Reboot required on Server, Just confirm my settings.
Hi Guys,
I need to reboot one Server as the newly inserted disk is not getting detected in system , I have also confirmed with Sun Support and finally it was the reboot which was required after doing all troubleshooting stuff.
So I have disassembled the mirror and kept working disk's single slices etry in /etc/vfstab as follows:
Code:
#########################################################################
# device device mount FS fsck mount mount #
# to mount to fsck point type pass at boot options #
/proc - /proc proc - no -
fd - /dev/fd fd - no -
swap - /tmp tmpfs - yes -
#
#/dev/md/dsk/d1 - - swap - no -
#
#/dev/md/dsk/d0 /dev/md/rdsk/d0 / ufs 1 no -
#/dev/md/dsk/d4 /dev/md/rdsk/d4 /var ufs 1 yes -
#live-upgrade:<Tue Oct 6 13:10:13 CEST 2009>:<Sol10># /dev/md/dsk/d1 /dev/md/rdsk/d1 /var ufs 1 no -
#/dev/md/dsk/d3 /dev/md/rdsk/d3 /u01 ufs 2 yes -
/dev/dsk/c1t1d0s1 - - swap - no -
/dev/dsk/c1t1d0s0 /dev/rdsk/c1t1d0s0 / ufs 1 no -
/dev/dsk/c1t1d0s4 /dev/rdsk/c1t1d0s4 /var ufs 1 yes -
/dev/dsk/c1t1d0s3 /dev/rdsk/c1t1d0s3 /u01 ufs 2 yes -
-bash-3.00$
given any specific fix, how can I determine if the machine will require a reboot? (I don't have a window for downtime)
obvious fix's to the kernel / lvm will require a reboot ... bos.rte files etc...
is there a tool or command that I am able to run against a specific IY that will inform me... (4 Replies)
Hi
i have created a solaris zone but have not yet connected any network cables for this new zone,
can i set the zone up without running the command 'add net' and not adding an ip or physical interface?
i tried to add dummy internet settings and get this
zonecfg:coddr> add net... (4 Replies)
Hi All,
I want to login to CVS using terminal. I am executing the following command in the terminal :-
export CVSROOT=: pserver:ags_rd@istcvs.corp.apple.com:/istcvs/CVSHOME
cvs login
But i get the following error :
Afreens-iMac:buildTest Afreen$ export CVSROOT=:... (3 Replies)
Hi All,
I want to login to CVS using terminal. I am executing the following command in the terminal :-
export CVSROOT=: pserver:ags_rd@istcvs.corp.apple.com:/istcvs/CVSHOME
cvs login
But i get the following error :
Afreens-iMac:buildTest Afreen$ export CVSROOT=:... (1 Reply)
Dear Friends
I run my website "www.egully.com" on a dedicated server with a config of memory 8GB and 8GB RAM
the CPU load average often shoots from 2-3 to 20-30 and the site becomes extremely slow. On investigation we found a lot of temporary mysql tables are been created which is taking up lot... (0 Replies)
I am using putty to conect various unix/solais/hp boxes...
The font size appear in the putty are very small and the black background and white text is very usual ...
I want to change the size of the text appear to som ewhat bigger and text color to change green and cursor appearence to... (2 Replies)
On my Solaris box I have to reboot some devices like below.
However I think this can be done through a script. I've create a list that contains the devices IP addresses.
Here's the logic:
Reboot 4 devices and sleep for 5mins(300s.) While the devices are rebooting, I would like to confirm... (9 Replies)
Hello,
I am trying to perform Suse 10 SP3 installation via network in 6 Sun Fire 4270 M2 servers.
The problem is that even if i set first prio boot device the hard disk the system always try to boot from network.And after the first restart the BIOS setting has been lost(and PXE come first... (2 Replies)
Hi,
anyone please let us know how to write shell script to find the missing mountpoints after server reboot.
i want to take the mountpount information before server reboot, and validate the mountpoints after server reboot if any missing.please let us know the shell script from begining to end as... (24 Replies)
Hi,
The server got rebooted and below messages can be seen in /var/log/messages
Sep 7 10:49:12 minersville kernel: Call Trace: <IRQ> <ffffffff80167420>{__alloc_pages+796}
Sep 7 10:49:12 minersville kernel: <ffffffff80182814>{kmem_getpages+106} <ffffffff80183c16>{fallback_alloc+304}... (3 Replies)
Discussion started by: admin_db
3 Replies
LEARN ABOUT BSD
reboot
REBOOT(8) System Manager's Manual REBOOT(8)NAME
reboot - stopping and restarting the system
SYNOPSIS
/sbin/reboot [ -lqnhdarsfRD ]
/sbin/halt [ -lqndars ]
/sbin/fastboot [ -lqndarsRD ]
DESCRIPTION
2.11BSD is started by placing it in memory at location zero and transferring to its entry point. Since the system is not reentrant, it is
necessary to read it in from disk or tape each time it is to be boot strapped.
Rebooting a running system: When the system is running and a reboot is desired, shutdown(8) is normally used to stop time sharing and put
the system into single user mode. If there are no users then /sbin/reboot can be used without shutting the system down first.
Reboot normally causes the disks to be synced and allows the system to perform other shutdown activities such as resynchronizing hardware
time-of-day clocks. A multi-user reboot (as described below) is then initiated. This causes a system to be booted and an automatic disk
check to be performed. If all this succeeds without incident, the system is then brought up for multi-user operation.
Options to reboot are:
-l Don't try to tell syslogd(8) what's about to happen.
-q Reboot quickly and ungracefully, without shutting down running processes first.
-n Don't sync before rebooting. This can be used if a disk or the processor is on fire.
-h Don't reboot, simply halt the processor.
-d Dump memory onto the dump device, usually part of swap, before rebooting. The dump is done in the same way as after a panic.
-a Have the system booter ask for the name of the system to be booted, rather than immediately booting the default system (/unix).
-r Mount the root file system as read only when the system reboots. This is not supported by the kernel in 2.11BSD.
-s Don't enter multi-user mode after system has rebooted - stay in single user mode.
-f Fast reboot. Omit the automatic file system consistency check when the system reboots and goes multi-user. This is accomplished by
passing a fast reboot flag on to the rebooting kernel. This currently prevents the use of -f flag in conjunction with the -h (halt)
flag.
-D Set the autoconfig(8) debug flag. This is normally not used unless one is debugging the autoconfig program.
-R Tells the kernel to use the compiled in root device. Normally the system uses the device from which it was booted as the
root/swap/pipe/dump device.
Reboot normally places a shutdown record in the login accounting file /usr/adm/wtmp. This is inhibited if the -q or -n options are
present. Note that the -f (fast reboot) and -n (don't sync) options are contradictory; the request for a fast reboot is ignored in this
case.
Halt and fastboot are synonymous with ``reboot -h'' and ``reboot -f'', respectively.
Power fail and crash recovery: Normally, the system will reboot itself at power-up or after crashes if the contents of low memory are
intact. An automatic consistency check of the file systems will be performed, and unless this fails, the system will resume multi-user
operations.
SEE ALSO autoconfig(8), sync(2), utmp(8), shutdown(8), syslogd(8)3rd Berkeley Distribution May 24, 1996 REBOOT(8)