Sponsored Content
Full Discussion: Unable to create a SPOT
Operating Systems AIX Unable to create a SPOT Post 302927659 by bakunin on Thursday 4th of December 2014 10:56:41 AM
Old 12-04-2014
Quote:
Originally Posted by trivium012
So I'm guessing I really do have an NFS problem, but I have no idea how to troubleshoot this problem...
Again, you shouldn't (and need not) export anything by hand when you use NIM. Your exports file shows that a lot of directories are exported already. Some of them are probably exported by allocating NIM resources to machines, but some may be exported by hand.

If you use the NIM server alone or get some downtime for it: deallocate all resources at the NIM-server, then remove everything "/nim/..." (which i presume to be the root for your NIM resources) from the exports file. Always deallocate with the "force" option (otherwise that fails most of the times).

You might want to use something like:

Code:
lsnim -t standalone | while read system junk ; do
     nim -o reset -a force=yes $system
     nim -Fo deallocate -a subclass=all $system
done

Only then allocate resources again. These (and ONLY these) should appear in the exports file.

Next thing is to check the client you test with if the NIM connection is working. Quite often this is the problem. If you use "nimsh" check if the nimsh service is running on the client, otherwise you need a running rsh:

Code:
root@client # lssrc -g nimclient
 nimsh            nimclient        5505154      active

Now test this by placing a simple script (just put a "date" command into it, is enough) in "/nimres/scripts" (or somewhere, this is how i call the directory), add a nim resource of the type "script" and let it point to the script. Then test the client by

Code:
nim -o cust -a script=<scriptname> <client>

I hope this helps.

bakunin
 

10 More Discussions You Might Find Interesting

1. AIX

Unable to create a group

Hi, I'm trying to create a new group on an AIX 5.2.0.0. server but am getting the following error: root:/root $ mkgroup debt 3004-698 Error committing changes to "debt" : Value is invalid. I've change the group name to no affect. Does anyone have any ideas what could be causing this? ... (0 Replies)
Discussion started by: m223464
0 Replies

2. Solaris

unable to create flar

Hello friend, Now i'm doing JDS3.1 in v440 servers.while checking the lustatus command getiing out like this lustatus Boot Environment Is Active Active Can Copy Name Complete Now On Reboot Delete Status -------------------------- --------... (0 Replies)
Discussion started by: rjay.com
0 Replies

3. UNIX for Dummies Questions & Answers

Unable to create alias

I am using Solaris 9 machine. I am unable to create any aliases. I gave the following command: alias ls='ls -ltr' It did nt give any errors. But next time, I use ls, it is working simply as ls but not like ls -ltr. I am not having admin permissions. Is it the reason. (3 Replies)
Discussion started by: mumashankar
3 Replies

4. UNIX for Dummies Questions & Answers

Unable to create a bootable tape

Good morning, I have no unix training. My daily backup failed with the following error. ' Cannot create /tmp/tape.bootimage because it already exists. I am using smit to run a rootvg and SAPvg backup. What should I do? (1 Reply)
Discussion started by: ubyankees
1 Replies

5. HP-UX

Need help. Unable to create threads after a certain number

Hi, I have a process which creates pthreads to generate some reports. After creating the reports these threads return null. But after 1024 threads, the process is not able to create any threads further.,and at max 5 threads are existing simultaneously and are returning the control back after... (2 Replies)
Discussion started by: Krsh
2 Replies

6. Solaris

Unable to create folder as a user

Hi All, I am trying to create a folder in /export/home/user1 directory as a user1 but I am getting the error message as -bash-3.00$ mkdir abc mkdir: Failed to make directory "abc"; Permission denied Also I tried creating the folder but it fails too -bash-3.00$ touch abc touch: cannot... (2 Replies)
Discussion started by: Manjunath K V
2 Replies

7. Red Hat

unable to open / create any file in vi

Hi, I am unable to create/open any file in vi editor for normal user, though using root I am able to create/open any file, using redhat 5.5, example vi test it showing nothing after entering command (9 Replies)
Discussion started by: manoj.solaris
9 Replies

8. AIX

Unable to Create spot from mksysb

Hello All, Kindly need help in my problem i.e. I get this error when i create spot from mksysb. #0042-001 nim: processing error encountered on "master": 0042-001 m_mkspot: processing error encountered on "master": 0042-175 c_mkspot: An unexpected result was returned by the... (2 Replies)
Discussion started by: emerann
2 Replies

9. Forum Support Area for Unregistered Users & Account Problems

Unable to create new thread

Hi. I registered, but when trying to post, I get ... "Sorry, you do not have enough Bits to post a new thread" Google & Forum search showed some hits, but no solution. Please advide. Thanks! (1 Reply)
Discussion started by: gehe
1 Replies

