Sun X4600 M2 enable Hyperthreading Post: 302909494

8 More Discussions You Might Find Interesting

1. Solaris

Sun ONE Web Server 6.1 - enable SSL?

I've upgraded Iplannet 4.1 to Sun ONE Web Server 6.1. However. Now i can't seem to connect on port 4443 which was originally being used in 4.1 to deal with transactions....when i try to run a query on this port (4443) i get the following error: Access to the server was denied I suspect i...

2. Linux

Optimized Linux 2.6.10 Kernel for Dual Xeon with Hyperthreading

Anyone have tips on configuring the 2.6.10 kernel to take full advantage of dual 2.4 Ghz Xeons? I'm not getting expected benchmark results.... and seemingly was better off with a single 2600+ AMD processor.

3. Solaris

console for x4600

Hi, I ;ve a SUN x4600 running solaris 10. I want to connect to the system remotely form console like we can connect to sparc sc or alom ..

4. Solaris

x4600 iLOM issue

I need to configure the iLOM for x4600 server. before I can set the IP details and commit, I need to set network state should be enabled. However my firmware is already the latest and I need not upgrade. I am not able to set the /SP/network state to enable. pls assist. i BELIEVE the bug was fixed...

5. Solaris

Controller Issue on X4600 after reboot

One of my X4600 server had a power loss and rebooted and now its giving me a strange problem servers internal disk controller naming has changed by itself ... the after failsafe boot md.conf file shows following c3txdx but shows internal disk at c4txdx ... what could be the reason for this and...

6. Solaris

Sun Cluster query for enable/disable

Hi, I perform clrs enable/disable resource-group to start/shutown sybase db. If I do it through through scsetup , it asks for Do you require to change the state of resource "sybaseapp-rs" on individual nodes or zones that can master the resource (yes/no) ?. I am bit confused of above...

7. Solaris

Sunfire X4600 Errors on Bootup

Hi Folks, Has anyone seen these errors on bootup. Mar 15 12:22:30 svc.startd: svc:/system/device/local:default: Method "/lib/svc/method/devices-local" failed due to signal SEGV.ht (c) 1983, 2010, Oracle and/or its affiliates. All rights reserved. Configuring devices. ...

8. Hardware

Sunfire x4600 M2 NIC replacement

Hi All, I am having an Sun fire X4600 M2 server where one of the interfaces is down. I had requested for the replacement but had a bit problem in identifying the port. As per the server service module, there are 4 NIC ports and one port is not flashing (e1000g0) but as per server, the port...

LEARN ABOUT REDHAT

enable

enable(8)						      Easy Software Products							 enable(8)

NAME

       disable, enable - stop/start printers and classes

SYNOPSIS

       disable [ -E ] [ -c ] [ -h server ] [ -r reason ] destination(s)
       enable [ -E ] destination(s)

DESCRIPTION

       enable starts the named printers or classes.

       disable stops the named printers or classes.  The following options may be used:

       -c
	    Cancels all jobs on the named destination.

       -r [ reason ]
	    Sets the message associated with the stopped state. If no reason is specified then the message is set to "Reason Unknown".

       The -E option forces encryption when connecting to the server.

COMPATIBILITY

       The  CUPS versions of disable and enable may ask the user for an access password depending on the printing system configuration.  This dif-
       fers from the System V versions which require the root user to execute these commands.

SEE ALSO

       accept(8), cancel(1), lp(1), lpadmin(8), lpstat(1), reject(8), CUPS Software Administrators Manual, http://localhost:631/documentation.html

COPYRIGHT

       Copyright 1993-2002 by Easy Software Products, All Rights Reserved.

23 January 2001 					    Common UNIX Printing System 						 enable(8)