I think your result printed above is wrong. The 22 subnet of 192.168.1.0 is
, so the 23 subnets would be 192.168.0 and 192.168.2, and the 24 subnets were 192.168.0..3.
The .4 would definitely be in another subnet range!
---------- Post updated 21-08-13 at 00:27 ---------- Previous update was 20-08-13 at 22:29 ----------
EDIT: Try this (needs bash, not sure about other shells):
Run like
We have two Sun Sparc systems running on the xxx.xxx.1.xxx network and can be access fine by machines on that subnet. We are able the ping one of the machines from the xxx.xxx.2.xxx network, but we are not able to ping or communicate with the other machine on the (1) subnet from the (2) subnet.
... (8 Replies)
All,
I have a pSeries 550 and several Xerox printers I need to print to from there. I can define the printers via the Xerox "xpadmin" utility for all the machines locally (in my building, .244.xxx subnet), but if I go to a different subnet (say .131.xxx) I can not apply any changes.
I can... (1 Reply)
I have a routing problem that I need to solve for both Windows and Linux.
In our test lab, I've set up a small network that is separated from the rest of the work by a firewall. One interface is on the 15.8.152 network, the other is on the 192.168.100 network.
I can already get to the... (2 Replies)
I have two networks which is not connected to each other. Each network has its own internet connection. I also have one Solaris machine with two NICs connected to both of the networks.
How do I use the Solaris to connect both network so that hosts from either side of the network can... (9 Replies)
Hi,
My project needs to migrate the existing Subnet (255.255.255.0) to a new subnet and change the ipaddresses (currently C class). How can I do that. I need some information.
John (0 Replies)
Greetings,
Having an issue with a multihomed global zone hosting zones on different subnets.
The issue is with the dev zone that is hosted on the non-default network.
Any help, other than going to exclusive IP, as I have one card for admin ntwk for both zones, would be appreciated.
... (1 Reply)
Hi guys
I started to work in a small company which doesn't have infrastructure and I need to built it.
My problem is: I am a student with theoretical knowledge but without practical one so I don't have any ideas how to solve my problem.
I installed on CentOS 6.4 DNS and DHCP. This... (1 Reply)
Bash script to subdivide a given subnet into a pre-defined number of smaller subnets. Show network/broadcast address, number of hosts and assign gateway.
For example:
Input:
./subnetter.sh 192.168.0.0/24 3 Output:
192.168.0.0/128 subnet 192.168.0.0 broadcast 192.168.0.127 gateway... (1 Reply)
Bash script to subdivide a given subnet into a pre-defined number of smaller subnets. Show network/broadcast address, number of hosts and assign gateway.
For example:
Input:
./subnetter.sh 192.168.0.0/24 3 Output:
192.168.0.0/128 subnet 192.168.0.0 broadcast 192.168.0.127 gateway... (1 Reply)
Discussion started by: mail2rias
1 Replies
LEARN ABOUT DEBIAN
tgt-setup-lun
tgt-setup-lun(8) System Manager's Manual tgt-setup-lun(8)NAME
tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target
SYNOPSIS
tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]
DESCRIPTION
Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.
The script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.
EXAMPLES
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82
Create a target that uses /dev/sdb1 and allows connections from any initiator:
tgt-setup-lun -d /dev/sdb1 -n my_target
Display help:
tgt-setup-lun -h
AUTHOR
Written by Erez Zilber
REPORTING BUGS
Report bugs to <stgt@vger.kernel.org>
COPYRIGHT
Copyright (C) Voltaire Ltd. 2008.
tgt-setup-lun(8)