I have heard many times that this job cannot be done without knowing the source of my data and how it has been written on the tape and I agree with you. Unfortunately, I must do it without any insight and this is the reason why I started looking at its hexadecimal notation with an hex editor.
The tape is a mix of metadata and voice audio and I need to figure out how I can decrypt both these source within the image.
Thanks to the hex editor I now understand that before each audio there is a piece information concerning the audio.
The information above is regarding this info.
My knowledge about reverse engineering is limited but I must do it (Job is Job )
Apprarently I was previously wrong since I have copied and pasted this piece of data on this
Hi, (HP-UX 11.11)
I need to create a tape image of an igniteUX image created on our igniteUX server.
That is to say. I have a "Online" image of the igniteUX of the targeted system but I now need to copy it to a useable TAPE (igniteUX) image so i can build an other server from it that is not... (3 Replies)
Hi, I'm using putty and when I try to write ü it writes | (or when I try to write é , it writes i)
I tried to change settings/translation of putty but with no success
I have KSH
# locale
LANG=
LC_CTYPE="C"
LC_NUMERIC="C"
LC_TIME="C"
LC_COLLATE="C"
LC_MONETARY="C"
LC_MESSAGES="C"... (3 Replies)
Hi All,
I want to do URL encoding using shell script in my project. I decided that the sed is the correct tool to do this. But I am unable achieve what I wanted using sed. kindly help me to get rid of this.
My requirement is , there will be one URL with all special character, spaces etc...
... (8 Replies)
hi folks ,
I have a shell script which contain SQL query that dump some data from the DB in arabic and this data is written to a file in unix machine but the problem that the arabic data is appear like ??????????|111|???????? even when I move it to my windows XP machine.
Any one have an Idea... (2 Replies)
Hi experts,
I have a gz file from other system(solaris), which is ftped to our system(solaris).
After gunzip, the file is a xml file and we are using ORACLE built in xml transformiing tool ORAXSL to transform XML to TXT.
Now the issue is we come accross issue regarding UTF8 as below:... (1 Reply)
Hi,
I am beginner to Unix.
My requirement is to validate the encoding used in the incoming file(csv,txt).If it is encoded with UTF-8 format,then the file should remain as such otherwise i need to chnage the encoding to UTF-8.
Please advice me how to proceed on this. (7 Replies)
Hi All,
Hope you can help me with the below :).
I'm working on a script on SUN solaris and I'm facing a problem with the number encoding as shown below,
1 is encoded to 31 (this is ASCII so it's ok)
11 is encoded as B118 !!! don't know why
111 is encoded as B1580C !!! don't know why ... (4 Replies)
Hi, I have two sets of image files. Both sets have names A to Z but set 1 ends with .cdt.png and set 2 ends with .matrix.png. I want set 1 to match with set 2 if the names match (i.e. A.cdt.png will match with A.matrix.png) and with the convert image tool (program for images), it will merge the... (6 Replies)
Hi all!!
I´m using command file -i myfile.xml to validate XML file encoding, but it is just saying regular file . I´m expecting / looking an output as UTF8 or ANSI / ASCII
Is there command to display the files encoding?
Thank you! (2 Replies)
Discussion started by: mrreds
2 Replies
LEARN ABOUT OPENSOLARIS
mkdevalloc
mkdevalloc(1M) System Administration Commands mkdevalloc(1M)NAME
mkdevalloc - Make device_allocate entries
SYNOPSIS
/usr/sbin/mkdevalloc
DESCRIPTION
The mkdevalloc command writes to standard out a set of device_allocate(4) entries describing the system's frame buffer, audio and removable
media devices.
The mkdevalloc command is used by the init.d(4) scripts to create or update the /etc/security/device_allocate file.
Entries are generated based on the device special files found in /dev. For the different categories of devices, the mkdevalloc command
checks for the following files under /dev:
audio /dev/audio, /dev/audioctl, /dev/sound/...
tape /dev/rst*, /dev/nrst*, /dev/rmt/...
floppy /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
removable disk /dev/sr*, /dev/nsr*, /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
frame buffer /dev/fb
All entries set the device-minimum and device-maximum fields to the hex representations of ADMIN_LOW and ADMIN_HIGH, respectively. The
device-authorization field is set to solaris.device.allocate, except for the framebuffer entry, where it is set to *. The device-name,
device-type and device-clean fields are set to the following values:
device-name device-type device-clean
audio audio audio audio_clean_wrapper
tape mag_tape_0,1,... st st_clean
floppy floppy_0,1,... fd disk_clean
removable disk cdrom_0,1,... sr disk_clean
frame buffer framebuffer fb /bin/true
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Obsolete |
+-----------------------------+-----------------------------+
SEE ALSO allocate(1), bsmconv(1M), attributes(5)NOTES
mkdevalloc might not be supported in a future release of the Solaris operating system.
SunOS 5.11 8 Oct 2003 mkdevalloc(1M)
06-16-2014
) 