Same IP | Different port | Different MAC Post: 302888733

6 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Sunblade shows 2 MAC address on same port

Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight....

2. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

3. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

4. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

5. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

6. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ...

LEARN ABOUT DEBIAN

net::sip::nathelper::local

Net::SIP::NATHelper::Local(3pm) 			User Contributed Perl Documentation			   Net::SIP::NATHelper::Local(3pm)

NAME

       Net::SIP::NATHelper::Local - handle NAT/RTP forwarding in local event loop.

DESCRIPTION

       This module is a wrapper around Net::SIP::NATHelper::Base which will handle the RTP forwarding within the local event loop the rest of
       Net::SIP uses.

CONSTRUCTOR

       new ( LOOP )
	   Will create the object and tell it to use LOOP as the event loop.  Will create a Net::SIP::NATHelper::Base object which gets used
	   internally.

METHODS

       allocate_sockets ( ... )
	   Calls allocate_sockets of the local Net::SIP::NATHelper::Base object. Takes and returns the same arguments.

       activate_session ( ... )
	   Calls activate_session of the local Net::SIP::NATHelper::Base object. Takes the same arguments and returns 1 if the session was newly
	   activated, -1 if it was activated before and false if activation failed.  Updates callbacks into the event loop.

       close_session ( ... )
	   Calls activate_session of the local Net::SIP::NATHelper::Base object. Takes the same arguments and returns the number of closed
	   sessions.  Updates callbacks into the event loop.

       expire ( ... )
	   Calls expire of the local Net::SIP::NATHelper::Base object. Takes the same arguments and returns the number of expired sessions.
	   Updates callbacks into the event loop if necessary.

perl v5.14.2							    2009-01-23					   Net::SIP::NATHelper::Local(3pm)