10-14-2014
How to re-route traffic from one port to another?
Hi Friends,
How to do port forwarding in AIX? We would like to re route traffic from port A to port B on AIX LPAR.
for example: my application is using 8080 port on LPAR and would like to use the 8081 instead of 8080. By default application was configured with 8080. But instead of changing in application (several ) config files. We would like to forward traffic from 8080 to 8081. I understand that, it can be done by network engineer at their end as well. But we would like to implement it on AIX side.
Please let me know, how this can be done on AIX LPAR.
Thank you
Last edited by System Admin 77; 10-14-2014 at 05:40 PM..
9 More Discussions You Might Find Interesting
1. IP Networking
I have a Linux box with 3 ethernet cards:
- eth0 - connected to internet (dhcp)
- eth1 - 192.168.0.1 connected to embedded device1
- eth2 - 192.168.0.1 also connected to embedded device2
(both eth1/eth2 have to be in identical, though separate, private networks).
Also, on eth0 I have two... (1 Reply)
Discussion started by: kontozebyoszuka
1 Replies
2. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
3. IP Networking
I am trying to block ALL traffic except when from ports 9100,22,23 to destination network 192.0.0.0 (my WAN): 2 networks 192.0.3.0 with static route to 192.0.0.0
Shouldn't this work?:
iptables -A INPUT -p tcp -d 192.0.0.0/24 --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -d 192.0.0.0/24... (3 Replies)
Discussion started by: herot
3 Replies
4. IP Networking
How can I trace a route from one server to a certain port on another server? (3 Replies)
Discussion started by: sewood
3 Replies
5. Infrastructure Monitoring
If I would like to know what connection , data , traffic in a network port ( eth0 ) , what can I do ?
ps. because I always found the network is very slow , so I would like what the network port is doing .
Thanks
Login ID ust3 is currently in read-only mode for multiple infractions. Creating... (0 Replies)
Discussion started by: ust03
0 Replies
6. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
7. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
8. Shell Programming and Scripting
Below is what i did to open the firewall port on
# sudo firewall-cmd --zone=public --add-port=27012/tcp --permanent
Warning: ALREADY_ENABLED: 27012:tcp
success
# sudo firewall-cmd --reload
success
# firewall-cmd --list-all
public
target: default
icmp-block-inversion: no
... (10 Replies)
Discussion started by: mohtashims
10 Replies
9. UNIX for Beginners Questions & Answers
hi,
i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010).
the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file.
my code is:
... (2 Replies)
Discussion started by: yossi
2 Replies
LEARN ABOUT DEBIAN
tmserver
tmserver(1) Translate Toolkit 1.3.0 tmserver(1)
NAME
tmserver - a Translation Memory server,
SYNOPSIS
tmserver --bind=HOSTNAME --port=PORT [--tmdb=TMDBFILE] [--import-translation-file=TMFILE [--import-source-lang=SOURCE_LANG] [--import-tar-
get-lang=TARGET_LANG]]
Where TMDBFILE is the sqlite database file containing tmdb translation memory data, if not specified a new temporary database is created,
and TMFILE is a translation file (po, xliff, etc.) that should be imported into the database (mostly useful when no tmdb file is speci-
fied).
DESCRIPTION
tmserver is a Translation Memory service that can be queried via HTTP using a simple REST like URL/http and data is exchanged between
server and client encoded in JSON.
OPTIONS
-h, --help
show this help message and exit
-d TMDBFILE, --tmdb=TMDBFILE
translation memory database
-f TMFILES, --import-translation-file=TMFILE
translation file to import into the database
-t TARGET_LANG, --import-target-lang=TARGET_LANG
target language of translation files
-s SOURCE_LANG, --import-source-lang=SOURCE_LANG
source language of translation files
-b BIND, --bind=HOSTNAME
address to bind server to
-p PORT, --port=PORT
port to listen on
EXAMPLE
The easiest way to run the server for testing is to pass it a large translation file (maybe generated by pocompendium) to create a tmdb
database on the fly.
tmserver -b localhost -p 8080 -f compendium.po -s en_US -t ar
The server can be queried using a webbrowser. The url would be http://HOST:PORT/tmserver/SOURCE_LANG/TARGET_LANG/unit/STRING
So to see suggestions for "open file" try the url http://localhost:8080/tmserver/en_US/ar/unit/open+file
Translate Toolkit 1.3.0 tmserver(1)