10. Solaris

Unable to create a ftp user only

Hi all I am facing difficulties when using the useraddcommand. when running useradd -u 60006 -g 100 -d /opt/xxx/yyy/z -m -s /bin/false ftpuser It does create the user, but with a wrong home directory. It creates its home directory at /home/ftpuser Please can you help? (2 Replies)
Discussion started by: fretagi
2 Replies
Graphics::Primitive::Component(3pm)			User Contributed Perl Documentation		       Graphics::Primitive::Component(3pm)

NAME
Graphics::Primitive::Component - Base graphical unit DESCRIPTION
A Component is an entity with a graphical representation. SYNOPSIS
my $c = Graphics::Primitive::Component->new({ origin => Geometry::Primitive::Point->new({ x => $x, y => $y }), width => 500, height => 350 }); LIFECYCLE
prepare Most components do the majority of their setup in the prepare. The goal of prepare is to establish it's minimum height and width so that it can be properly positioned by a layout manager. $driver->prepare($comp); layout This is not a method of Component, but a phase introduced by the use of Layout::Manager. If the component is a container then each of it's child components (even the containers) will be positioned according to the minimum height and width determined during prepare. Different layout manager implementations have different rules, so consult the documentation for each for details. After this phase has completed the origin, height and width should be set for all components. $lm->do_layout($comp); finalize This final phase provides and opportunity for the component to do any final changes to it's internals before being passed to a driver for drawing. An example might be a component that draws a fleuron at it's extremities. Since the final height and width isn't known until this phase, it was impossible for it to position these internal components until now. It may even defer creation of this components until now. It is not ok to defer all action to the finalize phase. If you do not establish a minimum hieght and width during prepare then the layout manager may not provide you with enough space to draw. $driver->finalize($comp); draw Handled by Graphics::Primitive::Driver. $driver->draw($comp); METHODS
Constructor new Creates a new Component. Instance Methods background_color Set this component's background color. border Set this component's border, which should be an instance of Border. callback Optional callback that is fired at the beginning of the "finalize" phase. This allows you to add some sort of custom code that can modify the component just before it is rendered. The only argument is the component itself. Note that changing the position or the dimensions of the component will not re-layout the scene. You may have weird results of you manipulate the component's dimensions here. class Set/Get this component's class, which is an abitrary string. Graphics::Primitive has no internal use for this attribute but provides it for outside use. color Set this component's foreground color. fire_callback Method to execute this component's "callback". get_tree Get a tree for this component. Since components are -- by definiton -- leaf nodes, this tree will only have the one member at it's root. has_callback Predicate that tells if this component has a "callback". height Set this component's height. inside_bounding_box Returns a Rectangle that defines the edges of the 'inside' box for this component. This box is relative to the origin of the component. inside_height Get the height available in this container after taking away space for padding, margin and borders. inside_width Get the width available in this container after taking away space for padding, margin and borders. margins Set this component's margins, which should be an instance of Insets. Margins are the space outside the component's bounding box, as in CSS. The margins should be outside the border. maximum_height Set/Get this component's maximum height. Used to inform a layout manager. maximum_width Set/Get this component's maximum width. Used to inform a layout manager. minimum_height Set/Get this component's minimum height. Used to inform a layout manager. minimum_inside_height Get the minimum height available in this container after taking away space for padding, margin and borders. minimum_inside_width Get the minimum width available in this container after taking away space for padding, margin and borders. minimum_width Set/Get this component's minimum width. Used to inform a layout manager. name Set this component's name. This is not required, but may inform consumers of a component. Pay attention to that library's documentation. origin Set/Get the origin point for this component. outside_height Get the height consumed by padding, margin and borders. outside_width Get the width consumed by padding, margin and borders. finalize Method provided to give component one last opportunity to put it's contents into the provided space. Called after prepare. padding Set this component's padding, which should be an instance of Insets. Padding is the space inside the component's bounding box, as in CSS. This padding should be between the border and the component's content. page If true then this component represents stand-alone page. This informs the driver that this component (and any children) are to be renderered on a single surface. This only really makes sense in formats that have pages such as PDF of PostScript. prepare Method to prepare this component for drawing. This is an empty sub and is meant to be overridden by a specific implementation. preferred_height Set/Get this component's preferred height. Used to inform a layout manager. preferred_width Set/Get this component's preferred width. Used to inform a layout manager. to_string Get a string representation of this component in the form of: $name $x,$y ($widthx$height) visible Set/Get this component's visible flag. width Set/Get this component's width. AUTHOR
Cory Watson, "<gphat@cpan.org>" BUGS
Please report any bugs or feature requests to "bug-geometry-primitive at rt.cpan.org", or through the web interface at http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Geometry-Primitive <http://rt.cpan.org/NoAuth/ReportBug.html?Queue=Geometry-Primitive>. I will be notified, and then you'll automatically be notified of progress on your bug as I make changes. COPYRIGHT &; LICENSE Copyright 2008-2009 by Cory G Watson. This program is free software; you can redistribute it and/or modify it under the same terms as Perl itself. perl v5.12.3 2011-06-02 Graphics::Primitive::Component(3pm)
All times are GMT -4. The time now is 01:04 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy