When you say that it doesn't "see" the second hard disk, what do you mean?
It's been a long time since I used SCO in anger but from what I remember the boot&root floppy set just lands you in a shell where you can start disaster recovery from. With SCO you can boot the O/S once the root filesystem is recovered (and you don't need other filesystems to be there initially; you can recover them afterwards). So you only need access to the first HD.
However, I do remember:
and then manually creating directories under /mnt and mounting other HD based filesystems in order to do a full system restore from tape.
(Have you looked for a /dev/hd1root on the boot&root set???)
hello ,
i have sun sparc machine with sunos2.7 , the machine has a cdrom but no floppy drive , it is networked with windows machine , from where i can use ftp and telnet.
can i use floppy drive of windows machine and create a boot image(of unix) on that drive, using ftp?
thanx
raju (4 Replies)
i installed caldera linux from CD and now without floopy its not booting, how do i write into MBR, uning lilo, i dont have any other OS , so i want to boot into linux always. pls help me out,
thank you. (1 Reply)
Hi,
My dear friends,
I am trying to install red hat linux. I have downloaded its disc1. On the instructions page, the next stage is to make the boot disk, so that I can boot from the floppy. However, I am unable to locate the boot image iso file. I tried on google, but I got a few files which... (3 Replies)
I need to boot an OpenServer 5.0.5 server but I don't have emergency boot disks for it. There are some boot disks of other servers.
Can I use these disks, changing defbootstr ?. How ?.
The fact is that administrator can't login as root and it seems to be a corrupted auth system issue. Other... (2 Replies)
Hello,
I have an AIX 5.1 server. Model : 7029-6E3. The users of this server have forgotted the root password and I am now supposed to reset it. I boot through the AIX 5.1 CD and try to go to the maitenance mode. But I am facing this issue, where, the hard disk does not recognised during this... (1 Reply)
I know how to create the bootable tape image by using emergency_rec, but I could not find any document to instruct me on how to boot off the tape, and detail steps I should go through, for instance, at what point the booting sequency would prompt me to enter bootable path, and what the path is...... (0 Replies)
Hi all,
I'm kind of new to programming in Linux & c/c++. I'm currently writing a FileManager using Ubuntu Linux(10.10) for Learning Purposes. I've got started on this project by creating a loopback device to be used as my virtual hard disk. After creating the loop back hard disk and mounting it... (23 Replies)
We have old SCO Openserver 5.0.5. and its was running out of disk space on root disk - error 142 /2. I tried to move some files to another partition with space, but I ran into issue as I moved /opt/K and /opt/P. Now when the servers boots it fails and goes into debug mode.
I don't have a... (4 Replies)
In my previous thread post (which is also the most recent on this SCO forum), I mentioned that we have an HP DL380G5 server running SCO Unixware 7.11
which has unable to boot with error “FATAL BOOT ERROR: Can't load stage 3”.
..
Unfortunately no media is available for the machine and I think the... (1 Reply)
Discussion started by: BernP
1 Replies
LEARN ABOUT MOJAVE
installgrub
installgrub(1M)installgrub(1M)NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)