Same IP | Different port | Different MAC Post: 302888733

6 More Discussions You Might Find Interesting

1. UNIX for Advanced & Expert Users

Sunblade shows 2 MAC address on same port

Please, can someone tell me why my SunBlade would be showing 2 different but similar MAC addresses on the same port on the Switch? The switch shows all other Workstations with 1 MAC on each port, but the SunBlade is showing 2. Thanks in advance for any insight....

2. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

3. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

4. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

5. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

6. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ...

LEARN ABOUT HPUX

cmhaltcl

cmhaltcl(1m)															      cmhaltcl(1m)

NAME

       cmhaltcl - halt a high availability cluster

SYNOPSIS

       cmhaltcl [-f] [-v]

DESCRIPTION

       cmhaltcl  causes  all  nodes  in a configured cluster to stop their cluster daemons, optionally halting all packages or applications in the
       process.

       To stop a cluster, a user must either be superuser(UID=0), or have an access policy of FULL_ADMIN  allowed  in  the  cluster  configuration
       file. See access policy in cmquerycl(1).

       This  command  will  halt  all  the  daemons on all currently running systems.  If the user only wants to shutdown a subset of daemons, the
       cmhaltnode command should be used instead.

   Options
       cmhaltcl supports the following options:

	      -f   Force the cluster to shutdown even if packages or group members are currently running.  This will cause the packages and  group
		   members to be halted.  If a package halt fails, the cluster halt will also fail.

	      -v   Verbose output will be displayed.

RETURN VALUE

       cmhaltcl returns the following value:

	       0   Successful completion.
	       1   Command failed.

EXAMPLES

       Halt the cluster daemons:

	      cmhaltcl

AUTHOR

       cmhaltcl was developed by HP.

SEE ALSO

       cmquerycl(1m), cmhaltnode(1m), cmruncl(1m), cmrunnode(1m), cmviewcl(1m).

						      Requires Optional Serviceguard Software					      cmhaltcl(1m)