Hi folks,
The server time is no tgetiing synched up with the NTP server.
I tried ntpdate -u <ipadress> this is not working. please help out.
regards,
Sag. (7 Replies)
Ok, I have 4 production systems. There is one NTP server for all four systems. In each system there is one Solaris 10 box that points to that NTP server. All of the other machines in the system point to the Solaris 10 machine to get their time sync.
All four Solaris 10 machines have essentially... (2 Replies)
Hi,
My Linux VMs are running on citrix XEN.Somehow the time drift is too high (going very fast). Even if the correct time configured using date -s command, for every 1 hr it is differing almost 5 - 10 mins.
Tried configuring ntpd (local NTP server) and still it is not synchronized.
Machine... (2 Replies)
Hi folks, I have developed a Linux server for my customer. After migrating the server to my customer site, I was trying to sync its time to the NTP time servers at my customer site.
Below is the ntp.conf:
% vi /etc/ntp.conf
# Permit time synchronization with our time source, but do not
# permit... (2 Replies)
Hi All,
I deployed the rhel7 server in the bare metal hardware. I want to configure the rhel7 server to sync time with bios. I tired the below commands. Still it did not sync the time with bios.
Thanks,
Kalai (3 Replies)
Hi
I have a requirement to rsync from remote to local machine via ssh and sync files that are changed in last n hours.
pgrep to check if no other sync is running
pgrep -f rsync.*/opt > /dev/null || rsync --bwlimit=10000 -avz --delete root@X.X.X.X:/var/source/ /opt/dest/ >> /home/log 2>&1... (0 Replies)
Hello,
We have Windows 10 machine connected to Sparc T5440 server via serial cable.
We access the server from the Windows 10 machine using putty via serial connection. This allows us to access ILOM and Unix.
We have recently noticed that whenever we reboot the windows machine (Windows 10),... (11 Replies)
Discussion started by: jasonu
11 Replies
LEARN ABOUT FREEBSD
sync
SYNC(8) BSD System Manager's Manual SYNC(8)NAME
sync -- force completion of pending disk writes (flush cache)
SYNOPSIS
sync
DESCRIPTION
The sync utility can be called to ensure that all disk writes have been completed before the processor is halted in a way not suitably done
by reboot(8) or halt(8). Generally, it is preferable to use reboot(8) or halt(8) to shut down the system, as they may perform additional
actions such as resynchronizing the hardware clock and flushing internal caches before performing a final sync.
The sync utility utilizes the sync(2) function call.
SEE ALSO fsync(2), sync(2), syncer(4), halt(8), reboot(8)HISTORY
A sync utility appeared in Version 4 AT&T UNIX.
BSD May 31, 1993 BSD