I setup ddclient to automatically update my IP - it checks it every five minutes.
It appears that my ISP changes my IP for me almost daily (once per day). I don't know why it does that - my computer is always online. But, it gets changed every night around 1 am.
As to the second question. I don't really know how it's set up. MTA = mail transfer agent? I thought that's what Postfix was? The server is not setup as a domain, e. g. the hostname is not the domain name.
I have not setup a dns server, would that help? If so, I can try it. I didn't know if I needed to set that up as well.
---------- Post updated at 08:49 AM ---------- Previous update was at 05:12 AM ----------
at a minimum, this is a problem I am working through...chug chug, little train that could =)
Transcript of session follows.
Moderator's Comments:
edit by bakunin: please use CODE-tags for output like this. Thank you.
i'm setting up a solaris 9 box to be my home network's DNS server. actually it's up and running, but it's set as a caching-only name server.
can i set it up to be the primary name server? what are the advantages if i can set it up to be a primary name server vs. a caching only name server? (3 Replies)
hi,
i m working on a perl cgi script which uploads a file to the server. i m stuck. i hav written the errors.
plz help.
Sachin Kaw
______________________________________________________________________
#!/usr/bin/perl -w
use CGI;
use CGI qw(:standard);
use strict;
use POSIX... (4 Replies)
Did anyone got Email-2.5.1 working on Sco 5? It goes thru
./configure
with no problem
but bump into an error message when use
make
I am including the error message bellow:
Undefined first referenced
symbol in file
__abbr_table_1.1 ... (0 Replies)
I know that IBM's official stance is that NIM does not work on etherchannel environment, but has anyone able to get around it?
I'm working on a p5-590 LPAR system, and the NIM master and clients are all on the same frame.
Any help is appreciated. (1 Reply)
Hi, I recently research on how auto-mailing to notify the increase of storage size. I try avoid schedule/routine checkup the storage to determine increase the storage size. It is time-consuming. Any comment on how to get the storage size %? and automatically trigger mailing function instead... (16 Replies)
Hi all,
So I am on server 1, and I want to grab the newest file from a particular directory on server 2, and place this in a directory on server 1.
I am trying to use: ls -tr | tail -1
This works, and gets me the newest file in a particular directory. Using svn `ls -tr | tail -1` etc I... (1 Reply)
Unix Guys
i want to setup a lab in my house for learning, i want to setup and hacmp and a seperate server where i can setup 2 lpars and then cluster those 2 lpars and setup them up for failover
what is the cheapest way to achive this.
my objective is to learn hmc -> managed server via... (7 Replies)
I have a Solaris box that I need to enable outgoing email from alarm purposes. How do I do that so the command echo "test this email" | mailx test@address.com will go through?
---------- Post updated at 02:24 PM ---------- Previous update was at 02:04 PM ----------
Needed to open port 25/smtp... (1 Reply)
Hello,
I have been trying to setup a email server here at home, for me and a few friends. Nothing fancy, just a super basic - but secure - email server.
I have been having trouble over the course of the past 2-3 weeks fumbling through various online tutorials. It shouldn't be SO hard =)
... (0 Replies)
Hey all,
I've got an old HP9000 L1000 server with HP-UX installed. The drives that the OS is running on are in RAID0. I am concerned for the reliability of the server. The four hard drives in the front of the server are LVD 18.2 drives. I know with RAID0, if one drive fails, they all fail. ... (2 Replies)
Discussion started by: mroselli
2 Replies
LEARN ABOUT CENTOS
kbdrate
KBDRATE(8) Linux Programmer's Manual KBDRATE(8)NAME
kbdrate - reset the keyboard repeat rate and delay time
SYNOPSIS
kbdrate [ -s ] [ -r rate ] [ -d delay ]
DESCRIPTION
kbdrate is used to change the keyboard repeat rate and delay time. The delay is the amount of time that a key must be depressed before it
will start to repeat.
Using kbdrate without any options will reset the repeat rate to 10.9 characters per second (cps) and the delay to 250 milliseconds (ms) for
Intel- and M68K-based systems. These are the IBM defaults. On SPARC-based systems it will reset the repeat rate to 20 cps and the delay to
200 ms.
OPTIONS -s Silent. No messages are printed.
-r rate
Change the keyboard repeat rate to rate cps. For Intel-based systems, the allowable range is from 2.0 to 30.0 cps. Only certain,
specific values are possible, and the program will select the nearest possible value to the one specified. The possible values are
given, in characters per second, as follows: 2.0, 2.1, 2.3, 2.5, 2.7, 3.0, 3.3, 3.7, 4.0, 4.3, 4.6, 5.0, 5.5, 6.0, 6.7, 7.5, 8.0,
8.6, 9.2, 10.0, 10.9, 12.0, 13.3, 15.0, 16.0, 17.1, 18.5, 20.0, 21.8, 24.0, 26.7, 30.0. For SPARC-based systems, the allowable
range is from 0 (no repeat) to 50 cps.
-d delay
Change the delay to delay milliseconds. For Intel-based systems, the allowable range is from 250 to 1000 ms, in 250 ms steps. For
SPARC systems, possible values are between 10 ms and 1440 ms, in 10 ms steps.
-V Display a version number and exit.
BUGS
Not all keyboards support all rates.
Not all keyboards have the rates mapped in the same way.
Setting the repeat rate on the Gateway AnyKey keyboard does not work. If someone with a Gateway figures out how to program the keyboard,
please send mail to util-linux@math.uio.no.
All this is very architecture dependent. Nowadays kbdrate first tries the KDKBDREP and KIOCSRATE ioctls. (The former usually works on an
m68k machine, the latter for SPARC.) When these ioctls fail an ioport interface as on i386 is assumed.
FILES
/etc/rc.local
/dev/port
/dev/kbd
Linux 1.1.19 22 June 1994 KBDRATE(8)