Hello Moto
I hope someone can help
We's here at work, have a unix box with sco openserver 5 on it, so it has a nice gui interface.. and also a fair few windows computers..
a system admin guy b4 me, has set up a user called neil, which can, when u try to access the unix box using windows... (2 Replies)
I cannot install sco on this particular ibm server because sco cannot find the raid controller and thefore the logical drive.
I have a floppy disk that I use in other machines when boot: shows on the screen. I usually type restart link=ad320 and it works but this time i have no floppy drive.
... (1 Reply)
Hi my name is Danilo.
I'm trying to install Sco foxbase + 2.1.2d. When i tried to install it with "custom" command, i receive the error:
"sed: cannot open: ./tmp/perms/prep/*/prep.message: No such file or directory (error 2)
The Operative System is Sco Open Server 5.0.7v (the virtualized version... (1 Reply)
Hi my name is Danilo.
I'm trying to install Sco foxbase + 2.1.2d. When i tried to install it with "custom" command, i receive the error:
"sed: cannot open: ./tmp/perms/prep/*/prep.message: No such file or directory (error 2)
The Operative System is Sco Open Server 5.0.7v (the virtualized version... (1 Reply)
I have a CD SCO Unix Open Server Version 5.0.2 but I am missing the botable 1.44 floppy disk.Can any one please tell me where can I download the botable disk? Also I have HP Pavillion 512 MB RAM and 20 GB Hard disk can I use this machine for the installation of SCO Unix?
Thanks (4 Replies)
Discussion started by: mustish1
4 Replies
LEARN ABOUT DEBIAN
hmount
HMOUNT(1) General Commands Manual HMOUNT(1)NAME
hmount - introduce a new HFS volume and make it current
SYNOPSIS
hmount source-path [partition-no]
DESCRIPTION
hmount is used to introduce a new HFS volume. A UNIX pathname to the volume's source must be specified. The source may be a block device or
a regular file containing an HFS volume image.
If the source medium is partitioned, one partition must be selected to be mounted. If there is only one HFS partition on the medium, it
will be selected by default. Otherwise, the desired partition number must be specified (as the ordinal nth HFS partition) on the command-
line. Partition number 0 can be specified to refer to the entire medium, ignoring what might otherwise be perceived as a partition map,
although in practice this is probably only useful if you want this command to fail when the medium is partitioned.
The mounted volume becomes "current" so subsequent commands will refer to it. The current working directory for the volume is set to the
root of the volume. This information is kept in a file named .hcwd in the user's home directory.
If the source medium is changed (e.g. floppy or CD-ROM disc exchanged) after hmount has been called, subsequent HFS commands will fail
until the original medium is replaced or a different volume is made current. To use the same source path with the different medium, reissue
the hmount command.
EXAMPLES
% hmount /dev/fd0
If a Macintosh floppy disk is available as /dev/fd0, this command makes the floppy current for other HFS commands such as hls(1),
hcd(1), hcopy(1), etc.
% hmount /dev/sd2 1
If a SCSI disk is available as /dev/sd2, this command finds the first HFS partition on the medium and makes it available for other
HFS operations.
NOTES
hmount does not actually mount an HFS partition over a UNIX directory in the traditional mount(8) sense. It is merely a "virtual" mount, as
a point of convenience for future HFS operations. Each HFS command independently opens, operates on, and closes the named source path given
to hmount.
SEE ALSO hfsutils(1), hformat(1), humount(1), hvol(1)FILES
$HOME/.hcwd
AUTHOR
Robert Leslie <rob@mars.org>
HFSUTILS 08-Nov-1997 HMOUNT(1)