While I was reading a Sun SysAdmin Guide, I came across this point...
/etc/vfstab Field Descriptions
mount at boot -
The root (/), /usr and /var file systems are not mounted from the vfstab file initially.
This field should always be set to no for these file systems and for virtual file... (2 Replies)
Hi
can anybody help me when i boot up my machine the LED runs until it gets to 406coch6 and it simply stops their
noting appears on the screen...?
Is their a website that lists all the codes and their meaning
Thanks
Liam (2 Replies)
hi guys,
i have 2 hp-ux servers at my office with flashing system LED.
am very new to hp-ux...no much of access directly to the server.
how can i check for faults relating to this flashing of this system LED?
the DC is pretty far from my office...all i have is an ssh access into the server.... (4 Replies)
When I import VG, it shows:
0516-622 synclvodm: Warning, cannot write lv control block data.
I found AIX V4.3 have updatelv command can recovery LVB from VG, however, updatelv is not existed on AIX 5L, which command to replace it? (2 Replies)
We use HMC to manage two logical partitions. LPARs don't have any problem but HMC's, itself, attention led is on. :eek: I am not sure if that's going to affect LPARs, but just wanted to be sure.... :confused:
Has anyone come across such problem on HMC?
Where can you suggest to look for logs... (1 Reply)
Simple question: on hmc i can use lsrefcode to see led status
of panel,currently display 01 N V=F T
On aix without hmc,is possible to see actual led status of my workstation?
I don't have hmc currently
Thanks (3 Replies)
Hi, I am trying to switch from windows to linux.
I have been using Autohotkey scripts for some little things.
I started writing some bash scripts for NEMO browser in linux mint and I am trying to convert some of AHK scripts but as I am not a programmer. I have a hard time with regex stuff.
... (3 Replies)
Discussion started by: Bishop
3 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)