08-08-2013
Ok guys i figured it out... the system had SVM mirroring and I was booting from the wrong disk.
This User Gave Thanks to abohmeed For This Post:
10 More Discussions You Might Find Interesting
1. Solaris
Hi,
I've just bought an Ultra 60 running solaris 9 (or so I've been led to believe). When I start up, it looks for a (presumably) domain/network to hook up to and the following messages are displayed:
Boot device: net file and args:
Network link setup failed
Please check cable and try... (3 Replies)
Discussion started by: alarmcall
3 Replies
2. AIX
Hi all ,
i was trying to upgrade firmware on machine 7028-6E4 and it failed .
Now machine does not boot anymore , i can not get SMC menu either ...
What are my options ?
Thanks,
Rahim (1 Reply)
Discussion started by: rahim
1 Replies
3. Solaris
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies
4. Solaris
I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the... (0 Replies)
Discussion started by: zosojohnny
0 Replies
5. UNIX for Dummies Questions & Answers
I'm trying to install Fedora 9 on a Dell OptiPlex GX300 machine. The instalation runs properly, but when the computer restarts after the instalation, it simply won't boot, like there's no OS installed.
I tried diffrent Linux distributions, but nothing works.
This are the partitions, maybe it's... (12 Replies)
Discussion started by: teis
12 Replies
6. AIX
Hello:
NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD... (11 Replies)
Discussion started by: bbird
11 Replies
7. UNIX for Dummies Questions & Answers
Folks;
My SUN Ultra 10 5.9 won't boot. It only stops after counting the memory on the white screen then hangs there with nothing. even the power button won't take it down from there, i had to unplug it then re-plug it again.
i inserted a disk with Solaris 9 iso trying to rebuild it but nothing... (1 Reply)
Discussion started by: Katkota
1 Replies
8. UNIX for Dummies Questions & Answers
I compiled new kernel in linux 10.04 called linux-2.6.26.8-xenomai, it runs alongside the other kernel, but when I want to boot it I get an error message saying:
Missing modules (cat /proc/modules; ls /dev)
ALERT! /dev/sda5 does not exist.
After making the modules and headers
I made the... (4 Replies)
Discussion started by: mdop
4 Replies
9. HP-UX
Hello,
I have a very old hp rp2450 running 11i2 that I had to power off. When turning it back on it hangs with the following message. Would booting into SUM get me any further? I've never used SUM, so I'm asking before I go down that rabbit hole.
Thanks for the help.
#
## extra content... (1 Reply)
Discussion started by: calabaria
1 Replies
10. UNIX for Beginners Questions & Answers
I plugged both power cables in both power supply. When I unplugged each power cable one by one, the SPARC T4-1 machine keep running. However, show faulty command shows below message. (I have also attached the picture of both power supply)
-> show faulty
Target ... (1 Reply)
Discussion started by: z_haseeb
1 Replies
mdlogd(1M) System Administration Commands mdlogd(1M)
NAME
mdlogd - Solaris Volume Manager daemon
SYNOPSIS
mdlogd
DESCRIPTION
mdlogd implements a simple daemon that watches the system console looking for messages written by the Solaris Volume Manger. When a Solaris
Volume Manager message is detected, mdlogd sends a generic SNMP trap.
To enable traps, you must configure mdlogd into the SNMP framework. See Solaris Volume Manager Administration Guide.
USAGE
mdlogd implements the following SNMP MIB:
SOLARIS-VOLUME-MGR-MIB DEFINITIONS ::= BEGIN
IMPORTS
enterprises FROM RFC1155-SMI
DisplayString FROM SNMPv2-TC;
-- Sun Private MIB for Solaris Volume Manager
sun OBJECT IDENTIFIER ::= { enterprises 42 }
sunSVM OBJECT IDENTIFIER ::= { sun 104 }
-- this is actually just the string from /dev/log that
-- matches the md: regular expressions.
-- This is an interim SNMP trap generator to provide
-- information until a more complete version is available.
-- this definition is a formalization of the old
-- Solaris DiskSuite mdlogd trap mib.
svmOldTrapString OBJECT-TYPE
SYNTAX DisplayString (SIZE (0..255))
ACCESS read-only
STATUS mandatory
DESCRIPTION
"This is the matched string that
was obtained from /dev/log."
::= { sunSVM 1 }
-- SVM Compatibility ( error trap )
svmNotice TrapTRAP-TYPE
ENTERPRISE sunSVM
VARIABLES { svmOldTrapString }
DESCRIPTION
"SVM error log trap for NOTICE.
This matches 'NOTICE: md:'"
::= 1
svmWarningTrap TRAP-TYPE
ENTERPRISE sunSVM
VARIABLES { svmOldTrapString }
DESCRIPTION
"SVM error log trap for WARNING..
This matches 'WARNING: md:'"
::= 2
svmPanicTrap TRAP-TYPE
ENTERPRISE sunSVM
VARIABLES { svmOldTrapString }
DESCRIPTION
"SVM error log traps for PANIC..
This matches 'PANIC: md:'"
::= 3
END
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWlvma, SUNWlvmr |
+-----------------------------+-----------------------------+
|Interface Stability |Obsolete |
+-----------------------------+-----------------------------+
SEE ALSO
snmpdx(1M), attributes(5)
Solaris Volume Manager Administration Guide
SunOS 5.10 3 Jun 2004 mdlogd(1M)