I would look for suitable device names in /dev:
man pages might give a hint, too.
Another problem might be that the filesystem on the floppy is Windows-fat, not ufs or sysv. Then the mount will fail. A Linux box can help to translate between the different formats.
Hi...
question is this:
How do I mount an LVD hotswap scsi drive in bay #2 on a netra using the mount command? volmgt doesn't seem to mount it and/or I don't know how to view the drives data if it's formatted which it may not be. This drive is not new out of the box so I'm not sure.
... (4 Replies)
My FreeBSD install at ad0s1, and Windows 2000 at ad2s1.
Everytime I start my FreeBSD, it shows me this message:
fdc0: cmd 3 failed at out byte 1 of 3
pmtimer 0 on isa0
fdc0: cannot reserve I/O port range (6 ports)
My Floppy drive info:
0x03F2 - 0x03F3
0x03F4 - 0x03F5
0x03F7 - 0x03F7... (6 Replies)
Anybody know how to mount a floppy in BSDi3 UNIX? Have tried all the standard commands with no luck. This includes:
mount /dev/fd0 /mnt/floppy
mount /mnt/floppy (3 Replies)
I have installed SUSE 10 on a laptop that has a swappable CDROM/Floppy drive. When I was installing the OS my CDROM was connected. Later I tried to swap it with the Floppy and mount it but no success. Here is what I get:
dell:/dev # mount -t msdos /dev/fd0 /mnt
/dev/fd0: Invalid argument
... (0 Replies)
Hi there,
I never touch a AIX because i'm used to work on FreeBSD.
I'll have to copy some file from a floppy to an AIX.
Just to be sure is the mount command the same ?
I mean a simple
mount /dev/fd0 /floppy should work ?
Thanks :) (1 Reply)
Hi, I would like to be able to mount windows xp to a unix system, so that I can pull data from windows machine for backup and store it on the unix server. Does anyone know how I can go about mounting the windows drive in unix.
Thanks,
Eric (4 Replies)
I have inserted a diskette but I don't see the files nor the floppy drive.
These are the commands I ran.
#volcheck -v
#rmformat
With rmformat, only the CD-ROM is listed. I don't see any floppy drive.
How can I get my floppy drive to work?? I know it is connected b/c when I boot in XP, I... (0 Replies)
We are trying to mount a Unix share drive on a Windows 2003 server to avoid transfering files accross the network using sftp. I can see shared drives on the Solaris server using the "share" command. How can I mount the drives on my Windows server so that I can read them directly. Do I need... (2 Replies)
Discussion started by: rbdenham
2 Replies
LEARN ABOUT DEBIAN
irsend
IRSEND(1) User Commands IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.9.0-pre1 October 2010 IRSEND(1)