I have a Debian server (192.168.1.1) connected through ethernet to a RS232 device servers (192.168.1.5) that is then connected through RS232 to a Video Projector.
The idea is that I want to send commands to the video projector (eg. turn on/off) via the device server.
I tried
Do you have any idea on how I should do that?
== edit start =========================
I found out that if I use UDP mode, the connection is accepted but freezes.
I have to press Ctrl+C to return to tty:
== edit end ===========================
Regards
Santiago
Last edited by chebarbudo; 07-23-2013 at 01:54 PM..
Hi,
I am an absolute beginner in Unix and I need to send a commands to a program
I have created a script that will let me login to the program, however, i cannot get the script to send commands to this program.
When the cript logs into the program, the display/ prompt is as follows:
1>... (1 Reply)
We're using Kermit 8.0.209 in Linux environment. We're trying to invoke kermit from an application, send some AT commands and receive the responses from the End terminals like mobiles/modems. We access these deivces through serial ports.
For eg., to send a file we use command-line options like... (4 Replies)
Hi,
I'm trying to make an SSH into a SGSN node and collect some commands printouts.:confused:
I really don't know how this can be done.
I think it must be like this:
#!/bin/bash
ssh user@192.168.88.10
Then I must enter the password, but I don't know how to do it, I tried with:
echo... (3 Replies)
Dear friends
I'm looking for a solution to log all commands that users do in my RedHat box, and send it out to other remote server,
Is there any guide for that
Thanks
---------- Post updated at 04:20 AM ---------- Previous update was at 03:47 AM ----------
I can think of something else
I... (7 Replies)
This is my situation
DOS pc serial cable (sl0) Linux Pc eth1
192.168.0.10 <-------------------->192.168.0.2 <------------>192.168.0.1 (router)
I connected the linux pc and the dos pc with a SLIP (serial line internet protocol), so they can communicate in the sl0 interface.
... (3 Replies)
hey guys,
I've done some searching and other than winexe I haven't been able to find a way to send remote commands to a windows machine. The problem I get is with winexe whenever you send the process to the background in a script, I get the following error. :wall: Any help is appreciated!
... (0 Replies)
hey frns pls help me out !!
i hav a code of c that i have to include in my project.
i am using a device (geomeda) that has unix based OS. it also support SIM card for connecting to server . I need to send SMS to user from this device..
below code is not working .. i am unable to send sms and the... (7 Replies)
i have connected with my board through serial interface using minicom and i am running a bash script, which should test ethernet (ping test), USB read/write, RS232 ..
I have managed to test ethernet and USB read/write.
I test ethernet with ping.
I test USB read/write, using dd and verifying... (10 Replies)
Hello All,
I've been working on something which requires a dialup USB Modem. I have been using minicom with success entering "AT Commands" directly into
the terminal window that shows after running the minicom command. I had already configured the modem through minicom and was able to... (2 Replies)
I have a london-electronics LED sign I picked up on eBay which I would like to display custom messages on programmatically. It is working ok.
Opening it up, it has an ethernet to serial connection currently plugged in and a serial connection currently unplugged internally (same connectors).... (9 Replies)
Discussion started by: windswept321
9 Replies
LEARN ABOUT SUSE
tgt-setup-lun
tgt-setup-lun(8) System Manager's Manual tgt-setup-lun(8)NAME
tgt-setup-lun - creates a target, adds a device to the target and defines initiators that can connect to the target
SYNOPSIS
tgt-setup-lun -d device -n target_name [initiator_IP1 initiator_IP2 ...] [-h]
DESCRIPTION
Starts tgtd if necessary and creates a target according to the supplied target_name. The format of the target name is as follows:
iqn.2001-04.com.<hostname>-<target_name> The target name must be unique.
The script then adds the requested device to the target. If specific IP addresses are defined, it adds them to the list of allowed initia-
tors for that target. If no IP addresses is defined, it defines that the target accepts any initiator.
EXAMPLES
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81:
tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81
Create a target that uses /dev/sdb1 and allows connections only from 192.168.10.81 and 192.168.10.82:
tgt-setup-lun -d /dev/sdb1 -n my_target 192.168.10.81 192.168.10.82
Create a target that uses /dev/sdb1 and allows connections from any initiator:
tgt-setup-lun -d /dev/sdb1 -n my_target
Display help:
tgt-setup-lun -h
AUTHOR
Written by Erez Zilber
REPORTING BUGS
Report bugs to <erezz@voltaire.com>.
COPYRIGHT
Copyright (C) Voltaire Ltd. 2008.
tgt-setup-lun(8)