Problem migrating disk attached to the same vg (lvm)
Hi,
I'm trying to migrate the content of disk 'A' to disk 'B', that they belong to the same vg 'data'_vg'. Whe using pvmove, I get the following error: 'device-mapper: suspend ioctl failed: Interrupted system call'. I put down the whole trace:
Hiya,
Is there a known method from converting LVM data to VxVM data..
ie we have a load of local and SAN (HPDM) mounts on RHEL 4u5/5u1 servers which are now required to be clustered with SFS (VxFS,VxVM,CFS,VCS etc)
I've come across the vxvmconvert, but thought that was HP-UX only?
Many... (0 Replies)
Hiya,
Is there a known method from converting LVM data to VxVM data..
ie we have a load of local and SAN (HPDM) mounts on RHEL 4u5/5u1 servers which are now required to be clustered with SFS (VxFS,VxVM,CFS,VCS etc)
I've come across the vxvmconvert, but thought that was HP-UX only?
Many... (3 Replies)
We have a filesystem which contains 8 hard disks but i am facing disk I/O issue becuase data is not spreading across all the disks.Is there any way i can check how data is spreading and any parameter we need to change to spread ata across all disks.
OS--AIX 5.3 (1 Reply)
Requirement to remove a faulty mirrored disk from hp-ux LVM
<root@pdwp1s>/etc # vgdisplay -v /dev/vg00
vgdisplay: Warning: couldn't query physical volume "/dev/dsk/c2t0d0":
The specified path does not correspond to physical volume attached to
this volume group
vgdisplay: Warning: couldn't... (9 Replies)
hi!:)
i got a problem....:wall::wall:
i got several disks in my diskarray. I attached new disk to allocate it to the swap space.
The problem is : how to recognise the newly attached disk?
I've one more requirement -:wall:- i want to run dns service on another port number.how can i do... (2 Replies)
Hi guys,
I would like to ask your opinion about my theory, how to fix my broken LVM without risking any data loss.
I use Archlinux at home. I just love this distro, even it gives me a lots of work (particularly after system updates).
Basic system spec:
AMD FX(tm)-6100 Six-Core Processor... (1 Reply)
Scenario1:
VG00 lvm,not mirrored,2 disk of 36GB vg size
VG00 size is under 30G.
Is possible to remove a disk of 36GB and replace "on fly"
with a disk of 300GB on VG00?
Thanks (6 Replies)
My project: i want to migrate from a vg00(actual 75GB disk) to a new vg01 (300GB disk),hpux is 11.31 on itanium efi system.
vg00 is disk0
vg01 is disk8
I did this
#check disk dimension
diskinfo -b /dev/rdisk/disk0_p2 | awk '{print $1/1024}'
#create a part file
vi /tmp/partition
3
EFI... (0 Replies)
I am working on VM host and collecting data to identify the type of storage attached to the server which will be migrated to VNX.
it has one ldom created on it
luxadm probe output ---
No Network Array enclosures found in /dev/es
Found Fibre Channel device(s):
Node... (7 Replies)
Discussion started by: kpatel786
7 Replies
LEARN ABOUT OPENDARWIN
hdio
hdio(7I) Ioctl Requests hdio(7I)NAME
hdio - SMD and IPI disk control operations
SYNOPSIS
#include <sys/hdio.h>
DESCRIPTION
Note - The SMC and IPI drivers have been discontinued. dkio(7I) is now the preferred method for retrieving disk information.
The SMD and IPI disk drivers supplied with this release support a set of ioctl(2) requests for diagnostics and bad sector information.
Basic to these ioctl() requests are the definitions in <sys/hdio.h>.
IOCTLS
HDKIOCGTYPE The argument is a pointer to a hdk_type structure (described below). This ioctl() gets specific information from the hard
disk.
HDKIOCSTYPE The argument is a pointer to a hdk_type structure (described below). This ioctl() sets specific information about the hard
disk.
/*
* Used for drive info
*/
struct hdk_type {
ushort_t hdkt_hsect; /* hard sector count (read only) */
ushort_t hdkt_promrev; /* prom revision (read only) */
uchar_t hdkt_drtype; /* drive type (ctlr specific) */
uchar_t hdkt_drstat; /* drive status (ctlr specific, ro) */
};
HDKIOCGBAD The argument is a pointer to a hdk_badmap structure (described below). This ioctl() is used to get the bad sector map from
the disk.
HDKIOCSBAD The argument is a pointer to a hdk_badmap structure (described below). This ioctl() is used to set the bad sector map on
the disk.
/*
* Used for bad sector map
*/
struct hdk_badmap {
caddr_t hdkb_bufaddr; /* address of user's map buffer */
};
HDKIOCGDIAG The argument is a pointer to a hdk_diag structure (described below). This ioctl() gets the most recent command that failed
along with the sector and error number from the hard disk.
/*
* Used for disk diagnostics
*/
struct hdk_diag {
ushort_t hdkd_errcmd; /* most recent command in error */
daddr_t hdkd_errsect; /* most recent sector in error */
uchar_t hdkd_errno; /* most recent error number */
uchar_t hdkd_severe; /* severity of most recent error */
};
SEE ALSO ioctl(2), dkio(7I)SunOS 5.10 13 Aug 2002 hdio(7I)