Sponsored Content
Full Discussion: Cooler GPU
Special Forums Hardware Cooler GPU Post 302915221 by figaro on Monday 1st of September 2014 04:16:54 PM
Old 09-01-2014
Cooler GPU

In one of our computers a Zotac GPU was installed (Zotac GeForce GTX 780 3GB AMP! to be exact) and the processor remained an Intel Core i7 2600. For the processor a new after-market cooler was installed and for the GPU also, together with fans on all case grids.
Initially the temperatures as measured on the CPU were around 70C to 75C. However, after performing a software upgrade on the install stack, temperatures suddenly dropped to 40C to 45C, with no noticeable drop in performance. No other changes were made, the machine is connected as it was before, in the same location etc.

What could have caused the drop in operating temperatures?
 

6 More Discussions You Might Find Interesting

1. Solaris

Tracing the GPU usage

Hello, Can give me some tips to trace the GPU usage on a solaris8 update7 box? I try to understand why a Cadcam app is so slow on my Solaris box compared to a win$ box. I guess it comes from the poor graphic card I have but i would like to emphasize it. My bench is 150sec long on a Solaris... (0 Replies)
Discussion started by: solea
0 Replies

2. UNIX for Advanced & Expert Users

GPU and CUDA

Hi , i want begin programming using CUDA which enviroment can i get .I don't have desktop to buy GPU graphics card. what should to do to get CUDA enviroment. i'm thinking to buy desktop has this card or laptop (1 Reply)
Discussion started by: Scotch
1 Replies

3. Hardware

External GPU issue

Dear all, I set up a external Gforce GPU using the PE4H (Pcie passive adapter) from HWTOOLS.NET. I'm able to add and remove the device doing and The point is the kernel does not initialized the device correctly. Here is what dmesg gives after the scan: lspci -t gives and lspci... (2 Replies)
Discussion started by: aihake
2 Replies

4. Hardware

CUDA GPU terminates process at random instances

I am trying to start troubleshooting an error on a virtual server that uses the ubuntu 14.04 OS. Basically what happens (seeming random) is that the GPU stops processing and terminates. What Imean by seeming random is that for 3 runs there is no error then on run 4 the error appears. It has... (2 Replies)
Discussion started by: cmccabe
2 Replies

5. Hardware

How disabling GPU?

Hi All I'm find out a way to disable the DGD: AMD Radeon HD 7470M on my Ubutu 16.04.2 LTS because radeon open source module is not capable to support this GPU and consequence the boot is very slow. I have tried serveral way with pci-stub.ids in the grub menu but not work. In general how... (11 Replies)
Discussion started by: _Fabio_79
11 Replies

6. Linux

Vfio passtrough gpu, a question about hdmi

The situation videocard n°1 Nvidia Ge-force(used on host linux) videocard n°2 Ati radeon(used on guest windows 7) host is Slackware 14.2,kernel 4.18.15 I had set vfio to pass a ati card to windows7 guest Configure /etc/modprobe.d/vfio.conf options vfio-pci... (1 Reply)
Discussion started by: Linusolaradm1
1 Replies
CHECK_LM_SENSORS(7)					User Contributed Perl Documentation				       CHECK_LM_SENSORS(7)

NAME
"check_lm_sensors" - Nagios plugin to monitor hardware sensors and disk temperatures DESCRIPTION
check_lm_sensors is a Nagios plugin to monitor the values of on board sensors and hard disk temperatures on Linux systems VERSION
Version 3.1.1 SYNOPSIS
check_lm_sensors [--help] [--verbose] [--version] [OPTIONS] Options -?, --help help -l, --low specifies a check for a sensor value which is too low. -h, --high specifies a check for a sensor value which is too high. -r, --range specifies a check for a sensor value which should stay in a given range. --rename renames a sensor in the performance output (useful if you want to have common names for similar sensors across different machines) --sanitize sanitize sensor names (e.g., removing spaces) --nosensors disable checks on check lm_sensors --nodrives disable checks on drive temperatures -d, --drives enable checks on drive temperature --hddtemp_bin manually specifies the location of the hddtemp binary --sensors_bin manually specified the location of the sensors binary -v, --verbose verbose output --version prints $prog_name's version and exits REQUIRED ARGUMENTS
OPTIONS
EXAMPLE
DIAGNOSTICS
You can specify multiple --verbose options to increase the program verbosity. EXIT STATUS
0 if OK, 1 in case of a warning, 2 in case of a critical status and 3 in case of an unknown problem DEPENDENCIES
check_updates depends on o Carp o English o Getopt::Long o Nagios::Plugin o Nagios::Plugin::Threshold o version CONFIGURATION
INCOMPATIBILITIES
None reported. SEE ALSO
Nagios documentation BUGS AND LIMITATIONS
No bugs have been reported. Please report any bugs or feature requests to matteo.corti@id.ethz.ch, or through the web interface at https://svn.id.ethz.ch/trac/nagios_plugins/newticket AUTHOR
Matteo Corti <matteo.corti@id.ethz.ch> LICENSE AND COPYRIGHT
Copyright (c) 2007, ETH Zurich. This module is free software; you can redistribute it and/or modify it under the terms of GNU general public license (gpl) version 3. See the LICENSE file for details. DISCLAIMER OF WARRANTY
BECAUSE THIS SOFTWARE IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE SOFTWARE, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE SOFTWARE "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE SOFTWARE IS WITH YOU. SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING, REPAIR, OR CORRECTION. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR REDISTRIBUTE THE SOFTWARE AS PERMITTED BY THE ABOVE LICENCE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE THE SOFTWARE (INCLUDING BUT NOT LIMITED TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY YOU OR THIRD PARTIES OR A FAILURE OF THE SOFTWARE TO OPERATE WITH ANY OTHER SOFTWARE), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. ACKNOWLEDGMENTS
perl v5.14.2 2012-07-02 CHECK_LM_SENSORS(7)
All times are GMT -4. The time now is 01:27 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy