If the value being read from the serial port is 0, (zero), then the cursor will not move.
Until the value changes from 33 to 126 you will not see anything printed but the cursor __might__ move by one space.
What is connected to the serial port, /dev/ttyS0?
Does it allow raw transfer? (e.g. Arduino.)
If nothing is connected then obtain a loopback plug as a test piece and plug it into the port.
Once set up and with a loopback plug connected use this untested line:-
Hi every body, i have the following problem :
I need to read incoming data from a serial port, this port has connected a weigth device to it that send the weigth and i need to read this data to my aplication, i had this problem in Window Enviroment and i resolve with a "C" routine, but in Unix... (1 Reply)
Hai there,
Can any one provide me with a ansi c source code for
opening com1 or com2 and read data. The port is connected to
another serial communication device on rs232 port.
The o/s is Sco Unix 5.0.6
Matter urgent
Viswanath (0 Replies)
dear sir,
pls. can you help me ? , my os is unix sco 5.0.4 and ,server dat derive (1,4gb)
not working, now i want to transfer my server data in other machine (unix/other possible) by serial port/other port comminication.
thanks
pankaj raval (2 Replies)
Hi,
I have a external board connected to my serial port. I need to execute "shutdown -r now" command when system boot up. When system boots up it requires a username ans password. Then I need to run my command. I can use rc script but that is rebooting system before it asks for username and... (0 Replies)
Hi Everyone,
In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected... (3 Replies)
hello all,
please any one can provide me the shell script to write data to /dev/ttyS1
and read responce from /dev/ttyS1 and compare the responce to some string ..
thnxx
---------- Post updated at 03:35 PM ---------- Previous update was at 11:46 AM ----------
any body help me..
how do i... (1 Reply)
hi, I've a problem on my C/C++ program with Posix Library.
I have to read data from the serial but I have incorrect data, in fact I get a bunch of zeros:
"2953.3174, 2785.2126, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0 , 0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0, 0.0 ,... (24 Replies)
Hello,
I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build.
The first part is what confuses me -the cabling.
I am coming from a Windows machine (w/appropriate... (5 Replies)
Discussion started by: joboy
5 Replies
LEARN ABOUT DEBIAN
blt_treenodeid
Blt_TreeNodeId(3) BLT Library Procedures Blt_TreeNodeId(3)__________________________________________________________________________________________________________________________________________________NAME
Blt_TreeNodeId - Returns the node serial number.
SYNOPSIS
#include <bltTree.h>
unsigned int
Blt_TreeNodeId(node)
ARGUMENTS
Blt_TreeNode node (in) Node whose ID is to be returned.
_________________________________________________________________DESCRIPTION
This procedure returns the node serial number. The node serial number is useful for programs that export the tree data object to the Tcl
programming level. Since node labels (and therefore pathnames) are not unique, the ID can be used to uniquely identify a node.
The arguments are as follows:
node The node whose serial number is returned. The serial number of the root node for example is always 0.
RETURNS
The serial number of the node. Nodes are given a unique serial number when they are created. You can use the ID to later retrieve the
node using Blt_TreeGetNode.
EXAMPLE
The following example prints the ID of a node.
printf("root ID is %s
", Blt_TreeNodeId(node));
KEYWORDS
Tcl_TreeCreateNode, Tcl_TreeDeleteNode
BLT 2.4 Blt_TreeNodeId(3)