while I can ping 173.194.38.128 (which is actually google.com), I cannot ping google.com
why is this so?
Because you configured your network manually but didn't know the all correct parameters.
You likely didn't configured your Windows 7 host networking but simply let the OS do the configuration itself. Just do the same with your Solaris guest, i.e. don't select the "DefaultFixed" profile but the "Automatic" one with this command:
Hi,
I am trying to configure Solaris 10 for Internet Connection.
I have a PC (Celeron 1.7Ghz, 512 MB RAM, Gigabyte 8LD Motherboard).
The Wireless Telephone Specs are:
TATA Indicom Walky.
Further product details are as follows ( I did not understand most of what it says. I have
given... (0 Replies)
Hi,
I am trying to configure Solaris 10 for Internet Connection.
I have a PC (Celeron 1.7Ghz, 512 MB RAM, Gigabyte 8LD Motherboard).
The Wireless Telephone Specs are:
TATA Indicom Walky.
Further product details are as follows ( I did not understand most of what it says. I have given it... (0 Replies)
Hi, I have Solaris 10 running in VMware on a winxp box so I can learn unix. I can 'ping' all the boxes on our network and yahoo.com (but only if I use the IP address I get back from pinging from an xp box). The error message from the terminal window is unknown host and from a browser www.sun.com... (2 Replies)
Hi
Good Day, i would like to ask for further info about my problems experiencing this evening. Im a PPP0 connection in the internet using 3G located in asia pacific region.i had this problem this evening in my INTERNET connections that there are some sites i can't open example ( Gizmodo.com,... (2 Replies)
I have a host os Windows 7 ultimate in place where virtual box is installed.
Now in virtual box I have installed solaris 10.
There is internet connection present in host windows 7 still I am not able to access internet in solaris 10.
Please help to configure solaris so that internet can be... (12 Replies)
Hello,
I have a Solaris 10 x86 VM and I am trying to access the Solaris install menu.
I have the ISO set to connect on startup, and I can see that it is mounted in my system. But when I power on the VM, the GRUB menu comes up and I only have the option of booting Solaris.
Also I have... (4 Replies)
Hi Team,
I have few questions.
Could anyone of you please assist me in this:
============================================
1 : a small shell script to get time from internet using curl, ( Say T1 )
2 : Wait for Random interval of time between 30 sec to 1 min, and get time again.
3 : Keep... (1 Reply)
Hello, I am attempting to use the HTTP/DAV module in perl, and I have a script that transfers files to a website. However, I get the following error message:
"Couldn't open https://www.thisismyurl.com/DAV:
The URL "https://www.thisismyurl.com/DAV" is not DAV enabled or not accessible."
... (0 Replies)
Hey folks,
I've setup a wifi guest network on an E2500 router running TomatoUSB, that I only want to have internet access provided for.
Did this by creating a separate bridge (br1), then putting it in it's own VLAN, created a virtual wifi interface, then set some firewall rules to isolate... (0 Replies)
Hello, I installed FreeBSD 10.3 on AQEMU. I can't connect to internet in none
of the modes of "Default, User-Mode Networking" and "TUN/TAP Networking".
I am able to ping my host in the TAP networking mode (192.168.1.33 which is my
IP addr in guest), but getting 'no route to host' for any... (1 Reply)
Discussion started by: temp-usr
1 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)