I think my serial port(on board) is not working ......
because when I am running same code on two machines its working good....but when my system comes into picture ....it doesnt show any output comming from serial port..........
can anybody tell me how to configure my serial port.........or to... (16 Replies)
Hi,
I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output--
According to this,serial port is not found.can anyone please tell me how to configure the... (1 Reply)
I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows:
SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK);
write (SerialPort_Send, pCommandString, strlen (pCommandString));
... (2 Replies)
Hi,
How can i configure my modem in AIX thru serial port (sa0-->tty0)
I have two port serial card configured as sa0
I created tty1 which port is tty0 and which port is tty1 how can i know?? (1 Reply)
A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing:
# dmesg | grep tty
console enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
... (2 Replies)
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
hello all,
please any one can provide me the shell script to write data to /dev/ttyS1
and read responce from /dev/ttyS1 and compare the responce to some string ..
thnxx
---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ----------
any body help me..
how do i... (1 Reply)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT LINUX
dpkg-preconfigure
DPKG-PRECONFIGURE(8) Debconf DPKG-PRECONFIGURE(8)NAME
dpkg-preconfigure - let packages ask questions prior to their installation
SYNOPSIS
dpkg-preconfigure [options] package.deb
dpkg-preconfigure --apt
DESCRIPTION
dpkg-preconfigure lets packages ask questions before they are installed. It operates on a set of debian packages, and all packages that
use debconf will have their config script run so they can examine the system and ask questions.
OPTIONS -ftype, --frontend=type
Select the frontend to use.
-pvalue, --priority=value
Set the lowest priority of questions you are interested in. Any questions with a priority below the selected priority will be ignored
and their default answers will be used.
--terse
Enables terse output mode. This affects only some frontends.
--apt
Run in apt mode. It will expect to read a set of package filenames from stdin, rather than getting them as parameters. Typically this
is used to make apt run dpkg-preconfigure on all packages before they are installed. To do this, add something like this to
/etc/apt/apt.conf:
// Pre-configure all packages before
// they are installed.
DPkg::Pre-Install-Pkgs {
"dpkg-preconfigure --apt --priority=low";
};
-h, --help
Display usage help.
SEE ALSO debconf(7)AUTHOR
Joey Hess <joeyh@debian.org>
2011-06-22 DPKG-PRECONFIGURE(8)