Execution of local commands for remote site. Post: 302877764

10 More Discussions You Might Find Interesting

1. Windows & DOS: Issues & Discussions

mapping FTP site as local drive

I have a small problem, there is one Win98 PC on our network, and I would like to map the FTP server that we have as one of the Win98's machine's local drives. I am by no means a Windows expert, instead my area is *NIX. The webserver is just a regualar webserver, within the LAN. I tried...

2. SCO

Openserver 5.0.4 can't be ping or telnet into from a remote site

Hi, Can anybody help me out why l can't not ping my server with Openserver 5.0.4 with my windows machine from a remote site. The machine could see the local LAN with the Router however, i can't ping or telnet unto the server from another site on the WAN. The default gateway was configure on the...

3. UNIX for Advanced & Expert Users

Commands to copy a tar.gz file from a Remote Unix Server to Local Desktop.

Hi, Just wanted to know, how can I ftp/transfer/copy a (design.tar.gz) archive from a Unix Server (sdmc222.sdmc.cp-srv.com) which is at a remote location, to my Windows Desktop. Obviously, it is not possible at cmd prompt on my Windows using the following commands :- ftp...

4. Shell Programming and Scripting

Can BASH execute commands on a remote server when the commands are embedded in shell

I want to log into a remote server transfer over a new config and then backup the existing config, replace with the new config. I am not sure if I can do this with BASH scripting. I have set up password less login by adding my public key to authorized_keys file, it works. I am a little...

5. Web Development

Creating a blog site on a local computer

Hello! I would like to create a blog website on a web domain of mine. The blog will be used for publishing economics-lated articles. I tried to use a few open source packages for blog creation (WorldPress, b2evolution, Movable type) which I wanted to test on a local computer before arranging...

6. HP-UX

configuring site-local IPv6 address

How do I configure site-local IPv6 address in HP-UX box? I can get link local IPv6 address automatically when I put IPv6 up. aps39-88-root# ifconfig lan0 inet6 up

7. Solaris

Remote execution of a local script on multiple servers

So I have a scriptlet called solaris_command: for i in \ server1 server2 server3 do echo $i ssh $i $1 echo "" done I then use that as a command in multiple scripts to allow for data gathering for all virtual hosts in the environment thusly: solaris_command "cat...

8. Shell Programming and Scripting

To run a local shell script in a remote machine by passing arguments to the local shell script

I need to run a local shell script on a remote machine. I am able to achieve that by executing the command > ssh -qtt user@host < test.sh However, when I try to pass arguments to test.sh it fails. Any pointers would be appreciated.

9. Shell Programming and Scripting

Pause processes in remote host and resume execution in another remote host

Hi, Given addresses of 2 remote machines, using a shell script is it possible to get the state of running processes in "src" stop all the processes in "src" exit out of "src" ssh into "dest" resume the state of executing processes captured in step 1 in "dest" Assumption: "src" is...

10. Shell Programming and Scripting

Copy from local to remote

Hi I need a advice for writing simple bash script, I have a file pod.txt which contains source location and remote location: /mnt/infile/20141103/701_0001.png/remote/tmp/pk21730/p0330223723074.png /mnt/infile/20141103/203_0001.png/remote/tmp/pk21731/p0330223723081.png and I must copy ...

LEARN ABOUT HPUX

uusnap

uusnap(1M)																uusnap(1M)

NAME

       uusnap - show snapshot of the UUCP system

SYNOPSIS

DESCRIPTION

       The commands, including are targeted for removal from HP-UX; see the below.

       displays in tabular format a synopsis of the current UUCP situation.  The format of each line is as follows:

	      site    N Cmds	N Data	  N Xqts    Message

       Where  site is the name of the site with work, N is a count of each of the three possible types of work (command, data, or remote execute),
       and Message is the current status message for that site as found in the file.

       Included in Message may be the time left before UUCP can re-try the call, and the count of the number of times that UUCP has tried to reach
       the site.  The process id of may also be shown if it is in a TALKING state.

WARNINGS

       Use of commands, including is discouraged because they are targeted for removal from HP-UX.  Use ftp(1) or rcp(1) instead.

AUTHOR

       was developed by the University of California, Berkeley.

SEE ALSO

       uucp(1).

       Tim O'Reilly and Grace Todino,
	      O'Reilly & Associates, Inc. USA.

       Grace Todino and Dale Dougherty,
	      O'Reilly & Associates, Inc. USA.

								  TO BE OBSOLETED							uusnap(1M)

10 More Discussions You Might Find Interesting

1. Windows & DOS: Issues & Discussions

mapping FTP site as local drive

Discussion started by: cerberusofhate

2. SCO

Openserver 5.0.4 can't be ping or telnet into from a remote site

Discussion started by: kayode

3. UNIX for Advanced & Expert Users

Commands to copy a tar.gz file from a Remote Unix Server to Local Desktop.

Discussion started by: marconi

4. Shell Programming and Scripting

Can BASH execute commands on a remote server when the commands are embedded in shell

Discussion started by: bash_in_my_head