I would improve
by
I.e. the following command is only run if the cd was successful.
Further I am not used to the construct in your for loop, and would use simple shell code instead:
At least have each $variable in quotes when used in command arguments!
--
If you need additional debugging tools, like tusc/truss and tcpdump:
simply download them from hpux.connect.org.uk. Do not forget to also download the run-time-dependent packages (e.g. libpcap and openssl are required by tcpdump).
Hi
I faced a problem while booting linux which is as follows;-
*************************************************
Inode 146180 has illegal block(s)
xauth:error in locking authority file /home/root/.Xauthority
Fatal Server Error:
Could not create lock file in /tmp/tXo-lock
... (1 Reply)
Our SUn Solaris Server has crashed second time in 2 days, reason is not known , we are trying to determine what could have gone wrong, any ideas, the power supply seems to be fine, there is no response from keyboard,monitor etc and we had to do a hot boot yesterday..
Any suggestions what could be... (9 Replies)
We have had a server (Solaris 2.6) hardisk crash. When booting the server we get:
ok> boot -S
Boot Device: /sbus/espdmc@e, 8400000/esp@e,8800000/sd@0,0
short read 0x2000 chars read
disk read error
The only way we can get into the console is to
ok> boot cdrom
whereby everything (e.g.... (3 Replies)
Hi guys,
I have one problem.
I need collect the list files along with the file permissions in all directories in one server.
Is their any easy way to collect using any commands or any scripts?
Advance Thanks
:) (2 Replies)
Hi there.
Well i have a really bad problem with my server:
UnixWare Version 5 Release 7
The system crash :wall: and show the error:
Panic: Kernel-mode address fault on user address 0x00000004 :eek:
If anyone knows about the reason of this error please give me a help
Sorry by my english.... (3 Replies)
there are 200 files named file1_0.pdb,file1_60.pdb etc....it looks like:
ATOM 1 N VAL 1 8.897 -21.545 -7.276 1.00 0.00
ATOM 2 H1 VAL 1 9.692 -22.015 -6.868 1.00 0.00
ATOM 3 H2 VAL 1 9.228 -20.766 -7.827 1.00 0.00
ATOM 4 H3 ... (5 Replies)
Hi,
I have script1.sh on 3 servers. I want to collect output report generated by them to a single server and append all the reports. Please tell me how can i do this? (2 Replies)
I want to use case statement to find the range of missing sequence in my directory which it has some few ( dat & DAT ) files
my directory /home/arm/my_folder/20130428 contains :
f01_201304280000.DAT
f01_201304280001.DAT
f01_201304280003.DAT
f02_201304280000.dat
f02_201304280002.dat... (2 Replies)
I have to fetch files from a location hour wise.
Eg files available at location /tmp/data/ are
A20140205.1300-1315......
.
.
A20140205.1400-1415......
.
.
A20140205.1700-1715......
.
.
.
.
Below is the code I have prepared.
But it works only for one hour.
For instance... (1 Reply)
Discussion started by: Saidul
1 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)