when using extendvg you are saying you want to combine 2 or more hdisk into one vg. this is not to actually increase the size of the vg. ok so according to your first post you did try
and you did not see the change.
using extendvg would be used if you had assinged a new disk and then wanted to combine that disk to oravg.
usage would be: This is not your case.
do try this:
if you are not seeing the disk changes make sure the disk changes are made correctly.
how are you assigning the disk changes? are you using SAN or assigned to the vio, NPIV?
send the output of:
lsdev -Cc disk |grep hdisk2
highly suggest reviewing the man pages before using these commands:
if
are not seeing the change I'm going to strongly suggest to review how the storage was added.
Hi All,
I am new to AIX.
I need to extend one Logical Volume it is jfs type on On AIX 5.1.
I have enough free space on the volume group for this extension
Can I use smitty chjfs , will this do it without interruptions to the application that is using this Logical Volume.
Thanks
Scampi (1 Reply)
Hi,
Smit "Increase the Size of a Logical Volume" command failed. Output:
----------------------------------------------------------
Command: failed stdout: yes stderr: no
Before command completion, additional instructions may appear below.
The distribution of this command (111) failed on... (2 Replies)
We want to deactivate a VG but failed, because one of the LVs created there is busy. When we are trying to unmount the LV, it is telling "not mounted" and if I execute mount command it will be informing us "already mounted". dmsetup info is indicating "Open Count = 1".
Please help me, how we... (5 Replies)
My volume group of size 200 gb.
out of which only 100 gb is used by 2 logical volumes /dev/vg00/lvol0 and /dev/vg00/lvol0 respectively (both are 50 gb each).
Whenever i use vgreduce command to reduce the size of volume group i get below error.
# vgreduce vg00 -a
Physical volume... (16 Replies)
Hi,
I am new to unix. I am working on Red Hat Linux and side by side on AIX also. After reading the concepts of Storage, I am now really confused regarding the terminologies
1)Physical Volume
2)Volume Group
3)Logical Volume
4)Physical Partition
Please help me to understand these concepts. (6 Replies)
hi,
I want to create a volume group of 200 GB and then create different file systems on that.
please help me out. Its becomes confusing when the PP calculating PP.
I don't understand this concept. (2 Replies)
Dear Expret,
Help me about my issue,
I trying add new disk to volume Group but error:
step add new disk to volume group.
1. ~Change a Volume Group
Add a Physical Volume to a Volume Group
Remove a Physical Volume from a Volume Group
Reorganize a Volume Group... (6 Replies)
Hello Guys,
I want to create a file system dedicated for an application installation. But there is no space in volume group to create a new logical volume. There is enough space in other logical volume which is being mounted on /var.
I know we can use that logical volume and create a virtual... (2 Replies)
Dear All,
We have an Oracle running on AIX 6.1, now there have an disk spaces issue and we found that we cannot perform to extend the logical volume. Could help to review and make some suggestions.
Status:
we already provisioned some disks to the host, new disks can be scan and add into the... (11 Replies)
Discussion started by: lckdanny
11 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)