10-14-2014
How to re-route traffic from one port to another?
Hi Friends,
How to do port forwarding in AIX? We would like to re route traffic from port A to port B on AIX LPAR.
for example: my application is using 8080 port on LPAR and would like to use the 8081 instead of 8080. By default application was configured with 8080. But instead of changing in application (several ) config files. We would like to forward traffic from 8080 to 8081. I understand that, it can be done by network engineer at their end as well. But we would like to implement it on AIX side.
Please let me know, how this can be done on AIX LPAR.
Thank you
Last edited by System Admin 77; 10-14-2014 at 05:40 PM..
9 More Discussions You Might Find Interesting
1. IP Networking
I have a Linux box with 3 ethernet cards:
- eth0 - connected to internet (dhcp)
- eth1 - 192.168.0.1 connected to embedded device1
- eth2 - 192.168.0.1 also connected to embedded device2
(both eth1/eth2 have to be in identical, though separate, private networks).
Also, on eth0 I have two... (1 Reply)
Discussion started by: kontozebyoszuka
1 Replies
2. Solaris
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
Discussion started by: bobby320
3 Replies
3. IP Networking
I am trying to block ALL traffic except when from ports 9100,22,23 to destination network 192.0.0.0 (my WAN): 2 networks 192.0.3.0 with static route to 192.0.0.0
Shouldn't this work?:
iptables -A INPUT -p tcp -d 192.0.0.0/24 --dport 22 -j ACCEPT
iptables -A INPUT -p tcp -d 192.0.0.0/24... (3 Replies)
Discussion started by: herot
3 Replies
4. IP Networking
How can I trace a route from one server to a certain port on another server? (3 Replies)
Discussion started by: sewood
3 Replies
5. Infrastructure Monitoring
If I would like to know what connection , data , traffic in a network port ( eth0 ) , what can I do ?
ps. because I always found the network is very slow , so I would like what the network port is doing .
Thanks
Login ID ust3 is currently in read-only mode for multiple infractions. Creating... (0 Replies)
Discussion started by: ust03
0 Replies
6. Solaris
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
7. Solaris
please find the below o/p for your reference
bash-3.00# fcinfo hba-port
HBA Port WWN: 21000024ff295a34
OS Device Name: /dev/cfg/c2
Manufacturer: QLogic Corp.
Model: 375-3356-02
Firmware Version: 05.03.02
FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;... (3 Replies)
Discussion started by: sb200
3 Replies
8. Shell Programming and Scripting
Below is what i did to open the firewall port on
# sudo firewall-cmd --zone=public --add-port=27012/tcp --permanent
Warning: ALREADY_ENABLED: 27012:tcp
success
# sudo firewall-cmd --reload
success
# firewall-cmd --list-all
public
target: default
icmp-block-inversion: no
... (10 Replies)
Discussion started by: mohtashims
10 Replies
9. UNIX for Beginners Questions & Answers
hi,
i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010).
the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file.
my code is:
... (2 Replies)
Discussion started by: yossi
2 Replies
LEARN ABOUT NETBSD
xvgrabport
XvGrabPort(3) libXv Functions XvGrabPort(3)
NAME
XvGrabPort - lock port for exclusive use by client
SYNOPSIS
#include <X11/extensions/Xvlib.h>
int XvGrabPort(Display *dpy, XvPortID port, Time time);
ARGUMENTS
dpy Specifies the connection to the X server.
port Defines the port to be grabbed.
time Specifies the request timestamp.
DESCRIPTION
XvGrabPort(3) grabs a port. Once a client grabs a port, only that client can make video requests to that port.
If the time is before the current port time, the XvGrabPort request is ignored and XvInvalidTime is returned. If the port is already
grabbed by another client, XvAlreadyGrabbed is returned. Otherwise it returns a status of Success. The port time is updated when the fol-
lowing requests are processed: XvGrabPort(3), XvUngrabPort(3), XvPutVideo(3), XvPutStill(3), XvGetVideo(3), XvGetStill(3).
If the port is actively processing video for another client, the video is preempted, and an XvVideoNotify event with detail XvPreempted is
generated for its drawable.
RETURN VALUES
[Success]
Returned if XvGrabPort(3) completed successfully.
[XvInvalidTime]
Returned if requested time is older than the current port time.
[XvAlreadyGrabbed]
Returned if the port is already grabbed by another client.
[XvBadExtension]
Returned if the Xv extension is unavailable.
[XvBadAlloc]
Returned if XvGrabPort(3) failed to allocate memory to process the request.
DIAGNOSTICS
[XvBadPort] Generated if the requested port does not exist.
SEE ALSO
XvUngrabPort(3), XvVideoNotify(3)
X Version 11 libXv 1.0.7 XvGrabPort(3)