Recently I discovered how to access the 'ok' prompt on my E450. (Thanks DukeNuke2)
And so I've been running tests, checking the system out... (since until now I've not known how to get to the 'ok' prompt) And came across
and
as well as
and
in POST diag.
So I opened up the system and checked the memory... There is in fact memory installed in bank 3, the same as 2, 1 and 0... All units appear to be in perfect physical condition and inserted properly. Which leads me to believe it could be a setup issue.
Is there anything which could cause this? are there any tests I can run to check the memory? Any tips anyone could give?
Thanks in advance.
Last edited by SomeoneTwo; 08-25-2013 at 04:31 AM..
Reason: Problem resolved.
Hi guys,
I'm new to solaris, and need to change damaged memory
Server is 280R
I get this output from fmdump:
bash-3.00# fmdump -v -u a645d6ef-7348-6619-d9d0-dcf80c069a94
TIME UUID SUNW-MSG-ID
Sep 21 00:18:50.9350... (4 Replies)
Hi,
Server AIBVRFCC failed POST while booting on 06/28/2009. Server is up, but OS cannot see two CPUs (CPU 0 and CPU 2) and half of the installed system memory (8 GB is physically installed but only 4 GB is seen by OS now).
bld00016:root psrinfo
1 on-line since 06/28/09 05:51:36
3 on-line... (1 Reply)
there seems not to be error in this segment. In some computers, it can work well. But in others, it will give a failure.
why it ocurrs and how to deal with it?
in a function:
if( *ver == NULL ) {
*ver = (vertex *) malloc(sizeof(vertex)); //this line
... (17 Replies)
*** glibc detected *** ./a.out: malloc(): memory corruption (fast):
Posted A minute ago
M trying to make multiway tree and dont know what happend when this part of code get executed:
01void ins(NODE *ptr)
02{
03 //working
04 if(ptr!=NULL)
05 {
06 SNODE *var=NULL;
07 var=(SNODE... (3 Replies)
I am using libxml2 library for XMl parsing and libxml++ is C++ wrapper over that. So I am using API of libxml++. I am creating my class and composing instance xmlpp::Node *pNode in that. my class also have funciton prepareXPathQuery() which creates query string and have other fucntion... (2 Replies)
I am facing a problem of memory corruption. The loop runs for the first time but does not go through the second time. What could be the problem?
for(int z=0;z<2;z++)
{
fp=fopen("poly.dat","r");
/*do something which reads this file into a 2D array*/
fclose(fp);
... (10 Replies)
I am working in IT company working for banks.I find hardly to get technology about bank IT on the internet.Consider banks all using Unix, I think I can get some help here.
Recommend some sits or books about bank IT will be very helpful!! (0 Replies)
Discussion started by: hhdzhu
0 Replies
LEARN ABOUT LINUX
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)