thanks a lot CarloM...i am able to filter out the number of cores using this option
---------- Post updated at 07:46 AM ---------- Previous update was at 07:30 AM ----------
could you please aslo help me in getting the below output as u mentioned
print_manifest | awk '/core/ { print $1 }' gives two line output in my case output is like :
Code:
# print_manifest | awk '/core/ { print $1 }'
8
1
i want to print the last line and i am doing it using command :
Hi
I have tried this command
cat /etc/passwd | awk -F: '{print$5}'
note that the $5 is the column that displays full name- i.e. Kevin Kambell
To the point, my output is fine except one thing I do not understand that some of output lines have space in front of them which I checked in... (7 Replies)
Hi -
I have a file with contents as below.
12.1 a.txt
12.1 b.txt
12.1 c.txt
13.2 a.txt
13.2 d.txt
14.3 f.txt
15.4 a.txt
15.4 b.txt
15.4 z.txt
I need to print the contents like this.
12.1 a.txt
< >< >< >b.txt
< >< >< >c.txt (7 Replies)
Hi
I have a wireshark file saved (from my network) and I have to analyze the flows inside it.
The problem is that i have to analyze not the complete file (60.000 pkts!) but just a subset of it.
In other words i have to sample the wireshark.file.dump and for example from 60.000 pkts take... (2 Replies)
i have a file which gets appended with 9 records daily and the file keeps growing from then...i use to store the previous day files count in a variable called oldfilecount and current files count as newfilecount.my requirement is that i need to start processing only the new records from the... (3 Replies)
Hey,
I'm using some sensors that can be read by http.
If I run following command:
curl -v 'http://192.168.111.23:8080/sensor/52f5c63cc4221fbbedcb499908a0a823?version=1.0&interval=minute&unit=watt&callback=realtime'
I'm getting:
I would like to put this now in a sheet with only the... (9 Replies)
Hi ,
I am trying to filter out the below output of fdisk -l command :
fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 ... (9 Replies)
Hello guys,
I'm writing a little script which sends me sms with my shell script via api of a sms provider.
problem is I can't filter my curl output for this site:
site url:... (1 Reply)
Hi Team(Solaris 5.8/Ksh),
How can we save grep output to awk variable when grep returns more than one line or word.
abc.log
# more abc.log
Hi Makarand
How r u
bye Makarand
Hello
when grep returns only 1 word below command works
nawk -v var=`cat abc.log |grep "Hello"` 'BEGIN { if... (6 Replies)
Hi all,
In my SunOS 5.10, the command awk using BEGIN option doesn't print output variables like expected
here is my test:
with the following code everything is alright
ps -eo pcpu,args | grep "httpd" | awk ' { print $1 } '
the result is
0.1
However, with this command
ps -eo... (3 Replies)
Discussion started by: Elmassimo
3 Replies
LEARN ABOUT HPUX
pset_ctl
pset_ctl(2) System Calls Manual pset_ctl(2)NAME
pset_ctl() - processor set control
SYNOPSIS DESCRIPTION
The function provides a means to query the system processor set configuration and assignment information. The request argument specifies
what information is needed for the pset processor set. The following request values are supported:
Return the ID of the processor set binding for the calling thread.
The pset and id arguments are ignored.
Return the ID of the first locality domain contributing to the processor set
pset. The id argument is ignored.
Return the ID of the first processor in the processor set
pset that is in the proximity of the processor specified by id. Even when the processor given by id is enabled, the return value
will be -1 if none of the proximate processors contribute to the processor set pset. If the processor given by id is not
enabled, -1 is returned.
See mpctl(2) for details on proximate processors.
Return the ID of the first processor set in
the system. The pset and id arguments are ignored.
Return the ID of the first processor in the processor set
pset. It will return -1 if the processor set is empty. Any processors in the processor set that is in transition are ignored.
The id argument is ignored.
Return the ID of the next locality domain after the locality domain specified in
id that contributes to the processor set pset.
Typically, is called to determine the first locality domain in a processor set. is then called in a loop (until the call returns
-1) to determine the IDs of the remaining locality domain in the processor set.
Return the ID of the next processor in the processor set
pset that is in the proximity of the processor specified by id.
Typically, is called to determine the first proximate processor. is then called in a loop (until the call returns -1) to deter-
mine the IDs of the remaining proximate processors.
Return the ID of the next processor set in the system after
pset. The id argument is ignored.
Typically, is called to determine the first processor set. is then called in a loop (until the call returns -1) to determine the
IDs of the remaining processor sets in the system.
Return the ID of next processor in the processor set
pset after the processor specified in id.
Typically, is called to determine the first processor in a processor set. is then called in a loop (until the call returns -1)
to determine the IDs of the remaining processors in the processor set.
Return the number of locality domains that have at least one processor
assigned to the processor set pset. The id argument is ignored.
Return the number of processors assigned to the processor set
pset that are in the proximity of the processor specified by id. Even when the processor given by id is enabled, the return
value will be 0 if none of proximate processors contribute to the processor set pset. If the processor given by id is not
enabled, -1 is returned.
Return the current number of processor sets in the system.
It will always be greater than or equal to one. The pset and id arguments are ignored.
Return the number of processors assigned to the processor set
pset. Any processors in the processor set that is in transition are not included. The id argument is ignored.
Return number of processors contributed by the locality domain specified by
id to the processor set pset.
Return the ID of the processor set assigned for the processor specified in
id. If the processor is not enabled or is in transition from one processor set to another, -1 is returned with an error. The
pset argument is ignored.
Logical Processor and Processor Core Information
On systems with the Hyper-Threading (HT) feature enabled, each processor core may have more than one hyper-thread per physical processor
core. When hyper-threading is enabled at the firmware level, each hyper-thread is represented to the operating system and applications as
a logical processor (LCPU). Hence the basic unit of any topology information is a logical processor. However, some applications may want
to get the system topology information at the physical processor core level.
Returns the number of processor cores assigned to the processor set
pset. Any processor cores in the processor set that are in transition are not included. The id argument is ignored.
Returns the ID of the first processor core in the processor set
pset. It will return -1 if the processor set is empty. Any processor cores in the processor set that is in transition are
ignored. The id argument is ignored.
Returns the ID of the next processor core in the processor set
pset after the processor specified in id. Typically, is called to determine the first processor core in a processor set. is
then called in a loop (until the call returns -1) to determine the IDs of remaining processor cores in the processor set.
Returns the number of enabled processor cores assigned to the processor set
pset.
Any user may query the system processor set topology using the function.
Use with name to see if the processor set functionality is supported by the underlying HP-UX operating system version.
RETURN VALUE
returns a value based on on successful completion.
Success.
The value is based on the request.
Failure.
is set to indicate the error.
ERRORS
sets to one of the following values if the corresponding condition is detected.
The request is invalid.
The specified processor set
pset, or the processor or the locality domain specified by id is invalid.
The request is and there is no other processor set after pset, or the request is and there is no other processor after id in pset, or
the request is and there is no other locality domain after id in pset, or the request is and there is no other proxi-
mate processor after id in pset.
The request is or and the processor specified by id is not enabled.
The processor set functionality is not supported by the
underlying HP-UX version.
EXAMPLES
Get total count and IDs of all processor sets in the system.
AUTHOR
was developed by HP.
SEE ALSO psrset(1M), mpctl(2), pset_assign(2), pset_bind(2), pset_create(2), pset_destroy(2), pset_getattr(2), pset_setattr(2), sysconf(2), privi-
leges(5).
pset_ctl(2)
01-28-2014
