Hi hicksd8, it's never too late!
I did the cold start up and the
did not return any thing it just moved to the next ok> prompt.
however still freezes the system.
And the system freezes there.
There is no slot for the cdrom, I am not sure why it keeps coming up.
I did
still not change.
Any suggestions? Thank you.
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Hi i need help pls ...
Server type sun fire 3800 I need to install solaris 9 .
When i boot the system i recieve the following :
System Controller 'sunfire3800':
Type 0 for Platform Shell
Type 1 for domain A console
Type 2 for domain B console
Type 3 for... (5 Replies)
I have a real emergency. I have a Sun Fire V240 UltraSparc server and am connected via the Serial Mgmnt Port with a Laptop. I have been building an Oracle database on it for the past couple months, not getting very far along with it , when suddenly, the system had a fatal crash. I've lost the... (2 Replies)
hi all:
I have a sun blade-1000 for labs only, with 73G hd loaded, which boot block installed on slice 0. I'm confused by setting "boot-device" value in obp, which my question as follow:
in ok mode, I got device alias like this:
disk0: /pci@8,600000/SUNW,qlc@4/fp@0,0/disk@2,0
as I know the... (4 Replies)
Hello,
I have kubuntu on my laptop and now I decided to switch to Windows 7. I made the bios settings properly (first choice is boot from cd\vd) but I see the error
" reboot and select proper Boot device or insert Boot media in select Boot device and press a key "
I have tried CD and... (0 Replies)
I've a Sun V440 machine, and it's running solaris 10 .. for some reason i need to install a fresh copy of solaris 10. for that i've prepared solaris 10 dvd but surprisingly i found there is no any dvd rom on this machine, so i've took a dvd rom from a V240 machine and inserted on V440.
after... (3 Replies)
I installed a new hard drive completely blank.
sun blade 150
openboot 4.10.6
message:
Boot device: disk:a File and args:
Bad magic number in disk label
Can't open label package
Evaluating:
Can't open boot device (15 Replies)
Hi,
Unable to make tape backup, please help.
/opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00
* Creating local directories for configuration files and archive.
======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery.
(Mon... (4 Replies)
Hi there,
I am trying to determine if a specific XIV LUN on AIX is in OPEN or CLOSED state. I would like tthe same info as I can get from pcmpath command on v7000 LUN-s. I would need this info to find out if I can safely delete a LUN or not.
I tried fuser command, but no luck. It did not... (6 Replies)
Discussion started by: trifo75
6 Replies
LEARN ABOUT FREEBSD
boot.config
BOOT.CONFIG(5) BSD File Formats Manual BOOT.CONFIG(5)NAME
boot.config -- Configuration file for the boot blocks
DESCRIPTION
The boot.config file contains options for the FreeBSD boot block code.
When the FreeBSD boot loader runs, it searches the ``a'' slice of the boot partition for a boot.config file (as a result, slices which are
missing an ``a'' partition require user intervention during the boot process). If the boot.config file is found, its contents are used as
the default configuration options for the boot block code and are echoed to the system console.
A valid format of this file is to put BIOS drive number, a controller type, a unit number, a partition, a kernel file name, and any other
valid boot(8) option on a single line, as it is done at the ``boot:'' prompt.
The options related to the boot image selection described below and all the other options available for boot.config are documented in detail
in the boot(8) manual page.
FILES
/boot.config parameters for the boot blocks (optional)
EXAMPLES
The command:
# echo "-P" > /boot.config
will activate the serial console of FreeBSD.
The command:
# echo "1:ad(1,a)/boot/loader" > /boot.config
will instruct the second stage of boot(8) on the first disk to boot with the third boot(8) stage from the second disk.
The command:
# echo "1:ad(1,a)/boot/loader -P" > /boot.config
will do both of the above.
SEE ALSO boot(8), loader(8)AUTHORS
This manual page was written by Daniel Gerzo <danger@FreeBSD.org>.
BSD May 13, 2007 BSD