The RedHat 6 Technical Notes suggest to try to boot the kernel with the parameter
so you might try that. But it looks to me like you have broken hardware. If that kernel parm doesn't work I would lean toward a hardware problem.
Hello there!
I have a RS-6000 7043-140 machine with AIX version 4.1.5, that is
working for almost 8 years now. It has a tty monitor. My problem
started when I upgraded my machine to install a gxt250 graphics adapter
card together with a 15" AOC VGA Monitor, logitech keyboard and mouse, ... (2 Replies)
I have an ultra 10 system, and am trying to install and verify a previously cloned hard drive, to make sure it works, that it really is a duplicate of the hard drive currently on an other server, etc.
I plugged in this cloned hard drive as master, only drive in the system.
No network LAN... (2 Replies)
Hi, I have a Unix box running HP-UX 10.20 and it suddenly won't boot. Every time it goes down the boot checklist, it hangs on "NFS client subsystem" and just continues to say busy/wait. I have read something about the /etc/auto_master but don't quite understand what has to happen to fix it. ... (4 Replies)
Why is one of my blade hanging and does nothing after trying to boot from CD???
==================
I tried to press 1....JS20 does not support SMS menu
Here's what I see after 30 minutes...
-------------------------------------------------------------------------------
... (0 Replies)
Hi guys,
i explain my problem:
I've FC10 64bit installed on a server Dell R410.
When i boot the system with eth0 or eth1 linked (only one eth linked), all work fine and the system start normally.
When i boot the system with eth0 + eth1 linked,
the system hang when the rpcind service... (1 Reply)
Hi folks,
I had problems trying to install SCO OpenServer 6 on a PC with no floppy drive and a SATA CD drive.
Eventually after advice received on this forum last week, I adopted a different approach by fitting the LSI HBA RAID adapter and associated disks into an older PC that does have CD and... (4 Replies)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (0 Replies)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (1 Reply)
Hi Experts,
I am facing one problem here which is one process always stuck in running state which causes the other similar process to sleep state . This causes my system in hanged state.
On doing cat /proc/<pid>wchan showing the "__init_begin" in the output.
Can you please help me here... (6 Replies)
Discussion started by: naveeng
6 Replies
LEARN ABOUT NETBSD
kloader
KLOADER(4) BSD Kernel Interfaces Manual KLOADER(4)NAME
kloader -- in-kernel bootloader
SYNOPSIS
options KLOADER
options KLOADER_KERNEL_PATH=""/netbsd""
DESCRIPTION
The kloader is the in-kernel bootloader for platforms that do not have a proper firmware.
Some platforms supported by NetBSD do not have a firmware that can boot the NetBSD kernel. Examples are game consoles (dreamcast port), and
handhelds (hpcarm, hpcmips, and hpcsh ports). On such platforms the bootloader is usually a host program that runs under the native OS.
This means that rebooting NetBSD is a lengthy process of booting into the native OS first, launching the bootloader program, and finally
booting NetBSD again. This problem is addressed by kloader, which allows the currently running kernel to serve as a bootloader for the ker-
nel being booted, thus avoiding the burden of booting into the native OS first.
When kloader is configured into the kernel, a call to reboot(2) causes the kloader to load the new kernel into memory, and arrange for con-
trol to be passed to the new kernel -- just like a standalone bootloader does. The new kernel then boots in the ordinary manner.
SEE ALSO reboot(2), boot(8), reboot(8)HISTORY
kloader first appeared in NetBSD 1.6.
BUGS
kloader ignores howto and bootstr arguments passed to the reboot(2) system call, and reboots the system with the previous boot settings.
kloader doesn't support booting compressed kernels.
The hpcarm port doesn't support kloader yet.
BSD April 3, 2004 BSD