Stty: : No such device or address Post: 302841353

7 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

stty: : No such device or address

I encoutered the error "stty: : No such device or address" in the korn shell script log. I added STTY EARSE ^H in profile. why iam i getting that error in Korn shell Thanks nandinisagar

2. UNIX for Dummies Questions & Answers

"/dev/rmt/0: No such device or address" when using mt command

/dev/rmt/0: No such device or address I get this when I do a "mt -f /dev/rmt/0 rewind" This is on a Solaris 7 system. I tried devfsadm -c tape and drvconfig ; tape and both didn't work. Help please....... :confused:

3. UNIX for Dummies Questions & Answers

Device Probe freezes after detecting Ethernet address while installing FreeeBSD 7.0

I'm trying to install FreeBSD 7.0 from CDs I made a few months ago on a brand new system with parts I just got in from NewEgg. I select the default option from the Boot Loader and it goes into the device probe. Several devices are recognized, but then it freezes at: mskc0: <Marvell Yukon...

4. Solaris

sar : insufficient address space to load xxxx device records

Hello, i am using Solaris 10, The sar running in my system might be corrupted, but not sure why as there has been no updates to it ( to the best of my knowledge) and it was working fine until few days back. If i try to get sar reports using sar -o <filename> 60 180 there is no error but the...

5. Red Hat

Unable To Activate Ethernet Network Device in RHEL 5.5 - e100 device eth0 does not seem to be presen

Hi All, Could anyone please help to resolve the below problem. I installed RHEL5.5 in my desktop.But when i try to activate the ethernet connection then it gives me the error. I spent 2 days for the above and go through with several suggestion found by googling. But no luck. ...

6. Debian

Problem configuring IP address on remote device

I need to add a printer with Ethernet to my local network. The default IP address in the printer is 0.0.0.0 and I need to change it to a 192.168.0.x address. I have previously temporarily changed the IP address of a computer (with ifconfig) to an address similar to the new device and changed the...

7. HP-UX

Failed to open tape device /dev/rmt/0mn:Device busy (errno = 16)

Hi, Unable to make tape backup, please help. /opt/ignite/bin/make_tape_recovery -a /dev/rmt/?mn -I -v -m tar -x inc_entire=vg00 * Creating local directories for configuration files and archive. ======= 04/25/16 16:28:08 IST Started /opt/ignite/bin/make_tape_recovery. (Mon...

LEARN ABOUT BSD

httppower

httppower(8)							     powerman							      httppower(8)

NAME

       httppower - communicate with HTTP based power distribution units

SYNOPSIS

       httppower [--url URL]

DESCRIPTION

       httppower  is  a  helper program for powerman which enables it to communicate with HTTP based power distribution units.	It is run interac-
       tively by the powerman daemon.

OPTIONS

       -u, --url URL
	      Set the base URL.

INTERACTIVE COMMANDS

       The following commands are accepted at the httppower> prompt:

       auth user:pass
	      Authenticate to the base URL with specified user and password, using ``basic'' HTTP authentication which sends the user and password
	      over the network in plain text.

       seturl URL
	      Set the base URL.  Overrides the command line option.

       get [URL-suffix]
	      Send an HTTP GET to the base URL with the optional URL-suffix appended.

       post [URL-suffix] key=val[&key=val]...
	      Send an HTTP POST to the base URL with the optional URL-suffix appended, and key-value pairs as argument.

FILES

       /usr/sbin/httppower
       /etc/powerman/powerman.conf

ORIGIN

       PowerMan was originally developed by Andrew Uselton on LLNL's Linux clusters.  This software is open source and distributed under the terms
       of the GNU GPL.

SEE ALSO

       powerman(1), powermand(8), httppower(8), plmpower(8), vpcd(8), powerman.conf(5), powerman.dev(5), powerman-devices(7).

       http://sourceforge.net/projects/powerman

powerman-2.3.5							    2009-02-09							      httppower(8)

7 More Discussions You Might Find Interesting

1. Shell Programming and Scripting