10-30-2013
But still, the basic question is: 60% of what? entitlement?
The real question is how much physical processor is it using (1.0, or 0.05). AIX will say 60% (e.g., user% plus sys%) for both - but it would mean 0.6 CPU, or 0.03 CPU, physically.
Which processor - SMT2/SMT4 - etc., etc..
This User Gave Thanks to MichaelFelt For This Post:
8 More Discussions You Might Find Interesting
1. AIX
Is it necessary to put system into single user mode for applying aix 5.3 TL8 on a aix 5.3.5.0 system ?
Is the TL8 installation not totally safe ?
thank you. (6 Replies)
Discussion started by: astjen
6 Replies
2. AIX
Hi,
redbook documentation is telling that IY17981 fix is required for aix 4.3.3 to aix 5L migration. But there is no mention about that fix in any ML installation packages.
- My system is ML11 :
oslevel –r
4330-11
- But xlC.rte is on wrong version :
lslpp -L xlC.rte
xlC.rte ... (3 Replies)
Discussion started by: astjen
3 Replies
3. AIX
Steps to upgrade AIX TL ( technology Level ) / Maintenance Level in AIX ( including Firmware HMC VIOS )
This article or post covers upgrades for
- Hardware Management Console ( HMC )
- Firmware ( also known as microcode )
- VIO ( Virtual I/O Server = PowerVM )
- AIX Version, Technology... (2 Replies)
Discussion started by: filosophizer
2 Replies
4. AIX
How could we derive teh Next month in MON-RR format from current date ie sysdate in UNI AIX sheel script.I coould get a command but i supports only inLinux susse andnotin AIX.
I need for Unix AIX.Pls Help.
Regards
Shiv (2 Replies)
Discussion started by: SHIV75
2 Replies
5. AIX
Using nimadm:
nimadm -j nimadmvg -c sap024 -s spot_6100 -l lpp_6100 -d "hdisk1" -Y
Initializing the NIM master.
Initializing NIM client sap024.
0505-205 nimadm: The level of bos.alt_disk_install.rte installed in SPOT
spot_6100 (6.1.3.4) does not match the NIM master's level (7.1.1.2).... (2 Replies)
Discussion started by: sciacca75
2 Replies
6. AIX
Hi all,
I am trying to exchange hostname and IP address of two AIX machines.
But i am confused as how to change it ?
do i need to use "smitty mktcpip" or "smitty tcpip" ?
what is the difference between smitty mktcpip and smitty tcpip ?
Also anymore steps to follow or just updating... (3 Replies)
Discussion started by: lramsb4u
3 Replies
7. AIX
Hello,
I've set up email alerts on AIX Servers. so that i can get email notifications (via mail relay server) when ever there is abnormal behavior.
for example
1) my script monitors CPU/disk/memory etc... when it reaches high water ark, it will send an email alert.
2) disk usage alerts
3)... (5 Replies)
Discussion started by: System Admin 77
5 Replies
8. AIX
I am running AIX 7.1 and currently we have samba 3.6.25 installed on the server. As it stands some AIX folders are shared that can be accessed by certain Windows users.
The problem is that since Windows 10 the guest feature no longer works so users have to manually type in their Windows login/pwd... (14 Replies)
Discussion started by: linuxsnake
14 Replies
CYC(3) Library Functions Manual CYC(3)
NAME
cyc - Cyclone fiber interface
SYNOPSIS
bind #C /dev
/dev/cyc
DESCRIPTION
The cyc device drives the Cyclone CVME961 (not 960) card with an attached SQFBR Squall module to provide a high-speed point-to-point 9P
link between a CPU server and a file server. Both machines must of course have VME buses. For debugging, the Cyclone may be loaded with
on-board software using xms (see con(1)) and the NINDY ROM supplied with the device. In production, though, it is easiest to replace the
ROM with the program in the directory /sys/src/fs/cyc. In either case, the on-board software expects an identical Cyclone to be at the
other end of the fiber. One of the boards must be in a CPU server, the other in a file server; the systems configure their respective
boards dynamically as appropriate.
The driver serves a single file, /dev/cyc. When opened, the file initializes the connection to the file server. The resulting file
descriptor should be used only to send and receive 9P messages. Typically boot(8) will open /dev/cyc, prime the connection by sending nop
and session messages (see attach(5)), and then mount (see bind(2)) the file descriptor in the CPU server's name space. Thenceforth all
activity on /dev/cyc will be mediated by the mount driver mnt(3)).
FILES
/sys/src/fs/cyc
Directory of on-board software for the Cyclone.
SEE ALSO
CVME960, CVM961 Single Board Computer User's Manual and SQFBR User's Manual, Cyclone Microsystems, Inc., New Haven, CT, 1-203-7865536
SOURCE
/sys/src/9/power/devcyc.c
BUGS
The driver is specific to the SGI Power Series, although the device should operate on any VME bus.
CYC(3)