Sponsored Content
Full Discussion: Writing to a Serial Port
Top Forums Web Development Writing to a Serial Port Post 302921767 by Meow613 on Monday 20th of October 2014 11:14:00 PM
Old 10-21-2014
From the terminal -

Code:
root@meow:/etc/apt# exec 3<>/dev/ttyS0
root@meow:/etc/apt# printf '\rW\n' >&3
root@meow:/etc/apt# cat <&3  NO OUTPUT

Minicom -

Code:
?�
   ?�
      ?�
         ?�
            ?�
               ?�

---------- Post updated at 08:34 AM ---------- Previous update was at 08:27 AM ----------

Thanks neutronscott

From the root terminal
Code:
root@meow:/home/ethan#  exec 3<>/dev/ttyS0
root@meow:/home/ethan#  printf '\rW\n' >&3
root@meow:/home/ethan#  cat <&3

?�

---------- Post updated at 11:14 PM ---------- Previous update was at 08:34 AM ----------

I don't have the loopback plug yet. ETA 28 Oct.
 

10 More Discussions You Might Find Interesting

1. Linux

urgent......Serial port

I think my serial port(on board) is not working ...... because when I am running same code on two machines its working good....but when my system comes into picture ....it doesnt show any output comming from serial port.......... can anybody tell me how to configure my serial port.........or to... (16 Replies)
Discussion started by: arunchaudhary19
16 Replies

2. Solaris

Serial port not found

Hi, I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output-- According to this,serial port is not found.can anyone please tell me how to configure the... (1 Reply)
Discussion started by: smartgupta
1 Replies

3. Programming

How to tell if a string to serial port has been sent

I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows: SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK); write (SerialPort_Send, pCommandString, strlen (pCommandString)); ... (2 Replies)
Discussion started by: ExDes
2 Replies

4. AIX

Serial port in AIX

Hi, How can i configure my modem in AIX thru serial port (sa0-->tty0) I have two port serial card configured as sa0 I created tty1 which port is tty0 and which port is tty1 how can i know?? (1 Reply)
Discussion started by: pchangba
1 Replies

5. UNIX for Dummies Questions & Answers

Missing serial port

A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing: # dmesg | grep tty console enabled serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ... (2 Replies)
Discussion started by: dotancohen
2 Replies

6. Shell Programming and Scripting

Need help with serial port

Hi, I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Discussion started by: charlie.arya
0 Replies

7. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies

8. Shell Programming and Scripting

reading from and writing to serial port

hello all, please any one can provide me the shell script to write data to /dev/ttyS1 and read responce from /dev/ttyS1 and compare the responce to some string .. thnxx ---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ---------- any body help me.. how do i... (1 Reply)
Discussion started by: yashwantkumar
1 Replies

9. Web Development

Setup Serial Port

I need to set a serial port to 9600 7E1. How do I accomplish this? I've tried every combination, with no luck. (6 Replies)
Discussion started by: Meow613
6 Replies

10. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
APT-CUDF-GET(8) 						    DOSE Tools							   APT-CUDF-GET(8)

NAME
apt-cudf-get - wrapper for calling apt-get with external solvers SYNOPSIS
apt-cudf-get [arguments] DESCRIPTION
apt-cudf-get is a wrapper that allows to invoke apt-get with external solvers while ignoring apt's pinning. All options are passed on to apt-get. Normally, apt uses so-called pinning to select a candidate version of a package in case there are several versions available. This also holds when calling apt-get with external solvers. However, when it is not possible to find a solution under this constraint, it may be useful to relax pinning and to allow the external solver to choose among all available versions of packages in order to satisfy dependencies, not only those that are selected by the pinning. This is precisely what apt-cudf-get does. Note that, when using an external solver, the proposed solution may contain any available version of the packages that are given as arguments to install on the command line without specifying a version qualifier. For example apt-cudf-get --solver aspcud install ocaml may propose to install any available version of ocaml, while apt-cudf-get --solver aspcud install ocaml=4.01.0 will only propose to install ocaml in version 4.01.0 AUTHOR
Pietro Abate and Roberto Di Cosmo BUGS
Not all types of arguements to apt are correctly treated by this wrapper, in particular not the +pkg and -pkg shorthands for installation and removal requests. SEE ALSO
apt-get(8), apt-cudf(1), apt-cudf.conf(5), update-cudf-solvers(8), README.cudf-solvers <file:///usr/share/doc/apt-cudf/README.cudf-solvers>, README.Debian <file:///usr/share/doc/apt-cudf/README.Debian> dose3 3.0.2 2012-06-25 APT-CUDF-GET(8)
All times are GMT -4. The time now is 04:11 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy