I think my serial port(on board) is not working ......
because when I am running same code on two machines its working good....but when my system comes into picture ....it doesnt show any output comming from serial port..........
can anybody tell me how to configure my serial port.........or to... (16 Replies)
Hi,
I am working with solaris 9,SUN-Blade-100 and I want to communicate with the Serial port.To check whether the port is working or not.I write code and when I execute the file,then I got the output--
According to this,serial port is not found.can anyone please tell me how to configure the... (1 Reply)
I have a need to determine when a string has been completely sent via a serial port from a standard 'C' application. The code is as follows:
SerialPort_Send = open (pPortString, O_WRONLY | O_NOCTTY | O_NONBLOCK);
write (SerialPort_Send, pCommandString, strlen (pCommandString));
... (2 Replies)
Hi,
How can i configure my modem in AIX thru serial port (sa0-->tty0)
I have two port serial card configured as sa0
I created tty1 which port is tty0 and which port is tty1 how can i know?? (1 Reply)
A neighbour's Ubuntu 10.04 machine has five serial ports, one on the motherboard and four on a PCI card. However, only four cards are showing:
# dmesg | grep tty
console enabled
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
... (2 Replies)
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
hello all,
please any one can provide me the shell script to write data to /dev/ttyS1
and read responce from /dev/ttyS1 and compare the responce to some string ..
thnxx
---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ----------
any body help me..
how do i... (1 Reply)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT MOJAVE
curlopt_stream_weight
CURLOPT_STREAM_WEIGHT(3) curl_easy_setopt options CURLOPT_STREAM_WEIGHT(3)NAME
CURLOPT_STREAM_WEIGHT - set numerical stream weight
SYNOPSIS
#include <curl/curl.h>
CURLcode curl_easy_setopt(CURL *handle, CURLOPT_STREAM_WEIGHT, long weight);
DESCRIPTION
Set the long weight to a number between 1 and 256.
When using HTTP/2, this option sets the individual weight for this particular stream used by the easy handle. Setting and using weights
only makes sense and is only usable when doing multiple streams over the same connections, which thus implies that you use CURLMOPT_PIPE-
LINING(3).
This option can be set during transfer and will then cause the updated weight info get sent to the server the next time a HTTP/2 frame is
sent to the server.
See section 5.3 of RFC 7540 for protocol details: https://httpwg.github.io/specs/rfc7540.html#StreamPriority
Streams with the same parent should be allocated resources proportionally based on their weight. So if you have two streams going, stream A
with weight 16 and stream B with weight 32, stream B will get two thirds (32/48) of the available bandwidth (assuming the server can send
off the data equally for both streams).
DEFAULT
If nothing is set, the HTTP/2 protocol itself will use its own default which is 16.
PROTOCOLS
HTTP/2
EXAMPLE
TODO
AVAILABILITY
Added in 7.46.0
RETURN VALUE
Returns CURLE_OK if the option is supported, and CURLE_UNKNOWN_OPTION if not.
SEE ALSO CURLOPT_STREAM_DEPENDS(3), CURLOPT_STREAM_DEPENDS_E(3), CURLOPT_PIPEWAIT(3), CURLMOPT_PIPELINING(3),
libcurl 7.54.0 February 03, 2016 CURLOPT_STREAM_WEIGHT(3)