Sponsored Content
Operating Systems Solaris System won't boot... syseventd is faulty Post 302842273 by abohmeed on Thursday 8th of August 2013 08:28:59 PM
Old 08-08-2013
System won't boot... syseventd is faulty

Dear all

I have a SPARC solaris 5.10 system. I did something very silly while editing the vfstab file I modified the root (/) filesystem mount point setting to be
Code:
/dev/dsk/c0t0d0s0      /dev/rdsk/c0t1d0s0

notice the difference.
When I rebooted the system it fails with a service called syseventd failing to start and forcing me to maintenance mode. Of course i mounted the filesystem in maintenance mode and modified the vfstab file but the problem is still there.
Any help?
 

10 More Discussions You Might Find Interesting

1. Solaris

Solaris (9) won't boot!

Hi, I've just bought an Ultra 60 running solaris 9 (or so I've been led to believe). When I start up, it looks for a (presumably) domain/network to hook up to and the following messages are displayed: Boot device: net file and args: Network link setup failed Please check cable and try... (3 Replies)
Discussion started by: alarmcall
3 Replies

2. AIX

server won't boot

Hi all , i was trying to upgrade firmware on machine 7028-6E4 and it failed . Now machine does not boot anymore , i can not get SMC menu either ... What are my options ? Thanks, Rahim (1 Reply)
Discussion started by: rahim
1 Replies

3. Solaris

cannot find boot device and won't boot off cdrom

I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
Discussion started by: kymberm
3 Replies

4. Solaris

Ultra 60 won't boot

I just was given an Ultra 60 that I'm trying to get started so that I can re-load the system with Solaris 10. I can't seem to get the system to boot past the initial memory check. I've tried to do an Stop-A to get to the eeprom, but can't do that. My next step is to try to send a break from the... (0 Replies)
Discussion started by: zosojohnny
0 Replies

5. UNIX for Dummies Questions & Answers

Linux won't boot

I'm trying to install Fedora 9 on a Dell OptiPlex GX300 machine. The instalation runs properly, but when the computer restarts after the instalation, it simply won't boot, like there's no OS installed. I tried diffrent Linux distributions, but nothing works. This are the partitions, maybe it's... (12 Replies)
Discussion started by: teis
12 Replies

6. AIX

won't mount /usr...won't boot fully

Hello: NOOB here. I attempted to use smit mkcd. Failed on first attempt, not enough space. 2nd attempt tried to place iso on /usr, not enough space there. Cleanup ran for about 5 minutes after aborting. Now AIX won't boot. LCD display on 7029-6E3 says: 0517 MOUNT /USR. Attempted to boot from CD... (11 Replies)
Discussion started by: bbird
11 Replies

7. UNIX for Dummies Questions & Answers

SUN Ultra 10 won't boot - Help Please

Folks; My SUN Ultra 10 5.9 won't boot. It only stops after counting the memory on the white screen then hangs there with nothing. even the power button won't take it down from there, i had to unplug it then re-plug it again. i inserted a disk with Solaris 9 iso trying to rebuild it but nothing... (1 Reply)
Discussion started by: Katkota
1 Replies

8. UNIX for Dummies Questions & Answers

New kernel won't boot

I compiled new kernel in linux 10.04 called linux-2.6.26.8-xenomai, it runs alongside the other kernel, but when I want to boot it I get an error message saying: Missing modules (cat /proc/modules; ls /dev) ALERT! /dev/sda5 does not exist. After making the modules and headers I made the... (4 Replies)
Discussion started by: mdop
4 Replies

9. HP-UX

File system full, won't complete boot

Hello, I have a very old hp rp2450 running 11i2 that I had to power off. When turning it back on it hangs with the following message. Would booting into SUM get me any further? I've never used SUM, so I'm asking before I go down that rabbit hole. Thanks for the help. # ## extra content... (1 Reply)
Discussion started by: calabaria
1 Replies

10. UNIX for Beginners Questions & Answers

Show faulty shows PS1 faulty

I plugged both power cables in both power supply. When I unplugged each power cable one by one, the SPARC T4-1 machine keep running. However, show faulty command shows below message. (I have also attached the picture of both power supply) -> show faulty Target ... (1 Reply)
Discussion started by: z_haseeb
1 Replies
mount_pcfs(1M)						  System Administration Commands					    mount_pcfs(1M)

NAME
mount_pcfs - mount pcfs file systems SYNOPSIS
mount -F pcfs [generic_options] [-o FSType-specific_options] special | mount_point mount -F pcfs [generic_options] [-o FSType-specific_options] special mount_point DESCRIPTION
mount attaches an MS-DOS file system (pcfs) to the file system hierarchy at the mount_point, which is the pathname of a directory. If mount_point has any contents prior to the mount operation, these are hidden until the file system is unmounted. If mount is invoked with special or mount_point as the only arguments, mount will search /etc/vfstab to fill in the missing arguments, including the FSType-specific_options; see mount(1M) for more details. The special argument can be one of two special device file types: o A floppy disk, such as /dev/diskette0 or /dev/diskette1. o A DOS logical drive on a hard disk expressed as device-name:logical-drive , where device-name specifies the special block device-file for the whole disk and logical-drive is either a drive letter (c through z) or a drive number (1 through 24). Examples are /dev/dsk/c0t0d0p0:c and /dev/dsk/c0t0d0p0:1. The special device file type must have a formatted MS-DOS file system with either a 12-bit, 16-bit, or 32-bit File Allocation Table. OPTIONS
generic_options See mount(1M) for the list of supported options. -o Specify pcfs file system specific options. The following options are supported: foldcase|nofoldcase Force uppercase characters in filenames to lowercase when reading them from the filesystem. This is for compatibility with the pre- vious behavior of pcfs. The default is nofoldcase. FILES
/etc/mnttab table of mounted file systems /etc/vfstab list of default parameters for each file system ATTRIBUTES
See attributes(5) for descriptions of the following attributes: +-----------------------------+-----------------------------+ | ATTRIBUTE TYPE | ATTRIBUTE VALUE | +-----------------------------+-----------------------------+ |Availability |SUNWesu | +-----------------------------+-----------------------------+ SEE ALSO
mount(1M), mountall(1M), mount(2), mnttab(4), vfstab(4), attributes(5), pcfs(7FS) NOTES
If the directory on which a file system is to be mounted is a symbolic link, the file system is mounted on the directory to which the sym- bolic link refers, rather than on top of the symbolic link itself. SunOS 5.10 24 Nov 2003 mount_pcfs(1M)
All times are GMT -4. The time now is 08:25 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy