As the title implies I'm having trouble setting up Wake-On-LAN with my Debian box. Here is the output from ethtool and my /etc/network/interfaces:
It looks like its set up right, but when I test starting the machine from another Debian computer on the LAN I use this machine's mac address as the only parameter with both etherwake and wakeonlan and get nothing. I read the wiki on this, but have never set this up before any don't know what I'm doing. Any help much appreciated.
I am having trouble confiuring pine. I have downloaded it on 2 computers 1 with freebsd and the other fedora and I am getting the same result in both. Both say "folder does not exist","no folder to open". I went into set up and configured personal name,user-domain,smtp-server,inbox-path. I know I... (1 Reply)
Im old to Unix but new to scripting
I have a MacBook running osx that I want to use as an nfs client. The server will be a linux box with a wake on lan card. Here's the idea. Run a cron command on the mac every minute that checks if I am on my home wireless network (the linux box is wired to... (0 Replies)
m old to Unix but new to scripting
I have a MacBook running osx that I want to use as an nfs client. The server will be a linux box with a wake on lan card. Here's the idea. Run a cron command on the mac every minute that checks if I am on my home wireless network (the linux box is wired to... (6 Replies)
Hi,
I have an IA machine on which I want to install the HP 11.31 from LAN.
I have the lan card and ignite server available.
How do I need to configure the LAN card to be able to boot from it and install the OS?
Thanks in advance
Pritam (2 Replies)
Hi guys,
Two boxes on the same .23 subnet 192.168.1.x
The box I wanted to shutdown and restart remotely
went down, but didn't come back up when I used ether-wake 00:11:22:etc:etc:
The sleeper has two nics, but only one with cable. I configured both nics to wake on lan using the g option.
The... (0 Replies)
Hi,
We have a website running on a local centos 5.4 surfer, static IP.
The domain.com uses no-ip.com to take care of the DNS, it forwards all to my server.
My router receives the port 80 call, routes it to my server and the world can see domain.com perfectly fine.
However, we cannot see... (3 Replies)
I am facing strange problem regarding hostname on my Linux(2.6.18-164.el5xen x86_64 GNU/Linux), the hostname changes if reboot with lan cable and with NO lan cable
Reboot with lan cable:
The hostname is ubunut
Unable to connect Oracle database using sqlplus some times database is not... (2 Replies)
Hi guys,
I am creating two posix threads. I have some queries, hopefully you will help me out with them
1) How can I put a thread to indefinite sleep, for indefinite time period. I am familiar with this
sleep(5);
for 5 second, how can I make it indefinite??
2) How can one thread wake another... (11 Replies)
Discussion started by: gabam
11 Replies
LEARN ABOUT PHP
txp
TXP(4) BSD Kernel Interfaces Manual TXP(4)NAME
txp -- 3Com 3XP Typhoon/Sidewinder (3CR990) Ethernet interface
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device txp
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_txp_load="YES"
DESCRIPTION
The txp interface provides access to the 10Mb/s and 100Mb/s Ethernet networks via the 3Com Typhoon/Sidewinder chipset.
Basic Ethernet functions are provided as well as support for vlan(4) tag removal and insertion assistance, receive ip(4), tcp(4), and udp(4)
checksum offloading, and transmit ip(4) checksum offloading. There is currently no support for transmit tcp(4) or udp(4) checksum offload-
ing, tcp(4) segmentation, nor ipsec(4) acceleration.
Each of the host's network addresses is specified at boot time with an SIOCSIFADDR ioctl(2). The txp interface employs the address resolu-
tion protocol described in arp(4) to dynamically map between Internet and Ethernet addresses on the local network.
When a txp interface is brought up, by default, it will attempt to auto-negotiate the link speed and duplex mode. The speeds, in order of
attempt, are: 100Mb/s Full Duplex, 100Mb/s Half Duplex, 10 Mb/s Full Duplex, and 10 Mb/s Half Duplex.
The txp supports several media types, which are selected via the ifconfig(8) command. The supported media types are:
media autoselect
Attempt to autoselect the media type (default)
media 100baseTX mediaopt full-duplex
Use 100baseTX, full duplex
media 100baseTX [mediaopt half-duplex]
Use 100baseTX, half duplex
media 10baseT mediaopt full-duplex
Use 10baseT, full duplex
media 10baseT [mediaopt half-duplex]
Use 10baseT, half duplex
HARDWARE
The txp driver supports the following cards:
o 3Com 3CR990-TX-95
o 3Com 3CR990-TX-97
o 3Com 3cR990B-TXM
o 3Com 3CR990SVR95
o 3Com 3CR990SVR97
o 3Com 3cR990B-SRV
SEE ALSO altq(4), arp(4), inet(4), intro(4), ip(4), miibus(4), tcp(4), udp(4), vlan(4), ifconfig(8)HISTORY
The txp driver first appeared in OpenBSD 2.9.
BSD March 12, 2009 BSD