Just a quick update - here is the code that I ended up with - it does work on Solaris 11.1 I have hard coded the hostid I wanted "80b6400d" into the script - I'll post the whole script when I complete it.
Code:
ascii=`echo $((0x80b6400d)) | od -t x1 | head -1 | cut -f2-100 -d" "`
echo "hw_serial/v "${ascii:0:$((${#ascii}-2))}"00 0" | mdb -kw
echo "hostid is now set to: "`hostid`;echo " "
Hi All ,
I try to install some packages in my global zone...
On the execution of the installion of the script it quits by saying the error
"Non global zone check failed"
Kindly help me in this regard
Thanks in advance,
jeganr (7 Replies)
I have configured three zones on Solaris-11. These are non-global zones contain Solaris-11 only. One of the zone is not booting up, complaining about IP address in use, while it is not.
root@tdpdmsp02 # zoneadm list -icv
ID NAME STATUS PATH BRAND IP... (3 Replies)
Have 2 nics on physical system
net0 phys 1500 up --
net1 phys 1500 up --
1. I want to create a link aggregation with LACP enabled with above 2 nics
2. Create port-group(Like we create on ESXi) with VLAN-ID 2141
3. And assign this... (0 Replies)
Am new on Solaris
If I compare with ESXi default timezone is UTC and we have to set BIOS timezone to UTC too .
What we follow and best practice in Solaris Sparc servers .
Thanks in advance . (2 Replies)
I can't compile anything, the final make error says "Command failed for target `install-recursive'", but I am not able to identify the root cause of that error, I tried with cc, gcc 4.5, also gcc 5.2, using make, using gmake 3.82, ld 5.11, gld 2.31... and I am totally stuck yet... please help, to... (4 Replies)
I am planning to do solaris 11 global zone patching having solaris 10 branded zone. I have a doubts on step 8 specially
Can someone clear my step 8 doubts or if anything wrong between step 1 to step 9 please correct that also as I have pretty good idea about Step 10 mean patching in solaris 10... (2 Replies)
Hi, hoping someone can help, its been a while since I used Solaris.
After creating a NGZ (non global zone), the NGZ can access the GZ (Global Zone) and the GZ can access the NGZ (using ssh, zlogin)
However, the NGZ cannot access any other netwqork devices, it can't even see the default router
... (2 Replies)
Discussion started by: GazinLincoln
2 Replies
LEARN ABOUT SUNOS
noecho
echo(3XCURSES) X/Open Curses Library Functions echo(3XCURSES)NAME
echo, noecho - enable/disable terminal echo
SYNOPSIS
cc [ flag... ] file... -I /usr/xpg4/include -L /usr/xpg4/lib
-R /usr/xpg4/lib -lcurses [ library... ]
c89 [ flag... ] file... -lcurses [ library... ]
#include <curses.h>
int echo(void);
int noecho(void);
DESCRIPTION
The echo() function enables Echo mode for the current screen. The noecho() function disables Echo mode for the current screen. Initially,
curses software echo mode is enabled and hardware echo mode of the tty driver is disabled. The echo() and noecho() functions control soft-
ware echo only. Hardware echo must remain disabled for the duration of the application, else the behavior is undefined.
RETURN VALUES
Upon successful completion, these functions return OK. Otherwise, they return ERR.
ERRORS
No errors are defined.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Interface Stability |Standard |
+-----------------------------+-----------------------------+
|MT-Level |Unsafe |
+-----------------------------+-----------------------------+
SEE ALSO getch(3XCURSES), getstr(3XCURSES), initscr(3XCURSES), libcurses(3XCURSES), scanw(3XCURSES), attributes(5), standards(5)SunOS 5.10 5 Jun 2002 echo(3XCURSES)
04-21-2014
