Now I have a good mirror in place. Now the question is that when I try to boot the system using the New Hard disk /dev/sda from the BIOS, it comes to halt and nothing shows up except blinking cursor on blank screen and I have to reboot the system to select the /dev/sdb disk to boot from. This is happening for the normal reboot as well, in such a way that i have to select the disk manually everytime the system is rebooted.
Can someone please guide how the other disk can be grub-recorgnized and how I can make a seamless reboot..
Below is the output from mdadmin --detail command
Code:
mdadm --detail /dev/md{1..3}
/dev/md1:
Version : 1.2
Creation Time : Wed Jun 5 19:02:13 2013
Raid Level : raid1
Array Size : 19514240 (18.61 GiB 19.98 GB)
Used Dev Size : 19514240 (18.61 GiB 19.98 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Sun Oct 6 01:00:02 2013
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : busyboy:1 (local to host busyboy)
UUID : 24d0bec2:c86a4b42:2551491c:ce21cac7
Events : 50
Number Major Minor RaidDevice State
0 8 18 0 active sync /dev/sdb2
2 8 2 1 active sync /dev/sda2
/dev/md2:
Version : 1.2
Creation Time : Wed Jun 5 19:20:37 2013
Raid Level : raid1
Array Size : 488149824 (465.54 GiB 499.87 GB)
Used Dev Size : 488149824 (465.54 GiB 499.87 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Thu Oct 10 13:47:44 2013
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : busyboy:2 (local to host busyboy)
UUID : ab235953:879428e8:d46af252:13ed66d3
Events : 399197
Number Major Minor RaidDevice State
0 8 19 0 active sync /dev/sdb3
2 8 3 1 active sync /dev/sda3
/dev/md3:
Version : 1.2
Creation Time : Wed Jun 5 19:20:48 2013
Raid Level : raid1
Array Size : 2422320960 (2310.11 GiB 2480.46 GB)
Used Dev Size : 2422320960 (2310.11 GiB 2480.46 GB)
Raid Devices : 2
Total Devices : 2
Persistence : Superblock is persistent
Update Time : Thu Oct 10 13:47:46 2013
State : clean
Active Devices : 2
Working Devices : 2
Failed Devices : 0
Spare Devices : 0
Name : busyboy:3 (local to host busyboy)
UUID : 2a22160c:72b4f201:de0acb10:79566f08
Events : 717493
Number Major Minor RaidDevice State
0 8 20 0 active sync /dev/sdb4
2 8 4 1 active sync /dev/sda4
I'm setting-up my new computer, and would like to try out and switch between several OS (mostly different Linux distros). As I prefer to use separate partition for various dirs (/, home, usr, var, opt and perhaps local), I've come to the conclution that I'll run-out of partitions too soon, so I've... (1 Reply)
Hi people,I am trying to install Debian Lenny Betta-2 on a system that has the built in promise chip for "Raid 0" but when I finished the install and then I reboot ,I get "grub loading,pleas wate... Error 2.
also the Debian Lenny Betta-2 is identifying both drives ,instead of a singular drive... (4 Replies)
We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks.
OS--AIX 5.3 (1 Reply)
All
I am trying to get RHEL 5.4 to load to the XEN enabled kernel but I am not having much luck. My grub.conf looks like it has 2.6.18-194.11.3.el5xen as the 1st one but when I do a uname -a I get the NON xen enabled kernel. I know I am doing something stupid but if anybody has any... (1 Reply)
Hi,
I`m on SunFire480R with Solaris 10. Disk in rootdg group failed, so it was replaced. However, I cannot make Veritas initalise the replaced disk:
# vxdctl enable
# vxdisk list c1t0d0s2
Device: c1t0d0s2
devicetag: c1t0d0
type: auto
flags: online error private autoconfig... (1 Reply)
Hi,
a little while ago, one of the GPT Partitioned hard disk had gone faulty in a Mirror RAID and is now successfully replaced.
here is how I did that.
1) created identical partition table on the new disk.
2) attached the mirrors using md commands.
The whole procedure is given below:... (2 Replies)
Scenario1:
VG00 lvm,not mirrored,2 disk of 36GB vg size
VG00 size is under 30G.
Is possible to remove a disk of 36GB and replace "on fly"
with a disk of 300GB on VG00?
Thanks (6 Replies)
I am having trouble with LVM and one of my physical volumes.
Using Ubuntu Desktop 14.04
I was trying to set up LVM across two disks (not containing the OS or Home).
First I created the initial Physical Volume, the Volume Group, and the Logical volume, and everything seemed fine. The... (2 Replies)
OSLevel: 5300-10-02-0943
System Model: IBM,8203-E4A
Power 6
==
Hi!
I replaced a failed pdisk in the raid enclosure as follows,
- rmdev -l 'pdisk18' '-d'
- Replaced it.
- cfgmgr (detected)
- I can see the new drive, with the correct serial #
lscfg -v -l pdisk18
pdisk18... (2 Replies)