Hello
We have a power supply in an x4100 (x86) and it seems to be faulty but it is still working!?! (this box only has one PSU). We are getting Orange flashing warning light on the front of the box and the LED labelled “rear PSu” is solid orange ...We don't seem to have had any syslog error... (8 Replies)
Hi All,
I replace a sub-mirror of a mirrored volume by using below command:
#metadetach d10(mirror) d11(striped)
#metattach d10 d13(other striped)
With above process I successfully replaced a faulty volume. I want to knoow if the process I followed is right. Or if not, what... (5 Replies)
Hi everyone,
I wanted to ask a question about fmadm and explorer outputs.
Recently found out that an error shows up in fmadm saying "mb is faulty but still in service" so we took an explorer send to Oracle Support. Error led wasn't on but we didn't want to risk the probability.
They came up... (1 Reply)
Hi,
Recently i came across a disk that seems to be faulty and need help. I have gathered some information by running below commands and any help on how to solve this will be great.
# uname –a
SunOS XYZ 5.7 Generic_106541-16 sun4u sparc SUNW,Ultra-4
#df -k
Filesystem kbytes used... (3 Replies)
Requirement to remove a faulty mirrored disk from hp-ux LVM
<root@pdwp1s>/etc # vgdisplay -v /dev/vg00
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c2t0d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't... (9 Replies)
Hi,
Have mirrored the primary disk to 3 .
Server and OS:
# uname -a
HP-UX pdwp1s B.11.11 U 9000/800 118434630 unlimited-user license
# model
9000/800/L3000-7x
# strings /etc/lvmtab
/dev/vg00
+F@<
/dev/dsk/c1t2d0
/dev/dsk/c2t2d0
/dev/dsk/c2t0d0
But now I have only 1 disk... (5 Replies)
Hello,
I'm new to this forum and as you will see from my question I'm new to UNIX as well.
One of our costumers has HP rx4640 running on UNIX with two 300GB hot-swappable disks that are mirrored. They reported to us that one of the disks is faulty and they want us to take care of it. Below is... (16 Replies)
I have number in file which contains date and serial number:
2013101000.
The last two digits are serial number (00). So maximum of serial number is 100.
After reaching 100 it becomes 00 with incrementing 10 which is day with max 31.
after reaching 31 it becomes 00 and increments 10... (31 Replies)
I plugged both power cables in both power supply. When I unplugged each power cable one by one, the SPARC T4-1 machine keep running. However, show faulty command shows below message. (I have also attached the picture of both power supply)
-> show faulty
Target ... (1 Reply)
Discussion started by: z_haseeb
1 Replies
LEARN ABOUT FREEBSD
pcic
PCIC(4) BSD Kernel Interfaces Manual PCIC(4)NAME
pcic -- PC Card bridge driver
SYNOPSIS
device pcic
device pccard
DESCRIPTION
The pcic driver provides support for older ISA and non-Yenta PCI PC Card bridges. The pcic driver supports most ExCA devices attached to the
ISA bus or PCI devices that do not conform to the Yenta specification.
The following ISA devices, or true clones, are supported in the current code.
Intel i82365SL Step A
Intel i82365SL Step B
Intel i82365SL Step C Intel's original 16-bit PC Card controller.
Intel i82365SL-DF Intel's last version of this device. 3.3V support was added.
VLSI 82C146 An older VLSI part with some issues on some machines.
Cirrus Logic PD-6710
Cirrus Logic PD-6720
Cirrus Logic PD-6722 Cirrus Logic's pcic controller. Compatible with the i82365SL Step C with the addition of a different 3.3V control.
Ricoh RF5C296
Ricoh RF5C396 Ricoh's PC Card bridge chips. These are compatible with the i82365SL Step C, but with yet another different 3.3V con-
trol.
Vadem 365
Vadem 465 Compatible with i82365SL Step C.
Vadem 468
Vadem 469 Like the earlier Vadem models, but with Vadem's own, incompatible, 3.3V control system.
IBM PCIC IBM clone of the original i82365SL part, with its own ID register value. Has no 3.3V ability.
Many other vendors made parts in this arena, but most of them were compatible with one of the above chipsets.
The following PCI pcmcia bridges are supported:
Cirrus Logic PD6729
Cirrus Logic PD6730
O2micro OZ6729
O2micro OZ6730
BUGS
This does not work at all at the moment.
BSD July 9, 2002 BSD