Network becomes slow and return fast only after restart network
Hi,
I have 2 machines in production environment:
1. redhat machine for application
2. DB machine (oracle)
The application doing a lot of small read&writes from and to the DB machine.
The problem is that after some few hours the network from the application to the DB becomes very slow and it returns to the normal only after:
Code:
service network restart
Before:
Code:
64 bytes from hostname.domain (xxx.xxx.xxx.xxx): icmp_seq=1 ttl=63 time=7.81 ms
64 bytes from hostname.domain (xxx.xxx.xxx.xxx): icmp_seq=2 ttl=63 time=5.88 ms
64 bytes from hostname.domain (xxx.xxx.xxx.xxx): icmp_seq=3 ttl=63 time=7.81 ms
After restart network:
Code:
64 bytes from hostname.domain (xxx.xxx.xxx.xxx): icmp_seq=84 ttl=63 time=0.135 ms
64 bytes from hostname.domain (xxx.xxx.xxx.xxx): icmp_seq=85 ttl=63 time=0.171 ms
64 bytes from hostname.domain (xxx.xxx.xxx.xxx): icmp_seq=86 ttl=63 time=0.153 ms
What can it be?
How can i solve this strange behavior?
Hello, everyone:
i encounter a problem these days , pls help me ,thanks in advance.
my env:
machine: ES40 A ES40 B
os: true64 Unix 4.0f
note: src.tar 8M network card speed 100M
my problem:
... (3 Replies)
Hi,
I am trying to send oracle archives over WAN and it is taking hell a lot of time. To reduce the time, I tried to gzip the files and send over to the other side. That seems to reduce the time. Does anybody have experienced this kind of problem and any possible ways to reduce the time.
... (1 Reply)
At work, I'm in a Solaris environment working with csh, and $PATH is populated with anywhere between 10 and 20 entries.
Last week, every command I issued (even "ls") took several seconds, if not an entire minute, to run. Once I moved "/home/sybase/bin" to the end of $PATH, certain commands... (2 Replies)
hey guys,
We have two Sun x2100 servers running RHEL5 in a test environment. Both servers are fresh OS installs and hooked up to the same network switch.
When ssh'ing to one server, there is a significant delay, while ssh'ing to the other server, the connection is almost instant. We are... (2 Replies)
Hi All,
Please let me know the command to restart the network interface and enable it on boot in AIX, similar to /etc/init.d/network restart in Redhat.
Thanks,
Sunil.K
please watch out to post in the right subforum! (9 Replies)
Hi Guys,
I've inherited a mess of an infrastructure in my new job, there hasn't been a sys admin in post for about a year, so things are falling apart. The first thing to break after I started was the printer server. I have it working again, and people can print, however it's very slow, slower... (0 Replies)
I have identical M5000 machines that are needing to transfer very large amounts of data between them. These are fully loaded machines, and I've already checked IO, memory usage, etc... I get poor network performance even when the machines are idle or copying via loopback. The 10 GB NICs are... (7 Replies)
Hello everyone,
I've been a life long Unix/Linux user but I'll be the first to admit I have little specific AIX knowledge at this point and I've inherited these systems for better or worse so please forgive if I ask something in the wrong context. And yes, I've searched google for 3 days now :)... (3 Replies)
Hello,
I would like to do follow steps.
Set a static IP-Adress on eth0 (For Testing)
Set DHCP on eth0
All steps should be done without a single reboot.
/etc/network/interfaces
iface eth0 inet static
address 192.0.2.7/24
gateway 192.0.2.254How do i perform... (3 Replies)
Discussion started by: int3g3r
3 Replies
LEARN ABOUT DEBIAN
lurker-search
LURKER-SEARCH(1) General Commands Manual LURKER-SEARCH(1)NAME
lurker-search -- searches for messages in a lurker database
SYNOPSIS
lurker-search [-c <config-file>] [-k <keyword>] [-d -f -i -v -q] [<terms>*]
DESCRIPTION
lurker-search searches a lurker database the same way as the web interface. It can output summary information and delete messages.
OPTIONS -c config-file
Use this config file for lurker settings.
-k keyword
Tag the matching messages with this keyword.
-d Delete the messages found by this search
-f Don't prompt before deleting
-i Command line paramers are not search terms, but message IDs.
-v Output message summary information
-q Don't output message ids or status
SEARCH TERMS
Lurker-search accepts these keywords for searching:
-xxx select messages which do NOT match this term
id:xxx select a message by the Message-ID field
rt:xxx select messages which reply to the chosen Message-ID
th:xxx select messages included in this thread
ml:xxx select messages in this mailing list
gr:xxx select messages in this mailing list group
au:xxx select messages with this term in the author fields
sb:xxx select messages with this word in the subject
lang:xxx select messages in this language
SEE ALSO lurker-index(1), lurker-prune(1), lurker-params(1), lurker-list(1)
lurker documentation on http://lurker.sourceforge.net/
COPYRIGHT
Copyright (C) 2002: Wesley W. Terpstra <terpstra@users.sourceforge.net>
This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by
the Free Software Foundation; version 2.
This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of MER-
CHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for more details.
You should have received a copy of the GNU General Public License along with this program; if not, write to the Free Software Foundation,
Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
BUGS
Before reporting a bug, please confirm that the bug you found is still present in the latest official release. If the problem persists,
then send mail with instructions describing how to reproduce the bug to <lurker-users@lists.sourceforge.net>.
LURKER-SEARCH(1)