I'm a FreeBSD newbie with some basic Linux experience. I have installed FreeBSD 9.2 with Squid and IPFW but am struggling to get dansguardian working. I have also installed apache24 which I believe is a pr-requisite dependency and that seems to be running happily enough
I have tried multiple forums and posts without success. I have double-checked that dansguardian-2.10.0.1.tar.gz is in /usr/ports/distfiles but I get the following error:-
Any help would be gratefully received
Thanks in advance
Andy Hounsome
Last edited by bartus11; 01-01-2014 at 08:47 AM..
Reason: Please use code tags
I've just Dl'd and installed the osxgnu package of danguardian and squid on my 10.2 machine, which is mainly used as a router/firewall (set up with brickhouse)
And now I'm not quite sure what to do next...I have a speedtouch 330 USB ADSL modem and I share the connection via built in ethernet. ... (1 Reply)
Hi, I am currently doing a project to remove the dependency on a web server of dansguardian if anyone has any tips or points either on sections of code I need to modify or about how to build a very very simple web server. I would be very appreciative
Thanks.. (4 Replies)
Hi everybody!
Sorry for my intrusion but I'd like to submit a problem which is driving me crazy!
To implement the application I'm working on I must set an application layer firewall,
consequently I've installed and configured on my machine Squid + Dansguardian vs 2.8
(I'm using Debianrelease... (2 Replies)
After much hitting my head to the wall with this meesages
root@crasher /workzone/dvd4_sfb-sol_x64]#./installer -verbose -installonly
5.0MP3 Installation Program
Copyright (c) 2008 Symantec Corporation. All rights reserved. Symantec, the Symantec... (1 Reply)
Hi,
I am trying to install Free BSD release 8.0 on my Dell XPS Studio laptop along with already existing Windows partition. (150GB for Win Vista, 30GB for win backup and 130 GB for Free BSD). To do trial I first installed it on Sun virtual Box in Windows where it installed without any complaints.... (2 Replies)
well hi to all
The thing is I need to allow particular site to just one or 2 user
not to everybody. Can anybody tell me how do i do it. If i put there
ip in exception then whole Restriction would be bypassed which i dont
want. Your Responses would be highly appreciated
THANKS in ADVANCE (0 Replies)
Hi all,
I am a newbie with sunblade 2000 hardware.
I need to format the server and re-install a new solaris release, and I don't know how to do... If I try to boot on a CD, it didn't boot, Is it normal ?
Do I need to go to a bios ? what is the key sequence ? to plug a console ? on which port ?... (1 Reply)
Hi,
I am getting below error while trying to install oracle 12c release 2 on rhel 7.
$ ./runInstaller
Starting Oracle Universal Installer...
Checking Temp space: must be greater than 500 MB. Actual 10828 MB Passed
Checking swap space: must be greater than 150 MB. Actual 2559 MB ... (2 Replies)
Hi guy,
I am new to Linux,can I know how can I download the epel-release offline package to install as my centos 7 is not connect to Internet . Any help is appreciated (2 Replies)
Discussion started by: leecopper
2 Replies
LEARN ABOUT FREEBSD
zfsboot
ZFSBOOT(8) BSD System Manager's Manual ZFSBOOT(8)NAME
zfsboot -- bootcode for ZFS on BIOS-based computers
DESCRIPTION
zfsboot is used on BIOS-based computers to boot from a filesystem in a ZFS pool. zfsboot is installed in two parts on a disk or a partition
used by a ZFS pool. The first part, a single-sector starter boot block, is installed at the beginning of the disk or partition. The second
part, a main boot block, is installed at a special offset within the disk or partition. Both areas are reserved by the ZFS on-disk specifi-
cation for boot use. If zfsboot is installed in a partition, then that partition should be made bootable using appropriate configuration and
boot blocks described in boot(8).
BOOTING
The zfsboot boot process is very similar to that of gptzfsboot(8). One significant difference is that zfsboot does not currently support the
GPT partitioning scheme. Thus only whole disks and MBR partitions, traditionally referred to as slices, are probed for ZFS disk labels. See
the BUGS section in gptzfsboot(8) for some limitations of the MBR scheme support.
USAGE
zfsboot supports all the same prompt and configuration file arguments as gptzfsboot(8).
FILES
/boot/zfsboot boot code binary
/boot.config parameters for the boot block (optional)
/boot/config alternative parameters for the boot block (optional)
EXAMPLES
zfsboot is typically installed using dd(1). To install zfsboot on the ada0 drive:
dd if=/boot/zfsboot of=/dev/ada0 count=1
dd if=/boot/zfsboot of=/dev/ada0 iseek=1 oseek=1024
If the drive is currently in use, the GEOM safety will prevent writes and must be disabled before running the above commands:
sysctl kern.geom.debugflags=0x10
zfsboot can also be installed in an MBR slice:
gpart create -s mbr ada0
gpart add -t freebsd ada0
gpart create -s BSD ada0s1
gpart bootcode -b /boot/boot0 ada0
gpart set -a active -i 1 ada0
dd if=/boot/zfsboot of=/dev/ada0s1 count=1
dd if=/boot/zfsboot of=/dev/ada0s1 iseek=1 oseek=1024
Note that commands to create and populate a pool are not shown in the example above.
SEE ALSO dd(1), boot.config(5), boot(8), gptzfsboot(8), loader(8), zfsloader(8), zpool(8)HISTORY
zfsboot appeared in FreeBSD 7.3.
AUTHORS
This manual page was written by Andriy Gapon <avg@FreeBSD.org>.
BUGS
Installing zfsboot with dd(1) is a hack. ZFS needs a command to properly install zfsboot onto a ZFS-controlled disk or partition.
BSD September 15, 2014 BSD