Network routing Post: 302921548

9 More Discussions You Might Find Interesting

1. IP Networking

Routing Network Traffic With Mandrake

I am running Mandrake 8.0 (KDE ver 2.1.1) on a machine with 2 NICs. This is a college project. I am attempting to configure this machine as a firewall, and to pass packets from one network to another. Eth0 is on my external network. Eth1 is on my internal network. I set the gateway in "netconf"...

2. UNIX for Dummies Questions & Answers

Need help to configure routing on home network

I have a Windows laptop and a Sparc desktop. I'm trying to toy around with routing. If have always on broadband from BT. My router ipaddress is: 192.168.1.1 This router uses DHCP. My Laptop Ip is as follows: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . :...

3. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no...

4. Solaris

Network cards - Routing

Hi all I hate networking, I hate everything to do with it. Its something I do in anger in one contract, then forget. This is more of a question / than a problem. So, on a solaris 10 server, using older qfe cards, Ive got a sun truck with 4 nics (qfe0,3,4,7), and a ipmp pair (hemo0,qfe1)....

5. IP Networking

Routing traffic problem between 3G and Office Lan Network

Hi, I would like to ask some networking solution regarding my work LAN and 3G usb network problem. I want to route my internet traffic to the 3G network and sometimes connect to some of my work network for ssh to configure some workstation or print something. Currently my problem is i can't...

6. IP Networking

Test network routing algourithm

hi, I've wrote my own network routing algorithm in java, now i wanna test it and see if it works correctly, also i wanna test it's performance in comparison with other network routing algorithms like RIP. can anyone tell me how can i do this? is there any simulator or something for network routing...

7. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a...

8. IP Networking

Test Network Routing Issues (FREEBSD and RHEL)

Hello, I'm attempting to setup a test network with a client-server based architecture using a proprietary application. The client works by communicating with the server on separate links (typically cellular connections) and then initiates a tunnel over each active link. However, in place of the...

9. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and...

LEARN ABOUT OSF1

ip6_setup

ip6_setup(8)						      System Manager's Manual						      ip6_setup(8)

NAME

       ip6_setup - IPv6 configuration program

SYNOPSIS

       /usr/sbin/ip6_setup

DESCRIPTION

       The ip6_setup utility allows you to configure the IPv6 networking software on your system.

       To run ip6_setup, enter the following command and then answer the questions: # ip6_setup

       You  must know your Internet Protocol Version 6 (IPv6) address. If your network uses subnet routing, you must know the subnet mask for your
       network.  The network manager should be able to provide you with the information that you need.

       After the ip6_setup command completes, the network services on the  system  can	be  restarted  manually  with  the  following  command:  #
       /usr/sbin/rcinet restart

       Before  you  restart  the  network  services  with  the preceding command, warn the users that the network services on the system are being
       removed.  File systems that were not mounted using the /etc/fstab file or the automount command must be unmounted with the unmount command.
       You must remount these file systems using the mount command after the network is started on your system.

       Alternatively, you can reboot the system with the following command: # /usr/sbin/shutdown -r now

FILES

       Specifies  the  host  name  file.  Specifies the environment variables that define the network configuration on your system.  Specifies the
       trusted hosts file.  Specifies the network name file.  Specifies Internet routing information.  Specifies Internet routing information.

SEE ALSO

       Commands: mount(8), rcinet(8)

       Files: gateways(4), hosts(4), hosts.equiv(4), networks(4), routes(4).

       Network Administration

																      ip6_setup(8)