fine. So I'll have to wait till it starts happening again to get those things you were asking about.
Also, the keyboard and mouse are just regular wired USB devices, so I'm not using wireless ones...
But here is the output from lsmod:
Thanks again Corona for the reply, much appreciated!
hi folks,
i've got a blank hp visualize C3000 workstation and installed HP-UX 11.11. When I want to start X, I get the following error message:
# X
Fatal server error:
Couldn't open X pointer device! Is one attached?
I've connected an mouse and a keyboard with an usb/ps2 connector.... (5 Replies)
Anyone ever had any problem related to wrist lesions caused by keyboard or mouse? Tendinitis? Tenosynovitis?
How long it lasted? How did it go away? (3 Replies)
Hi guys,
I've installed Solaris 10 (SunOS 5.10) in a x86 box. I will put this box as a home server to store my files/backups/whatterver shared stuff replacing my old NetBSD machine. But, after installed and correctly configured, when I tried to boot this box without keybord and mouse (USB both),... (4 Replies)
I need help from someone that is good at making scripts. I'm trying to make a script file that checks for keyboard and mouse activity during 1 am to 8 am and logs you off if it detects activity. I can't find anything useful in google.
---------- Post updated 06-30-10 at 12:33 AM ----------... (1 Reply)
hi
I've configured X Server using Video Configuration Manager on SCO 5.0.6, but the keyboard and mouse are freezing after 5 minutes on the graphical login mask.
---------- Post updated at 01:59 PM ---------- Previous update was at 02:43 AM ----------
BTW I finished the configuration,... (2 Replies)
Hello,
Just got a refurbished Pseries when I boot the machine , everything is okay, that is no attention light and panel shows
01 B N
but there is nothing on the display ( monitor / console ) which is plugged into the video card port of pseries. The display is empty....
The keyboard... (3 Replies)
I would like a script that would run pm-suspend if there has been no keyboard or mouse input for a specified time.
------ Post updated at 11:17 AM ------
Never mind. I found a setting in power management that does what I need. (0 Replies)