Last time I had a similar issue, we fixed it by issuing a forcelip via luxadm. Some might look at it as if it was a demon but it helped me in the past.
To list the ports:
Then reinitialize the one giving you headache via -e forcelip
But be careful:
Might be worth opening a case with Oracle. Let us know what they recommend or if you give my idea a shot.
hi fren
i am facing this problem
i have sun 6140 storage
30 volumes
bt my vxdisk list output is showing 37 disk
which shd nt b there
has neone faced this proble earlier
vxdiks list output is like this
SUN6140-2_0 auto - - online c4t201700A0B84853C0d2s2
SUN6140-2_1 auto - - online... (13 Replies)
I have a list of LUN ID, my task is to find if disk has been added or not. How do I do that? I have been searching the forum and not able to find answer.
thanks (4 Replies)
Hi,
I have a sun 440, it already has LUN's configured with MPXIO.
I just had more LUNS added, I did devfsadm and cfgadm -al, and they're showing up twice in "Format". :confused:
There are no new fiber cables or HBA's involved, same physical setup, just adding LUNS.
Aren't they... (0 Replies)
When I try to configure my HBA ports on Solaris 10; I cant see any output.
bash-3.2# mpathadm list lu
bash-3.2#
I checked /kernel/drv/fp.conf file.
...
mpxio-disable="no";
...
What shall I check more? what shall I do?
---------- Post updated at 10:18 AM ---------- Previous update was... (0 Replies)
How can i remove LUN's from solaris 10 those are unmapped from SAN?
from storage side i got confirmation that they removed lun. but in my solaris box still it's visible.
i tried below.
root@globalares2.example.com #luxadm -e offline /dev/rdsk/c2t600D02310007D16C42FF09E24B5B8255d0s2... (7 Replies)
Hi
I have a server running solaris 10 in which the NetAppadmin has just presented one LUN of 200Gb, but when running:
bash-3.2# format
Searching for disks...done
c3t500A09828DE3E799d1: configured with capacity of 199.94GB
c3t500A09829DE3E799d1: configured with capacity of 199.94GB
... (5 Replies)
Hi all, I have the following LUN which is showing OK with its two paths:
DEVICE PROPERTIES for disk: /dev/rdsk/c23t500507630A3BC579d123s2
Vendor: IBM
Product ID: 2107900
Revision: 3010
Serial Num: 75WB0114900
Unformatted capacity:... (13 Replies)
Hello,
Looking for some guidance to changing how an AIX 6.1 server sees its luns. Presently they're connected via 1GB iscsi but I want to change it to 4GB fiber channel. Anyone done this before and if so is it an easy step?
I'm thinking this can be done in this order:
unmount the... (5 Replies)
We are using Solaris 11 Logical Domains. We NFS share a disk backup area from one LDom to other servers. The share is on a single 1.5 Tb LUN presented to the Control Domain, and as a virtual disk on the NFS server LDom. A 1.5 Tb zpool has been created on the LDom. We now need to provide more disk... (2 Replies)
Discussion started by: SallyB
2 Replies
LEARN ABOUT OSX
mpioutil
mpioutil(1) BSD General Commands Manual mpioutil(1)NAME
mpioutil -- Tool for configuring paths to multipathed logical units.
SYNOPSIS
mpioutil verb direct-object arguments
DESCRIPTION
mpioutil is a utility to manage multiple paths to a SCSI Logical Unit.
VERBS, DIRECT OBJECTS, AND SPECIFIC ARGUMENTS
list
Lists all multipathed logical units.
info -i <lun identifier>
Get information on a multipathed logical unit. The -i flag may also be expressed as --id.
modify lun -i <lun identifier> -a <load balancing algorithm> -b <round robin batch count>
Modify a logical unit. The -i, -a, -b flags may also be expressed as --id, --algorithm, and --batchCount respectively.
modify path -l <lun identifier> -i <path identifier> -e | -d
Modify a path on a logical unit. The -l, -i, -e, and -d flags may also be expressed as --lun, --id, --enable, and --disable respec-
tively.
EXAMPLES
mpioutil list
Lists all multipathed logical units.
mpioutil info --id 22F2000155A508ED
Get information for a multipathed lun with id 22F2000155A508ED.
mpioutil modify lun --id 22F2000155A508ED --algorithm RoundRobin --batchCount 16
Modify a multipathed lun's algorithm to be RoundRobin with a batch count of 16.
mpioutil modify lun --id 22F2000155A508ED --algorithm LeastIO
Modify a multipathed lun's algorithm to be LeastIO.
mpioutil modify path --lun 22F2000155A508ED --id 26010001553560BF00000001 --disable
Disable a path that belongs to a multipathed logical unit.
Darwin June 2, 2019 Darwin