Solved: Disk Unable to Boot Post: 302869863

9 More Discussions You Might Find Interesting

1. Solaris

unable to boot from disk1

I had installed solaris 10 on 440 on disk 0. I had done ufsrestore on disk1 from tape and then rebooted Rebooting with command: boot disk1 Boot device: /pci@1f,700000/scsi@2/disk@1,0 File and args: SunOS Release 5.10 Version Generic_118833-24 64-bit Copyright 1983-2006 Sun Microsystems,...

2. Solaris

vxvm root disk booting problem - solved with boot -a. How?

Hi All, We had a Sun Netra T1 go down the other day, the root disk was mirrored using vxvm. Upon boot from either disk, we had the following error appear: WARNING: Error writing ufs log state WARNING: ufs log for / changed state to Error WARNING: Please umount(1M) / and run...

3. Red Hat

Unable to boot Fedora 10

Hello, I have a test PC running Fedora 10. Friday evening it was working fine, I have some perl scripts which are scheduled to run every morning. But when I started work this morning, I found I cannot ping the machine. When I switched on the monitor, I saw the GRUB promt :(. I am not sure...

4. Hardware

[Solved] Boot Lockup After Drive Swap

Hey All, Im using Fedora 2.6 (which is cannot be changed for compatibility reasons). I cloned a drive from a different server and when i added this drive to a new box, during startup it hangs on "Configuring Kernel Parameters:" Is there any way to bypass this process and still boot...

5. Fedora

[Solved] Unable to start Matlab program

hello everyone, I have Matlab installed on Fedora 16. I tried running it by simply typing on terminal: $ matlabBut it returned the follwoing error: --- can anyone suggest a solution? cheers, peter ---------- Post updated at 10:57 PM ---------- Previous update was at 10:54 PM ----------...

6. Solaris

Unable to boot from mirror disk on x86 server configured under VxVM

Hi, Can you help me on booting x86 server configured under VxVM. Server boots fine normally from both the disks but if I try to boot server from mirror disk without starting veritas, then it does not boot. vxplex -g rootdg dis var-02 vxplex -g rootdg dis swapvol-02 vxplex -g rootdg dis...

7. Solaris

How to specify local boot up disk in CD boot Grub?

Hi Solaris 10 Experts, I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk...

8. Solaris

Use 'dd' to copy boot disk to larger target disk

Hi, I'm looking to copy a boot disk on an old Solaris 8 system using dd. I'll bring the system down to single user mode and begin from there. I'm copying my source disk to a larger target disk. Do I need to do anything other than the 'dd' command below because the target disk is bigger? ...

9. Red Hat

Unable to boot up after P2V

Hi, I just P2V an old machine running Redhat 5.5 on a physical server. After P2V was completed, when boot up it got an error. Please refer to the attachment for the error. Please assist. Thanks.

LEARN ABOUT OPENSOLARIS

mkdevmaps

mkdevmaps(1M)						  System Administration Commands					     mkdevmaps(1M)

NAME

       mkdevmaps - make device_maps entries

SYNOPSIS

       /usr/sbin/mkdevmaps

DESCRIPTION

       The  mkdevmaps  command	writes	to standard out a set of device_maps(4) entries describing the system's frame buffer, audio, and removable
       media devices.

       The mkdevmaps command is used by the init.d(4) scripts to create or update the /etc/security/device_maps file.

       Entries are generated based on the device special files found in /dev. For the different  categories  of  devices,  the	mkdevmaps  command
       checks for the following files under /dev:

	 audio		 /dev/audio, /dev/audioctl, /dev/sound/...
	 tape		 /dev/rst*, /dev/nrst*, /dev/rmt/...
	 floppy 	 /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
	 removable disk  /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
	 frame buffer	 /dev/fb

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcsu			   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Obsolete			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       allocate(1), bsmconv(1M), attributes(5)

NOTES

       mkdevmaps might not be supported in a future release of the Solaris operating system.

SunOS 5.11							    8 Oct 2003							     mkdevmaps(1M)