Network routing Post: 302920818

9 More Discussions You Might Find Interesting

1. IP Networking

Routing Network Traffic With Mandrake

I am running Mandrake 8.0 (KDE ver 2.1.1) on a machine with 2 NICs. This is a college project. I am attempting to configure this machine as a firewall, and to pass packets from one network to another. Eth0 is on my external network. Eth1 is on my internal network. I set the gateway in "netconf"...

2. UNIX for Dummies Questions & Answers

Need help to configure routing on home network

I have a Windows laptop and a Sparc desktop. I'm trying to toy around with routing. If have always on broadband from BT. My router ipaddress is: 192.168.1.1 This router uses DHCP. My Laptop Ip is as follows: Ethernet adapter Local Area Connection: Connection-specific DNS Suffix . :...

3. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no...

4. Solaris

Network cards - Routing

Hi all I hate networking, I hate everything to do with it. Its something I do in anger in one contract, then forget. This is more of a question / than a problem. So, on a solaris 10 server, using older qfe cards, Ive got a sun truck with 4 nics (qfe0,3,4,7), and a ipmp pair (hemo0,qfe1)....

5. IP Networking

Routing traffic problem between 3G and Office Lan Network

Hi, I would like to ask some networking solution regarding my work LAN and 3G usb network problem. I want to route my internet traffic to the 3G network and sometimes connect to some of my work network for ssh to configure some workstation or print something. Currently my problem is i can't...

6. IP Networking

Test network routing algourithm

hi, I've wrote my own network routing algorithm in java, now i wanna test it and see if it works correctly, also i wanna test it's performance in comparison with other network routing algorithms like RIP. can anyone tell me how can i do this? is there any simulator or something for network routing...

7. Solaris

No network cable But Network interface is UP and Running

I've one Netra 240 After changing main board and system configuration card reader, Network is not accessible any more, Network interfaces are always UP and Running even when there is no cable connected to Network interfaces. I tried to restart and plumb/unplumb with no luck. ifconfig -a...

8. IP Networking

Test Network Routing Issues (FREEBSD and RHEL)

Hello, I'm attempting to setup a test network with a client-server based architecture using a proprietary application. The client works by communicating with the server on separate links (typically cellular connections) and then initiates a tunnel over each active link. However, in place of the...

9. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and...

LEARN ABOUT NETBSD

ipsend

IPSEND(1)						      General Commands Manual							 IPSEND(1)

NAME

       ipsend - sends IP packets

SYNOPSIS

       ipsend  [  -dITUv ] [ -i <interface> ] [ -f <offset> ] [ -g <gateway> ] [ -m <MTU> ] [ -o <option> ] [ -P <protocol> ] [ -s <source> ] [ -t
       <dest. port> ] [ -w <window> ] <destination> [TCP-flags]

DESCRIPTION

       ipsend can be compiled in two ways.  The first is used to send one-off packets to a destination host, using command line options to specify
       various	attributes  present  in the headers.  The destination must be given as the last command line option, except for when TCP flags are
       specified as a combination of A, S, F, U, P and R, last.

       The other way it may be compiled, with DOSOCKET defined, is to allow an attempt at making a TCP connection using a  with  ipsend  resending
       the SYN packet as per the command line options.

OPTIONS

       -d     enable debugging mode.

       -f <offset>
	      The  -f  allows the IP offset field in the IP header to be set to an arbitrary value, which can be specified in decimal or hexadeci-
	      mal.

       -g <gateway>
	      Specify the hostname of the gateway through which to route packets.  This is required whenever the destination host  isn't  directly
	      attached to the same network as the host from which you're sending.

       -i <interface>
	      Set the interface name to be the name supplied.

       -m <MTU>
	      Specify  the  MTU to be used when sending out packets.  This option allows you to set a fake MTU, allowing the simulation of network
	      interfaces with small MTU's without setting them so.

       -o <option>
	      Specify options to be included at the end of the IP header.  An EOL option is automatically appended and need not be given.   If	an
	      option would also have data associated with it (source as an IP# for a lsrr option), then this will not be initialised.

       -s <source>
	      Set the source address in the packet to that provided - maybe either a hostname or IP#.

       -t <dest.port>
	      Set the destination port for TCP/UDP packets.

       -w <window>
	      Set the window size for TCP packets.

       -I     Set the protocol to ICMP.

       -P <protocol>
	      Set the protocol to the value given.  If the parameter is a name, the name is looked up in the /etc/protocols file.

       -T     Set the protocol to TCP.

       -U     Set the protocol to UDP.

       -v     enable verbose mode.

SEE ALSO

       ipresend(1), iptest(1), bpf(4), protocols(5), ipsend(5)

DIAGNOSTICS

       Needs to be run as root.

BUGS

       If you find any, please send email to me at darrenr@pobox.com

																	 IPSEND(1)